Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites

In this study, the influences of expanded graphite oxide (EG) nanosheets presence with and without surfactant on structural and thermal performance of poly(ethylene disulfide) (PEDS)-based nanocomposites are investigated. Sodium dodecylbenzenesulfonate (SDBS) is used as a surfactant for the preparation of modified-EG nanosheets. The structural, morphological, and thermal properties of prepared nanocomposites are studied using X-ray diffraction (XRD), scanning electron microscopy, and differential scanning calorimetry techniques, respectively. XRD patterns of nanocomposites reveal that a high degree of expanded graphite nanosheets dispersion is achieved with and without surface modification using in situ polymerization method. Moreover, the presence of immobilized polysulfide chains near the interface region of nanosheets is suggested as a possible reason for the observed increase in the number of semi-crystalline organic fractions in the structure of PEDS via EG nanosheets incorporation. In addition, the morphology of SDBS-modified-EG loaded nanocomposite shows a smoother fracture surface than unmodified-nanosheets reinforced nanocomposite. Therefore, more interactions between nanosheets and polysulfide chains are expected in the structure of unmodified-EG reinforced nanocomposite. Moreover, thermal resistance and degradation kinetics of prepared nanocomposites are studied using thermogravimetric analysis results and degradation activation energy calculations, respectively. The required activation energy for the degradation process of SDBS-EG loaded nanocomposite is about 140 kJ mol^?1 lower than the required degradation activation energy of unmodified-nanosheets reinforced nanocomposite.     

Synthesis of 4′-[3-methyl-5-thioxo-1H-1,2,4-triazol-4(5H)-yl]-2′,5′-diphenyl-2′,4′-dihydro spiro[indolin-3,3′[1,2,4]triazol]-2-one derivatives

In this paper 1,3-dipolar cycloaddition reaction has been studied. An efficient synthesis of 4′-[3-methyl-5-thioxo-1H-1,2,4-triazol-4(5H)-yl]-2′,5′-diphenyl-2′,4′-dihydro spiro(indolin-3,3′[1,2,4]triazol)-2-one derivatives using triethylamine in MeCN at room temperature is reported. The structures of the obtained compounds were confirmed by means of elemental analysis, MS and spectral (IR, ¹H, and ¹³C NMR) methods.     

Biocompatibility and hyperthermia cancer therapy of casein‐coated iron oxide nanoparticles in mice

Magnetic nanoparticles (MNPs) can be used as heat generation source in cancer hyperthermia therapy. While iron oxide nanoparticles (NPs) are the most popular choice for magnetic hyperthermia, adding a surface enhancement can improve its performance. Furthermore, for MNPs to be used in biomedical application their cytotoxicity needs to be evaluated. In this study biocompatibility and also in vivo performance of casein‐coated MNPs were assessed. Cell viability of normal cell lines in all of tests remained above 95% for 0.5 and 1 mg/mL concentration and even the minimum recorded cell viability for normal cell lines was 84.78% at 20 mg/mL concentration. In contrast cell viability of cancer cell lines in contact with casein coated MNPs core‐shell structure except for one sample remained below 85%. By introduction of and alternating magnetic field, cell viability of samples with lower MNP concentration dropped by 20% to 30% while this drop for samples with higher concentration was 10% to 20%. Furthermore, results of in vivo trials show that just 1 week of hyperthermia treatment with casein coated MNPs core‐shell structure can reduce the tumor size of the mice by 33%. Real‐time polymerase chain reaction results further confirmed the effectiveness of this method. Moreover, findings of this study suggest that lower injection speed can improve NPs distribution and treatment effect. Results of this study suggest that core‐shell structure can positively affect the tumor growth and the combination of good biocompatibility, innate hostility toward cancer cells and good heating power makes them a good candidate for hyperthermia cancer therapy applications.     

Design and synthesis of novel antimicrobial acyclic and heterocyclic dyes and their precursors for dyeing and/or textile finishing based on 2-N-acylamino-4,5,6,7-tetrahydro-benzo[b]thiophene systems

A series of novel polyfunctionalized acyclic and heterocyclic dye precursors and their respective azo (hydrazone) counterpart dyes and dye precursors based on conjugate enaminones and/or enaminonitrile moieties were synthesized. The dyes and their precursors are based on 2-cyano-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-acetamide, 2-ethoxycarbonyl-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-acetamide or 2-phenylcarbamoyl-N-(3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophen-2-yl)-acetamide systems as precursors. The latter compounds were used to synthesize polyfunctional thiophene-, thiazole-, pyrazole, pyridine-, pyrimidine-, oxazine-, as well as acyclic moieties. The dyes and dye precursors were characterized by elemental analysis and spectral methods. All dyes and their precursors were screened in vitro and evaluated for both their antibacterial and antifungal activities. MIC data of the novel dye systems and their respective precursors showed significant antimicrobial activity against most tested organisms. Some compounds exhibited comparable or even higher efficiency than selected standards. Dyes were applied at 5% depth for disperse dyeing of nylon, acetate and polyester fabrics. Their spectral characteristics and fastness properties were measured and evaluated.     

