Gap Space Optimization for NO Removal in a Non‐thermal Plasma Discharge

Given the operational constraints of aerospace ground equipments (AGE), the nonthermal plasma discharge (NTPD) has been identified as a promising technology for their NO_x removal. As part of a program to optimize an NTPD system for this particular application, an investigation of the effect of discharge gap spacing on the electrical and chemical processes that occur in NTPDs was initiated. A number of experiments were performed to examine how the gap spacing affects the NO removal efficiency, discharge characteristics, and chemical reactions in a NTPD device. Gap spacings ranging from 0.8 to 4.0 mm were investigated in this study. An optimum gap spacing for NO removal was observed at approximately 2 mm and, based on the experimental data, a physical explanation for the optimum was developed. The experiments, results and conclusions are discusssed in detail in this paper.     

葡萄糖、果糖和蔗糖在甲酰胺溶液中的体积性质

报导了含葡萄糖、果糖和蔗糖的甲酰胺溶液的密度数据，无限稀释表观摩尔体积和体积第二维里系数．利用改进的定标粒子理论、基团几何模型和基团加合方法，求解了溶质的空腔生成体积，溶质-溶剂间的氢键作用对体积性质的影响，并和水溶液中的情况进行了比较．     

稀土-二甲酚橙络合物的胶束液相色谱分离与测定

本文应用一种新的高效液相色谱-胶束液相色谱法,在Shim-Pack CLC-ODS(150mm×6.0mm)色谱柱上,用含1.6×10~(-2)mol/L的CTMAB和pH=7.40的三-(羟甲基)-氨基甲烷缓冲液的甲醇/水(5:95)作流动相,对15种稀土元素-二甲盼橙络合物进行分离,取得了较满意的结果。     

四磷酸钾铽能谱的晶场分析

采用不可约张量法,分析了KTbP₄O₁₂晶体荧光光谱,拟合了五个晶场参量和八个相对论参量,结果与实验吻合。     

Quantum chemical study on the abstraction reaction of alkylidenegermylene with oxirane and thiirane

The mechanisms of theion reaction of alkylidenegermylene with oxirane and thiirane have been characterized detail in using density functional theory, as well as ab initio method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies were calculated by CCSD(T)/6-311G(d)//B3LYP/6-311G(d,p) method for the involved conformations. The results show that the reaction pathways for both reactions consist of two ways: (1) the reactants can yield bent products (P1; P4) by syn-isomers; (2) the reactants can also yield three-membered products (P2; P5) by anti-isomers, which then further react with oxirane and thiirane to form the ultimate products (P3-1, P3-2; P6). Furthermore, a comparison with alkylidenecarbene, oxirane, and thiirane was done.     

Role of Bipolar Pulsed DBD on the Growth of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> in Three-Phase Discharge Plasma Reactor

Algae in drinking water supplies often bring about impact on the water treatment. In this study, a bipolar pulsed dielectric barrier discharge system in three-phase discharge plasma reactor was constructed for investigating its ability to control excessive growth of cyanobacteria, Microcystis aeruginosa. Experimental results show there was almost no change in optical density immediately after the interruption of electrical discharge, but the decreasing trend of optical density, cell density and chlorophyll-a content was obvious during the incubation period, indicating a significant residual effect of electrical discharge process on the algal growth inhibition. Scanning electron microscopy investigation of algae revealed surface damage, apparent leakage of intracellular contents and pores formed after electrical discharge process, which showed that algal cells had no potential to survive and grow. Compared with the control sample, it was observed that electrical discharge on the algal extracellular products has almost no residual effect and the growth rate of algae slightly decreased before three days storage. Hydrogen peroxide was produced by electrical discharge in the μM level and showed a first-order decay. But at such level, the external addition of hydrogen peroxide alone is not likely to cause the residual effect. These results implicated that the growth inhibition of M. aeruginosa was mainly caused by electrical discharge process, and it made the algal cells lose ability to survive, demonstrating the considerable potential of such an alternative process for efficient water purification.     

Identification of target organs of copper nanoparticles with ICP-MS technique

Nanosized copper particles are widely used in fields of lubricants, polymers/plastic, metallic coating and ink. Recently, we found that copper particles in different sizes can lead to different toxicological effects. To clarify the target organs of copper particles of different sizes, the inductively coupled plasma mass spectroscopy (ICP-MS) was employed to evaluate the distribution of copper in different organs of mice after a single dose oral exposure. The results suggest that the main target organs for copper nanoparticles are kidney, liver and blood. Liver is the main damaged organ.     

