Wafer and epilayer improvement for integrated optics devices on InP: the ESPRIT project 2518

Ga _x In_1–x As _y P_1–y alloys lattice matched to InP substrates are currently used to fabricate optoelectronic and integrated optics devices. To achieve devices with high performances and high fabrication yield, the uniformity and reproducibility of the Ga _x In_1–x As _y P_1–y epitaxial layers (composition, thickness, doping, etc.) have become key parameters. These problems have been addressed in the frame of ESPRIT project 2518 and are presented in this paper. Several aspects have been considered starting from the optimization of InP substrates, the MOVPE growth of uniform GalnAsP layers, the material characterization to the validation of material uniformity on passive optical waveguides. Both scanning photoluminescence analysis and waveguide losses measurements performed on 2 inch wafers with a high lateral resolution have shown that high quality uniform GalnAsP layers can be obtained reproducibly on 2 InP substrates using a commercially available LP-MOCVD growth process. In particular, more than 60% of 36 mm long, 3m wide and 100m spaced rib waveguides exhibit losses below 0.8dBcm^–1.     

Parameter variation in low-quartz between 94 and 298K

The structure of low quartz has been refined at 94, 115, 150, 190, 240 and 298K using Mo Kα intensities up to 2θ = 90° with residuals around 1.25%. The major structural change from 94 to 298K is an increase of the SiOSi angle from 142.69(4) to 143.65(5) corresponding to a rotation by ～0.8° of a rigid SiO₄ tetrahedron around the crystallographic 2-axis through its central Si. The orientations of the principal axes of vibration of Si and O do not change significantly with temperature. The temperature dependence of the mean-square displacement of O along its principal axes follows the Debye formula of thermal motion quite well, while for Si the experimental slopes are significantly less than their calculated values.     

Proprietes magnetiques et electriques de la phase Ca2MnO4−xFx

The magnetic properties of the antiferromagnetic Ca₂MnO_4?x solid solution (0?x?0,30) are essentially characterized by a weak ferromagnetism with a maximum value for x = 0,20. Spin canting results from the competition between the antiferromagnetic super-exchange couplings and the double exchange ferromagnetic interactions due to the presence of manganese in oxidation states + III and + IV. It seems independent of the site of fluorine in the framework. The variation of Weiss constant and ordering temperature withx is also discussed. Electrical conductivity results from a hopping mechanism between Mn³⁺ and Mn⁴⁺ ions. The electrical conductivity presents a maximum when x = 0.10, corresponding to an activation energy minimum.     

HL-2M 装置真空室设计

HL-2M 真空室结构为“D”形截面的双层-薄壁-全焊接式-环状结构,内环直径 2m,外环径 5.22m, 高 3.02m,由 20 个扇形段组成而成。真空室上开设有 121 个窗口以满足真空抽气、实验诊断、辅助加热及工程安 装等方面的要求;支撑采用滑动杆式结构;材料选用 Inconel625、Inconel718 与 316L 组合。运用有限元法对真空 室进行了结构强度评估,真空室满足设计要求。     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求,通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时,保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹;300℃时,导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时,冷面可控制在 85℃以下,线圈侧的 温度低于 60℃,整体热损失小于 12kW,满足 HL-2M 真空室烘烤需求。      

Many-body correlations for Raman and Rayleigh collision induced scattering

In this paper, the spectral shape of the collision induced scattering is calculated in the dipole-induced-dipole approximation for the Raman symmetric vibrational band of optically isotropic molecules. Comparison is made with Rayleigh results. Experimental data for Rayleigh and v ₁ Raman band of CF₄ are discussed.     

Using monomer properties to obtain integrated intensities for vibrational transitions of van der Waals complexes

The integrated intensities of vibrational transitions depend on the magnitude of the derivatives of the dipole with respect to nuclear motion. Normally, the only reliable way to compute such derivatives is by tedious and expensive ab initio calculations. In this paper, we present a simplification for weakly bound complexes based on distributed schemes for describing the charge densities and polarizabilities of the monomers. Formulations based on both Cartesian and spherical harmonics are presented. The results for both these schemes agree exactly with each other, and qualitatively with full ab initio calculations for the hydrogen fluoride dimer, (HF)₂.     

Optical pressure sensors for high-pressure–high-temperature studies in a diamond anvil cell

We review the various optical pressure sensors that are suitable for high-pressure and high-temperature studies in a diamond anvil cell. Two different kinds of sensors are considered: those based on the pressure shift of a fluorescence line (ruby, SrB₄O₇:Sm²⁺) and those based on the pressure shift of a Raman line (c-BN, diamond). The calibration of those sensors are presented in detail, and discussion is made on their useful pressure and temperature ranges.     

High pressure X-ray diffraction experiments on NpS and PUS up to 60 GPa

Abstract

Neptunium and plutonium monosulfides were studied under high pressure up to ～60 GPa using a diamond anvil cell in an energy dispersive X-ray diffraction facility. The compounds, of cubic rock salt structure type at ambient pressure, do not show any crystallographic phase transition in the domain of investigation. From the pressure-volume relationship, we determined bulk moduli of 92 and 120 GPa with pressure derivatives of 4.6 and 4.1 for NpS and PUS respectively.     

Bidirectional Wavelength Reconfigurable Module Based on Tunable Fiber Bragg Grating and Remote Pump Amplifier

Abstract

This article presents a novel bidirectional wavelength reconfigurable optical network utilizing a remotely pumped erbium-doped fiber amplifier and tunable fiber Bragg gratings. The system is experimentally demonstrated at a 10-Gb/s per channel over 20-km fiber span that verifies the metro-network range system performance. The achieved power penalty is less than 1 dB when compared to the back-to-back transmission link. An example of practical application where the proposed module is used as an add/drop multiplexer and a remote node in the bidirectional wavelength division multiplexing passive optical network system is described.