Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

FLUORESCENCE OF 1-DIMETHYLAMINONAPHTHALENE-5-SULFONATE AND PYRENE-1-SULFONATE CONJUGATED TO BACTERIORHODOPSIN

Abstract— Two fluorescence probes, 1-dimethylaminonaphthalene-5-sulfonylchloride and pyrene-1-sulfonylchloride, were conjugated to the protein in purple membrane and fluorescence intensity and anisotropy were measured as a function of temperature. The anisotropy of the 1-dimethyl-aminonaphthalene-5-sulfonate conjugate showed a characteristic temperature dependence, in which, the anisotropy is constant at 0.22 ± 0.01 until 25-30°C and decreases above 30°C. The fluorescence intensity, however, varies linearly with temperature. These results imply that the transition is due to bacteriorhodopsin in the trimer.     

Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

Index Abstracts

Abstract

Calorimetric titrations have been performed in anhydrous acetonitrile at 25°C to give the complex stability constants (K _s) and the thermodynamic parameters (ΔGΔ, ΔHΔ and ΔSΔ) for the complexation of light lanthanoid(III) nitrates (La-Gd) with N-benzylaza-21-crown-7 3. Data analyses, assuming 1:1 stoichiometry, were successfully applied to all light lanthanoid-azacrown ether combinations employed. Using the present and previous data on 15- to 21- membered N-benzylazacrown ethers 1–3, the effect of ring size upon complexation behavior was discussed comparatively and globally from the thermodynamic point of view. The complexation behaviors are analyzed in terms of the size-fit concept, N-substituent coordination numbers, and lanthanoid's surface charge density. Thermodynamically the complexation of light lanthanoids with azacrown ethers is enthalpy-driven, while the cation selectivity is generally entropy-driven in acetonitrile.     

Electromagnetically induced transparency with squeezed vacuum

The squeezed vacuum resonant on the (87)Rb D1 line (probe light) was injected into an optically dense rubidium gas cell with a coherent light (control light). The output probe light maintained its quadrature squeezing within the transparency window caused by the electromagnetically induced transparency (EIT). The results reported here are the first realization of EIT in the full quantum regime.     

High-speed wavelength-division multiplexing quantum key distribution system

A high-speed quantum key distribution system was developed with the wavelength-division multiplexing (WDM) technique and dedicated key distillation hardware engines. Two interferometers for encoding and decoding are shared over eight wavelengths to reduce the system's size, cost, and control complexity. The key distillation engines can process a huge amount of data from the WDM channels by using a 1 Mbit block in real time. We demonstrated a three-channel WDM system that simultaneously uses avalanche photodiodes and superconducting single-photon detectors. We achieved 12 h continuous key generation with a secure key rate of 208 kilobits per second through a 45 km field fiber with 14.5 dB loss.     

Contribution of Na counterions to H-AOT&Na-AOT-based W/O microemulsion formation using aqueous NaOH solutions as estimated by pyranine absorbance

The objective of this study is to estimate the contribution of Na⁺ as a counterion in the formation of H-AOT&Na-AOT-based W/O microemulsions using aqueous NaOH solution by pyranine absorbance measurements. A mixture of an aqueous NaOH solution containing pyranine/H-AOT&Na-AOT/isooctane was emulsified by changing the mixing ratio of Na-AOT (X_Na-AOT = 0–1) and the mole fraction of NaOH (X_NaOH = [NaOH]/the AOT⁻ concentration in the water pool = 0–1). The phase behavior of the emulsified mixture was evaluated from the absorbance of pyranine at the isosbestic point and by visual observations. W/O microelumsions are formed at the mid-range of X_Na-AOT, whereas the emulsified mixture separates into two phases at lower X_Na-AOT and higher X_Na-AOT. The two phase boundaries shift toward lower X_Na-AOT as with increasing X_NaOH. The phase behavior depends on the degree of screening of electrostatic repulsions between the polar headgroups of AOT⁻ by the Na⁺ counterion. Interestingly, nano-sized W/O microemulsions are formed without phase separation using a highly concentrated NaOH aqueous solution when the Na-AOT mixing ratio is appropriately adjusted. The phase behavior was plotted as X_NaOH versus X_Na-AOT, and the correlation equations for the two phase boundaries were obtained by fitting the points. The contribution of the Na⁺ counterion from NaOH to W/O microemulsion formation was estimated by the correlation equations. The absorbance of pyranine and the size of W/O microemulsions, as measured by DLS, were plotted as a function of X_Na⁺=(x[Na⁺   from   NaOH]+[Na⁺   from   Na-AOT])/[AOT⁻], in which x is the ratio contributed by NaOH. The absorbance and size correlates well with X_Na⁺, indicating that X_Na⁺ is a meaningful parameter for quantitatively estimating phase behavior and size variation.