Multiple functions of microfluidic platforms: Characterization and applications in tissue engineering and diagnosis of cancer

Microfluidic system, or lab-on-a-chip, has grown explosively. This system has been used in research for the first time and then entered in the clinical section. Due to economic reasons, this technique has been used for screening of laboratory and clinical indices. The microfluidic system solves some difficulties accompanied by clinical and biological applications. In this review, the interpretation and analysis of some recent developments in microfluidic systems in biomedical applications with more emphasis on tissue engineering and cancer will be discussed. Moreover, we try to discuss the features and functions of microfluidic systems.     

Rapid and green synthesis of 4H-benzo[b]pyrans using triethanolamine as an efficient homogeneous catalyst under ambient conditions

Research on Chemical Intermediates - 4H-benzo[b]pyrans were obtained rapidly in high yields using triethanolamine as an efficient, eco-friendly and low-cost basic catalyst. One-pot three-component...     

Experimental design for estimation of the distribution of the convective heat transfer coefficient for a bubbly impinging jet

Journal of Thermal Analysis and Calorimetry - In this study, a two-dimensional inverse algorithm is developed to determine the heat transfer coefficient distribution of a two-phase air–water...     

Hybrid thermal management of lithium-ion batteries using nanofluid,metal foam,and phase change material: an integrated numerical–experimental approach

Safety issues of Li-ion batteries imposed by unfavorable thermal behavior accentuate the need for efficient thermal management systems to prevent the runaway conditions. To that end, a hybrid thermal management system is designed and further investigated numerically and experimentally in the present study. The passive cooling system is fabricated by saturating copper foam with paraffin as the phase change material (PCM) and integrated with an active cooling system with alumina nanofluid as the coolant fluid. Results for various Reynolds numbers and different heating powers indicate that the hybrid nanofluid cooling system can successfully fulfill safe operation of the battery during stressful operating conditions. The maximum time in which all PCM field is changed to the liquid phase is defined as the onset of the stressful conditions. Therefore, the start time of stressful conditions at 41 W and Re 420 is increased from 3700 s with nanofluid composed of 1% volume fraction nanoparticles (VF-1%) to 4600 s with nanofluid VF-2% during high current discharge rates. Nanofluid cooling extends the operating time of the battery in comparison with the water-based cooling system with 200-s (nanofluid with volume fraction of 1%) and 900-s (nanofluid with volume fraction of 2%) increases in operating time at Reynolds of 420. Using nanofluid, instead of water, postpones the onset of paraffin phase transition effectively and prolongs its melting time which consequently leads to a decrease in the rate of temperature rise.

     

Robust fixed-time attitude stabilization control of flexible spacecraft with actuator uncertainty

Nonlinear Dynamics - A robust fixed-time control framework is presented to stabilize flexible spacecraft’s attitude system with external disturbance, uncertain parameters of inertia, and...     

Application of capillary electrophoresis/ electrospray ionization-mass spectrometry to subcellular proteomics of Escherichia coli ribosomal proteins

We introduce capillary electrophoresis-mass spectrometry (CE-MS) as an efficient means for the on-line separation and identification of protein mixtures. It was found that while CE/electrospray ionization (ESI)-MS analysis of whole-cell lysate was too complicated for the one-dimensional CE-MS analysis, the technique was useful for the analysis of protein mixtures of moderate complexity (approximately 50 intact proteins). CE/ESI-MS was applied to the subcellular proteomics of ribosomal Escherichia coli. 55 out of the 56 ribosomal proteins were detected with ease by using only approximately 3.4 ng of ribosomal proteins. In addition, it was found that the mass accuracy of the conventional MS (such as quadrupole ion traps) was good enough to identify many post-translational modifications of the intact proteins by simply comparing their measured average molecular weight with the average molecular weight predicted from gene banks.     