Production of Raw Starch-Saccharifying Thermostable and Neutral Glucoamylase by the Thermophilic Mold <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> in Submerged Fermentation

Among physical and nutritional parameters optimized by “one variable at a time” approach, four cultural variables (sucrose, MgSO₄ ^.7H₂O, inoculum size, and incubation period) significantly affected glucoamylase production. These variables were, therefore, selected for optimization using response surface methodology. The p-values of the coefficients for linear effect of sucrose and inoculum size were less than 0.0001, suggesting them to be the key experimental variables in glucoamylase production. The enzyme production (34 U/ml) attained under optimized conditions (sucrose, 2%; MgSO₄ ^.7H₂O, 0.13%; yeast extract, 0.1%; inoculum size, 5 × 10⁶ spores per 50 ml production medium; incubation time, 48 h; temperature, 40°C; and pH 7.0) was comparable with the value predicted by polynomial model (34.2 U/ml). An over all 3.1-fold higher enzyme titers were attained due to response surface optimization. The experimental model was validated by carrying out glucoamylase production in shake flasks of increasing capacity (0.25–2.0 l) and 22-l laboratory bioreactors (stirred tank and airlift), where the enzyme production was sustainable. Furthermore, the fermentation time was reduced from 48 h in shake flasks to 32 h in bioreactors.     

Freeze-drying for the stabilisation of shellfish toxins in mussel tissue (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) reference materials

Two samples of mussels (Mytilus edulis) were collected from the southwest of Ireland. One sample contained domoic acid, the other sample contained okadaic acid, dinophysistoxin-2 and azaspiracid-1, -2 and -3. Wet and freeze-dried reference materials were prepared from each of the two samples to test for differences in homogeneity, stability and extractability of the analytes in either condition. Wet materials were homogenised, aliquoted and hermetically sealed under argon and subsequently frozen at −80 °C. Dry materials were similarly homogenised but frozen in flat cakes prior to freeze-drying. After grinding, sieving and further homogenisation, the resulting powder was aliquoted and hermetically sealed. Domoic acid materials were characterised using HPLC–UV, while LC–MS was used for the determination of lipophilic toxins. The extractabilities of all phycotoxins studied were comparable for wet and freeze-dried materials once a sonication step had been carried out for reconstitution of the freeze-dried materials prior to extraction. Homogeneity was assessed through replicate analysis of the phycotoxins (n = 10), and was found to be similar for wet and freeze-dried materials, for both hydrophilic and lipophilic toxins. Water contents were determined for both wet and freeze-dried materials, and particle size was determined for the freeze-dried materials. Stability was evaluated isochronously over eight months at four temperatures (−20, +4, +20 and +40 °C). The freeze-dried material containing domoic acid was stable over the whole duration at all temperatures, while in the wet material domoic acid degraded to some extent at all temperatures except −20 °C. In freeze-dried and wet materials containing lipophilic toxins, okadaic acid, dinophysistoxin-2, azaspiracid-1 and azaspiracid-2 were stable over the whole duration at all conditions, while concentrations of azaspiracid-3 changed significantly in both materials at some storage temperatures. Figure Aliquots of freeze-dried and wet mussel tissue reference materials containing the various shellfish toxins examined in the study     

Study on the cationic modification and dyeing of ramie fiber

A modification procedure for ramie fiber using 3-chloro-2-hydroxypropyltrimethyl ammonium chloride (CHPTAC) as a cationic agent and NaOH as a catalyst was developed in this paper. The morphological and structural transformations of the fiber induced by modification were determined by XRD (XRD), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA). XRD results show that the crystal structure of the modified fiber was still preserved although its crystallinity was decreased, which was confirmed from the TGA results. The mechanisms for the modification and dyeing of ramie fiber were analyzed, and the optimum modification conditions were determined to be the CHPTAC concentration of 30 g L⁻¹, the NaOH concentration of 15 g L⁻¹, the reaction temperature of 50 °C, and the reaction time of 60 min. The raw and the modified fibers were dyed with C.I. reactive red 2. The K/S values for the cationic modified fiber increased to be three times as high as the unmodified fiber. The dye uptakes increased greatly with an increase in the nitrogen contents up to 0.4% on the modified fibers.