A method was developed for the synthesis of 5-carbethoxy-4-formyl-1,2,3-thiadiazole (I), its isomer (II); 5-benzoyl-4-formyl-1,2,3-thiadiazole (III), and its isomer (IV). It was demonstrated that although compounds I, III and IV with hydrazine gave 7H-1,2,3-thiadiazolo[4,5-d]-pyridazin-7-one (XXII), 7-phenyl-1,2,3-thiadiazolo[4,5-d]pyridazine (XXIII) and 4-phenyl-1,2,3-thiadiazolo[4,5-d]pyridazine (XXV), respectively; however, compound I gave its corresponding hydrazone (XXIV). 相似文献
The chemical durability of lead glass tumblers (24% PbO) in a 4% (v/v) acetic acid solution before and after coating with sol-gel derived SiO2 films was assessed to determine the extent of reduction in Pb-leaching that can be achieved. It was found that by coating the internal surface of the glass tumblers with 1 ml of 10% TEOS solutions at 100°C and densifying the coating formed at 500°C for 1 h, it was possible to reduce Pb-leaching to about one quarter of that of the uncoated glass. 相似文献
High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants
(stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol
(60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was
less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and
detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range
and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due
to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method.
Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants
in commercial polymers (0.05–0.2%). 相似文献
The dependence of Mentha pulegium L. (pennyroyal) essential oil composition, obtained by supercritical carbon dioxide (SC-CO2), with the following parameters: pressure, temperature, extraction time (dynamic), and modifier (methanol) was studied. The results were also compared with those obtained by conventional hydrodistillation method in laboratory conditions. Regarding the percentages of menthone (30.3%) and pulegone (52.0%), the optimum SFE results were obtained at the following experimental conditions: pressure=100 atm, T=35 °C, dynamic time=10 min, and Vmodifier=0 μl. The results of hydrodistillation showed that the major components of M. pulegium L. were pulegone (37.8%), menthone (20.3%), and piperitenone (6.8%). The evaluation of the composition of each extract was performed by gas chromatography-mass spectrometry. 相似文献
The vehicle routing problem (VRP) is a combinatorial optimization management problem that seeks the optimal set of routes traversed by a vehicle to deliver products to customers. A recognized problem in this domain is to serve ‘prioritized’ customers in the shortest possible time where customers with known demands are supplied by one or several depots. This problem is known as the Vehicle Routing with Prioritized Customers (VRPC). The purpose of this work is to present and compare two artificial intelligence-based novel methods that minimize the traveling distance of vehicles when moving cargo to prioritized customers. Various studies have been conducted regarding this topic; nevertheless, up to now, few studies used the Cuckoo Search-based hyper-heuristic. This paper modifies a classical mathematical model that represents the VRPC, implements and tests an evolutionary Cuckoo Search-based hyper-heuristic, and then compares the results with those of our proposed modified version of the Clarke Wright (CW) algorithm. In this modified version, the CW algorithm serves all customers per their preassigned priorities while covering the needed working hours. The results indicate that the solution selected by the Cuckoo Search-based hyper-heuristic outperformed the modified Clarke Wright algorithm while taking into consideration the customers’ priority and demands and the vehicle capacity.
Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature. 相似文献
A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater). 相似文献
Protection of various thiols with diphenylmethanol was achieved in high yields at room temperature using catalytic amounts of AlPW12O40 in CH2Cl2. In the presence of this catalyst, protection of SH versus OH was achieved with high chemoselectivity and yields. The catalyst can be easily recovered and reused. Deprotection of DPM thioethers was also achieved using molecular iodine at reflux in CH2Cl2 in high yields. 相似文献
Ciprofloxacin is used in the treatment of bacterial infections. Because ciprofloxacin is not effectively degraded by biological processes, advanced oxidation processes such as photocatalytic ozonation are applied to remove this antibiotic from wastewater. The aim of this study was to investigate photocatalytic ozonation for the removal of ciprofloxacin from aquatic environments and optimization of the effective parameters of the process. For this purpose, ZnO nanoparticles were synthesized using the thermal method and immobilized on the surface of stones. The structural properties of the nanoparticles were determined by XRD, TEM, Photoluminescence (PL) and SEM. Experiments were carried out in a Plexiglas reactor supported with the continuous injection of ozone. The effective parameters for removal efficiency were reaction time, initial concentration of ciprofloxacin, pH, photocatalyst concentration and reaction kinetics. The highest ciprofloxacin removal efficiency occurred at the following optimal conditions: pH of 7, reaction time of 30?min, photocatalyst concentration of 3?g/L and initial ciprofloxacin concentration of 10?mg/L. Removal efficiency of 96% was obtained under these conditions. Linear kinetic models showed that the process followed pseudo-first order and Langmuir-Hinshelwood kinetics. This process had a high removal efficiency and suitable for removal of ciprofloxacin from aquatic environments.GRAPHICAL ABSTRACT 相似文献
A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts. 相似文献