Stability and Rheological Properties of Model Low-Fat Salad Dressing Stabilized by Salep

A model low-fat salad dressing including salep as thickening agent was prepared. In order to obtain an stable salad dressing, different variables each one at three levels like salep content (0.5, 2.0, and 3.5% w/w), oil volume fraction (7.50, 16.25, and 25.00% w/w), pH (3, 5, and 7), salt concentration (0.3, 0.9, and 1.5% w/w), and egg yolk content (2, 4, and 6% w/w) were chosen and their effect on the creaming index of salad dressing was studied. It was observed that samples with highest salep content at pH 3 were the most stable during storage time (15 days). The microstructure of some samples was considered. Rheological measurements were performed for stable samples. Oil fraction and salt content increased zero shear viscosity and G′ modulus of samples.      

Pure and binary adsorption isotherms of ethylene and ethane on zeolite 5A

Pure and binary adsorption equilibrium data of ethylene and ethane on zeolite 5A were collected with a volumetric method for the temperature range 283 K to 323 K and pressure up to 950 kPa. The applicability of the binary adsorption prediction by the vacancy solution theory (VST) was investigated. Further individual adsorption and selectivity were obtained by VST prediction. According to the experimental results, zeolite 5A has a high adsorption capacity and selectivity for ethylene in the ethylene/ethane system. VST predicts that ethylene selectivity increases with pressure; it also shows that the amount of ethylene separated by zeolite 5A increases as the temperature decreases at a specified pressure.     

Synthesis of core–shell magnetic ion-imprinted polymer nanospheres for selective solid-phase extraction of Pb2+ from biological,food, and wastewater samples

Magnetic ion-imprinted polymer nanospheres, which have core–shell structures, have been synthesized as an adsorbent for extraction of Pb²⁺ from real samples prior to its flame atomic absorption spectrometric determination. The prepared adsorbent has been characterized using XRD, VSM, TEM, and FTIR measurements. The optimization results revealed that the adsorbent exhibited high selectivity toward Pb²⁺ over other cations such as Cu²⁺ and Zn²⁺. In addition, the removal efficiency of synthesized adsorbent was considerable (q_m?=?171.42?mg g^?1), its calibration curve was linear (0.5?850.0?ng mL^?1), and detection limit was 0.01?ng mL^?1. These results suggested that the prepared nanoadsorbent is an ideal candidate for solid-phase extraction of Pb²⁺ ions.     

A quantum mechanics/molecular mechanics (QM/MM) investigation on the mechanism of adsorptive removal of heavy metal ions by lignin: single and competitive ion adsorption

In this paper, an adsorption removal mechanism of heavy metal ions (Pb, Cu, Cd, Zn, and Ni) by lignin is investigated by molecular and quantum chemical modeling. First, the lowest energy sites of lignin for heavy metal ions were investigated using a Metropolis Monte Carlo search and simulated annealing. Then, equilibrium adsorption capacities of lignin for heavy metal ions were calculated with conductor-like screening models with a segmented activity coefficients, together with generalized gradient approximation and Volsko–Wilk–Nusair density functional functional theory. These calculations followed the local pseudo-thermodynamic equilibrium at the interface of lignin and ion-containing effluent. Several kinetic Monte Carlo simulations were performed to analyze the surface kinetics of ion adsorption. The affinity of lignin for metal ions follows the order: Pb > Cu > Cd > Zn > Ni which is in agreement with experimental observations. The stability of ions follows the order: Pb > Cd > Zn > Ni > Cu, indicating that the adsorption affinity does not demand the same order of stability on ions. In addition, it was found that while the adsorption of heavy metal ions on the lignin is accessible, the adsorbed heavy metal ions, however, are less stable than the adsorbed water molecules. As such, the used lignin must be replaced by fresh lignin in a cyclic manner. While lignin provides desirable adsorption performance for single ion removal, it failed in processing of practical heavy metal ion solutions expected in environmental issues.