Correlation of CO2 solubility in N-methyldiethanolamine + piperazine aqueous solutions using extended Debye–Hückel model

Solubility data of CO₂ in aqueous N-methyldiethanolamine (MDEA) solutions of concentration (2.52, 3.36, and 4.28) kmol/m³ were obtained at temperatures (313, 323, and 343) K and partial pressures ranging from about (30 to 5000) kPa. A thermodynamic model based on extended Debye–Hückel theory was applied to predict and correlate of CO₂ solubility in various aqueous amine solutions. The effect of piperazine (PZ) concentration on CO₂ loading in MDEA solutions was determined at PZ concentration (0.36, 0.86, and 1.36) kmol/m³. Using experimental data in various temperatures the interaction parameters of activity coefficient model for these systems were determined. The results show the model consistency with experimental and literature data and PZ is beneficial to the CO₂ loading. The comparison of results of this study with previous data work shows the wide range of CO₂ loading considered in this work and the better agreement of model with experimental data. The average absolute relative deviation percent (δ_AAD) for all data points were 8.11%.     

HALOMETHYLATION OF POLYSTYRENE AND SUBSEQUENT PYRIDINATION VIA A HOMOLYTIC PATHWAY

Chloromethylation of polystyrene （PS） with two different chloromethylating systems methylal/thionyl chloride and paraformaldehyde/trimethylchlorosilane was studied. Soluble chloromethylated polystyrene with a degree of substitution of 89% was obtained. The Conant-Finkelstein reaction on the chloromethylated PS afforded soluble iodomethylated polystyrene with a degree of substitution as high as 96%. The reaction conditions of Minisci were employed to radically pyridinate PS via its iodomethylated derivative. Polyelectrolytes were formed which could be converted to normal polymers by treatment with a 20% aqueous solution of NaOH.     

Limitations and Applicability of the Interfacial Shear Rheology in the Study of Monolayer Films at the Air-Water Interface

This article studies the applicability of a new technique in determining the interfacial shear rheology properties of surface active compounds relevant to the petroleum industry. It presents the theory behind the determination of the rheological parameters and the results of tests performed on a set of petroleum related compounds (asphaltenes, tetra-acid model compound, fatty acid, and surfactant). It is concluded that this technique is not mature enough to determine the properties of the studied compounds.     

New Facile Route to Synthesize Furo[3,2-e][1,2,4]triazolo[4,3-c]pyrimidine and Furo[3,2-e][1,2,4]triazolo[1,5-c]pyrimidine Derivatives

A new facile route for synthesis of 3-(aryl)-8,9-diphenylfuro[3,2-e][1,2,4]triazolo pyrimidines derivative from the same starting material, 2-amino-4,5-diphenylfuran-3-carbonitrile, has been developed through heterocyclization of the corresponding arylidene-hydrazono-5,6-diphenylfuro[2,3-d]pyrimidine and N-(arylmethylene)-4-imino-5,6-diphenylfuro[2,3-d]pyrimidin-3(4H)-amine under refluxing condition with acetic anhydride followed by air oxidation. The products were obtained in good yield with an easy workup along with the purification of products by a nonchromatographic method. This general synthetic procedure can be extended to the preparation of a wide range of isomeric triazoles using 2-amino 3-carbonitrile bifunctional derivatives.     

Micro‐arc oxidation and electrophoretic deposition of nano‐grain merwinite (Ca3MgSi2O8) surface coating on magnesium alloy as biodegradable metallic implant

Magnesium alloys are promising biomaterials as biodegradable implant for orthopedic applications. However, their low corrosion resistance and poor bioactivity have prohibited their implant applications. In order to enhance these two properties, a nano‐grain merwinite coating was prepared on magnesium alloy. Its corrosion and the bioactivity behavior were characterized with electrochemical and immersion tests. The results showed that the nano‐grain merwinite coating can improve both the corrosion resistance and the bioactivity of the magnesium alloy making it an appropriate material for biodegradable bone implants. Copyright © 2014 John Wiley & Sons, Ltd.     

One‐Pot stereoselective synthesis of trans‐4,5‐dialkoxy‐1,3‐bis (2‐pyrimidinyl)imidazolidines through a three‐component reaction

Stoichiometric reaction of 2‐aminopyrimidine with formaldehyde in the presence of formic acid catalyst in water gave N,N′‐bis(2‐pyrimidinyl)methanediamine ( 5 ). Subsequent cyclocondensation of 5 with glyoxal in alcohol (MeOH, EtOH, PrOH and i‐PrOH) under reflux conditions led to the formation of the corresponding 4,5‐dialkoxy‐1,3‐bis(2‐pyrimidinyl)imidazolidines ( 6a‐d ). 4,5‐Dihydroxy‐1,3‐bis(2‐pyrimidinyl) imidazolidine ( 6e ) was obtained when the reaction was carried out in acetonitrile. Based on ¹H NMR analysis, it was found that the trans‐dialkoxyimidazolidines ( 6 ) were selectively obtained in these cyclocondensation reactions.     