Insertion of tin(II) bromide into Pt–X (X = Cl,Br) bond of dimethylplatinum(IV) complexes: A novel polymorphic form of [PtBr2(bpy)]

The platinum(II) complex [PtMe₂(bpy)] (bpy = 2,2′-bipyridine) reacted with a large excess of dihaloalkanes X(CH₂)_nX (n = 1, X = Cl; n = 4, X = Br) to form the platinum(IV) complexes [PtMe₂X{(CH₂)_nX}(bpy)] (n = 1, X = Cl, 1a; n = 4, X = Br, 1b). The reaction of complexes 1a and 1b with SnBr₂ resulted in insertion of SnBr₂ into Pt–X (X = Cl, Br) bond to afford the trihalostannyl complexes [PtMe₂(SnBr₂X){(CH₂)_nX}(bpy)] (n = 1, X = Cl, 2a; n = 4, X = Br, 2b). The synthesis of such trihalostannylplatinum(IV) complexes is reported for the first time. The complex 2a was decomposed in CH₂Cl₂ solution and single crystals of [PtBr₂(bpy)] (3a) were obtained. The X-ray structure determination of 3a revealed a new polymorphic form of [PtBr₂(bpy)]. The molecules undergo a remarkable stacking along the b-axis to form a zigzag Pt?Pt?Pt chain containing both short (3.799 Å) and long (5.175 Å) Pt?Pt separations through the crystal. The crystal structure is compared to that of the yellow modification of [PtBr₂(bpy)].     

Highly efficient, one-pot, solvent-free synthesis of 2,4,6-triarylpyridines using a Br?nsted-acidic ionic liquid as reusable catalyst

Abstract  

A simple, efficient, and green method for synthesis of 2,4,6-triarylpyridines by one-pot three-component reaction of acetophenones, aryl aldehydes, and ammonium acetate using 3-methyl-1-(4-sulfonylbutyl)imidazolium hydrogen sulfate [HO₃S(CH₂)₄MIM][HSO₄], a Br?nsted-acidic ionic liquid, as an effective and reusable catalyst under solvent-free conditions is described. This method has several advantages, for example simple procedure with an easy work-up, shorter reaction times, and high yields.     

Gas storage of simple molecules in boron oxide nanocapsules

The capability of the B₂₀O₃₀ nanocapsule to store H₂, N₂, CO, CO₂, NH₃, CH₄, and Cl₂ molecules on the outer surface and inside of the cage was investigated using Monte Carlo simulations, long‐range and dispersion corrected density functional theory, and Møller–Plesset second‐order perturbation theory. Also, Monte Carlo simulations were employed to investigate the adsorption behavior of larger number of guest molecules inserted into and onto the larger B₈₀O₁₂₀ and B₂₀O₃₀@B₈₀O₁₂₀ cages. Absolute localized molecular orbitals energy decomposition analysis was used to describe the nature of intermolecular interactions in these endohedral and exohedral complexes. It is found that the hydrogen and ammonia gases are diffused to the inside of spherical B₂₀O₃₀ capsule, while other guest molecules prefer to interact with the outer surface of spherical and pyramidal capsules. For B₈₀O₁₂₀, up to 26 H₂ and 11–14 N₂, CO, CO₂, NH₃, and CH₄ molecules are stored inside the capsule. The residual molecules are adsorbed on the outer surface of nanocapsule. © 2013 Wiley Periodicals, Inc.     

Synthesis and characterization of new fluorinated photoactive polyamides based on xanthene pendant: Evaluation of antibacterial and heavy metal ions removal behavior

A series of novel organosoluble polyamides (PAs) bearing different functional groups such as flexible ether, substituted imidazole, and xanthene rings and electron-withdrawing CF₃ groups were synthesized from diamines and various dicarboxylic acids. The structures of diamines and PAs were fully characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T₁₀%) in the range of 184–277°C and 410–480°C in N₂ atmosphere, respectively. These polymers showed fluorescence emission upon irradiation with UV light. Diamine compounds and two of synthesized polymers were also screened for antibacterial activity against gram-positive and gram-negative bacteria, and the obtained results for all four combinations showed good inhibition. Extraction capability for heavy metal ions such as Cr³⁺, Pb²⁺, Hg²⁺, Cd²⁺, and Co²⁺ from aqueous solutions was also tested at 25°C and pH 7–8.