Sun Exposure over a Lifetime in Australian Adults from Latitudinally Diverse Regions

Spatio‐temporal patterns in sun exposure underlie variations in skin cancer incidence and vitamin D deficiency, indicate effectiveness of sun protection programs and provide insights into future health risks. From 558 adults across four regions of Australia (Brisbane (27°S), Newcastle (33°S), Geelong and the Western Districts of Victoria (37°S) and Tasmania (43°S)), we collected: self‐report data on time‐in‐the‐sun from age 6 years; natural skin color and ethnicity; silicone skin casts (for cumulative skin damage); and serum for vitamin D status. Ambient ultraviolet radiation (UVR) at the location of residence, with time‐in‐the‐sun, was used to calculate a “UVR dose” for each year of life. Individuals maintained their ranking compared to their peers for time‐in‐the‐sun in summer compared to winter and across ages (Spearman rho 0.24–0.84, all P < 0.001). Time‐in‐the‐sun decreased with age in all birth cohorts, and over calendar time. Summer time‐in‐the‐sun increased with increasing latitude (P < 0.001). Seasonal variation in vitamin D status had greater amplitude and vitamin D deficiency increased with increasing latitude. Temporal patterns are consistent with effectiveness of sun protection programs. Higher relative time‐in‐the‐sun persists from childhood through adulthood. Lower summer time‐in‐the‐sun in the warmest location may have implications for predictions of UVR‐related health risks of climate change.     

Effect of Metal Ions in Organic Synthesis. part XVI. Knoevenagel Condensations of Aldehydes and Tosylhydrazones with 2,4-Pentanedione by Copper (II) Chloride-Catalyzed Reaction

Based on some of our previous findings on the activity of some metal ions in certain organic reactivities,¹ we have now studied the Knoevenagel condensations of aliphatic and aromatic aldehydes or their tosylhydrazone derivatives with 2,4-pentanedione. In the presence of catalytic amounts of anhydrous copper (II) chloride, these compounds react in tetrahydrofuran at room temperature, affording the corresponding alkylidene or arylidene compounds in 48–98% yields.     

Synthesis of Tri- and Disalicylaldehydes and Their Chiral Schiff Base Compounds

A suitable procedure for convenient preparation of 1,3,5-tris(4-hydroxy-5-formylphenyl)benzene (6) was exploited via 5-bromosalicylaldehyde as starting reactant. Among the obtained products, compound 6, 4-methoxy-3-formylphenylboronic acid (9), 1,3,5-tris(4-methoxy-5-formylphenyl)benzene (10), and 4-methoxy-4′-hydroxyl-3,3′-diformyl-1,1′-diphenyl (11) had not been reported previously. Two new chiral Schiff base ligands, L1 and L2, were obtained from the tri- or disalicylaldehydes.     

Improvement in Uranium Adsorption Properties of Amidoxime-Based Adsorbent Through Cografting of Amine Group

Amidoxime (AO)/amine co-functionalized polypropylene fiber adsorbents were prepared. The all-polymeric structures were characterized by using Fourier transform infrared spectroscopy (FTIR), optical microscope, contact angle meter and electron spin resonance (ESR) analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. The properties for the removal of uranyl(VI) from aqueous solutions were investigated. For amidoxime (AO) fiber, high adsorption rate was observed within the first 30 minutes and the plateau value of 40.6% uranium loading (0.0812 mg/g) was reached at around 30 minutes. The adsorption equilibrium for AO/amine fiber was attained within 20 minutes, resulting in the adsorption of 92.6% uranium loading (0.185 mg/g). The percentage of adsorption increases with increasing pH value (2–6), reaches a maximum at pH 6.0 and then remains almost constant for AO/amine fiber, whereas reduces slightly for AO fiber.     

Sedimentation rate in the Sungai Linggi estuary using excess 210Pb and 137Cs

The purpose of this study was to estimate the sedimentation rate in the Sungai Linggi estuary using the constant initial concentration of unsupported or excess ²¹⁰Pb model and verified with ¹³⁷Cs method. Five sediment cores were collected on 25 January 2011 using gravity corer with the inner tube of 50 cm length and 7.5 cm diameter. The total ²¹⁰Pb activities in the sediment cores profile at all sampling stations were varied and upper than those obtained for supported ²¹⁰Pb i.e. ²²⁶Ra, indicated disequilibrium among ²¹⁰Pb and its grandparents in the ²³⁸U decay series. Meanwhile, the lower ¹³⁷Cs activities were observed at all sampling stations due to no significant sources of ¹³⁷Cs releases were transferred into Malaysian marine. The estimation of sedimentation rate indicated the agreement of ²¹⁰Pb and ¹³⁷Cs method with a general presence of deep mixing in the Sungai Linggi estuary. Therefore, the apparent sedimentation rates calculated from ²¹⁰Pb profiles generally reflect the true value with the range from 0.70 to 1.97 cmyr^?1. High sedimentation rate was observed at some sampling stations which are located in river channel, estuary and closer to mainland. This suggested that land-use development, agriculture activities, channelization etc. introduced a large amount of sediment loaded into those areas.     

Plutonium-239 sorption and transport on/in unsaturated sediments: comparison of batch and column experiments for determining sorption coefficients

Sorption (distribution) coefficients of plutonium were most often derived by static batch experiments. However, it is not clear how unsaturated flow conditions including moisture content and pore water velocity change the sorption coefficients. Transport experiments of plutonium through the unsaturated sediments packed into the columns were then performed in order to determine the sorption coefficients (column-K _ds). Static batch experiments were also conducted to obtain batch-K _ds and then compare the differences between batch-K _ds and column-K _ds. The results show that unsaturated flow conditions had no significant effect on column-K _ds, and the average column-K _d value was 1.74 ± 0.02 m³/kg. By comparison, batch-K _d values spanned several orders of magnitude, regardless of the specified liquid–solid conditions. Moreover, the batch-K _d (22.7 m³/kg) at the standard L/S (4 mL/g) recommended by ASTM D 4319 was over an order of magnitude larger than the average column-K _d.     

在线质谱仪检测植物排放的挥发性有机物

利用在线检测质谱仪(SPIMS-1000)分别对高温烘烤、长时间密封保存、机械损伤等处理过的松科松属马尾松(Pinus Massoniana L.)样品排放的挥发性有机物(VOCs)与新鲜样品进行对比检测。SPIMS-1000在线检测质谱仪能够检测出植物排放的异戊二烯(m/z 68)和单萜(m/z 136),及其它一些特异性组分,如(Z)-3-己烯醛(m/z 98)等。利用在线检测质谱仪实现敞开环境中原位植物排放气体的检测。实验表明,在线检测质谱仪被广泛应用于环境中VOCs的实时、在线、定性快速检测。     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.