Three‐Component Reaction of an Isocyanide and a Dialkyl Acetylenedicarboxylate with a Phenacyl Halide in the Presence of Water: An Efficient Method for the One‐Pot Synthesis of γ‐Iminolactone Derivatives

The zwitterion, formed from the reaction of an alkyl isocyanide and a dialkyl acetylenedicarboxylate, reacts with phenacyl halides in H₂O to produce γ‐iminolactone derivatives in high yields. H₂O helps to avoid the use of highly toxic and environmentally unfavorable solvents for this conversion.     

Mixed Organometallic–Organic Hybrid Assemblies Based on the Diarsene Complex [Cp2Mo2(CO)4(μ,η2-As2)], AgI Salts and N-Donor Organic Molecules

The reaction of the organometallic diarsene complex [Cp₂Mo₂(CO)₄(η²-As₂)] ( 1 ) with Ag[Al{OC(CF₃)₃}₄] (Ag[TEF]) yielded the Ag^I monomer [Ag(η²- 1 )₃][TEF] ( 2 ). This compound exhibits dynamic behavior in solution, which allows directed selective synthesis of unprecedented organometallic–organic hybrid assemblies upon its reaction with N-donor organic molecules by a stepwise pathway, which is supported by DFT calculations. Accordingly, the reaction of 2 with 2,2′-bipyrimidine ( L1 ) yielded the dicationic molecular compound [{(η²- 1 )₂Ag}₂(μ- L1 )][TEF]₂ ( 3 ) or the 1D polymer [{(η²- 1 )Ag}(μ- L1 )]_n[TEF]_n ( 4 ) depending on the ratio of the reactants. However, its reactions with the pyridine-based linkers 4,4′-bipyridine ( L2 ), 1,2-bis(4-pyridyl)ethylene ( L3 ) and 1,2-bis(4-pyridyl)ethyne ( L4 ) allowed the formation of the 2D polymers [{(η²- 1 )Ag}₂(μ- Lx )₃]_n[TEF]_2n [ Lx=L2 ( 5 ), L3 ( 6 ), L4 ( 7 ), respectively]. Additionally, this concept was extended to step-by-step one-pot reactions of 1 , [Ag(CH₃CN)₃][Al{OC(CF₃)₂(CCl₃)}₄] ([Ag(CH₃CN)₃][TEF^Cl]) and linkers L2 – L4 to produce the 2D polymers [{(η²- 1 )Ag}₂(μ, Lx )₃]_n[TEF^Cl]_2n [ Lx = L2 ( 8 ), L3 ( 9 ), L4 ( 10 ), respectively].     

Tragacanth gum‐based pH‐responsive magnetic hydrogels for “smart” chemo/hyperthermia therapy of solid tumors

The drug delivery performances of pH‐responsive magnetic hydrogels (MHs) composed of tragacanth gum (TG), poly(acrylic acid) (PAA), and Fe₃O₄ nanoparticles (NPs) were investigated in terms of physicochemical as well as biological features. The fabricated drug delivery systems (DDSs) were analyzed using Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer, scanning electron microscopy, and transmission electron microscopy. The synthesized MHs were loaded with doxorubicin hydrochloride (Dox) as a universal model anti‐cancer drug. The MHs showed excellent Dox loading and encapsulation efficiencies, mainly due to strong hydrogen bonding and electrostatic interaction between the drug and polymeric matrix, as well as porous micro‐structures of the fabricated MHs. The drug‐loaded MHs showed negligible drug release values in physiological condition. In contrast, in cancerous condition (pH 5.0), both MHs exhibited highest drug release values that qualified them as “smart” DDSs. The cytocompatibilities of the MHs as well as the cytotoxicity of the Dox‐loaded MHs were investigated against human epidermoid‐like carcinoma (Hela) cells through MTT assay. In addition, hyperthermia therapy induced by Fe₃O₄ NPs was applied to locally raise temperature inside the Hela cells at 45 ± 3°C to promote cell death. As a result, the Dox‐loaded MHs can be considered as potential DDSs for chemo/hyperthermia therapy of solid tumors.