Synthesis and characterization of norverapamil and quantification of verapamil and nor-verapamil in plasma

Verapamil is a calcium channel blocking agent which has found widespread use in the management of supraventricular tachyarrhythmias, angina pectoris, hypertrophic cardiomyopathy and hypertension. It is converted to its biologically active metabolite nor-verapamil in liver by cytochrome P450. In present communication, synthesis and characterization of nor-verapamil and development of reverse phase high performance liquid chromatographic method for the quantification of nor-verapamil along with verapamil in plasma has been carried out. The characterization of nor-verapamil was carried out using GC-MS, FT-IR and NMR spectroscopy. The separation was carried out with an isocratic JASCO RP-HPLC system using 5 μm KYA TECH HiQ Sil C₁₈ HS column (250 mm × 4.6 mm internal diameter) as a stationary phase and methanol: water: 0.01 M orthophosphoric acid: triethylamine [70: 30: 2: 0.5, v/v/v/v] as mobile phase. The flow rate was maintained at 1.0 mL/min and UV detection at 222 nm. The calibration for verapamil and nor-verapamil were found to be linear over concentration range of 50–300 ng/mL with correlation coefficient (n = 6) of 0.9995 and 0.9997, respectively. This method was validated according to USFDA guidelines. The method was found to be simple, accuare, precise sensitive and selective for the determination of verapamil and nor-verapamil in plasma and thus useful in bioequivalence studies of verapamil.     

Peristaltic activity in blood flow of Casson nanoliquid with irreversibility aspects in vertical non-uniform channel

Due to the illuminating function of nanoliquids in several technological and medicinal domains, particularly in liquid transport processes known as peristalsis, inquisitive researchers have investigated the flow of peristaltic nanofluids. Consequently, the current study investigates the entropy production and magnetic influence on the peristaltic transport of heat and mass transport of Casson nanofluid in a non-uniform channel under convective circumstances. Utilizing the perturbation approach, fields of concentration, temperature, and velocity are derived from non-linear coupled partial differential equations (PDE). Entropy generation studies have been done. In addition, the influence of associated factors via specific physical terms, including the Sherwood number, the skin-friction coefficient, and the Nusselt number, for both Casson and Newtonian liquids, as well as the trapping phenomena, is visually examined.     

The non‐reflective interface: an innovative forcing technique for computational acoustic hybrid methods

The present article concerns a commonly used methodology for the numerical simulation of acoustic emission and propagation phenomena. We consider the so‐called multi‐stage hybrid acoustic approach, in which a given noise problem is simulated via a sequence of weakly coupled computations of noise generation and acoustic propagation stages, wherein the simulation of the propagation stage is based on advanced Computational AeroAcoustics (CAA) techniques. The paper introduces an original forcing technique, namely, the Non‐Reflective Interface (NRI), to enable the transfer of an acoustic signal from an a priori noise generation stage into a CAA‐based acoustic propagation phase. Unlike most existing forcing techniques, the NRI is non‐reflective (or anechoic) in nature and, therefore, can properly handle the backscattering effects arising during the noise propagation stage. This attribute makes the NRI‐based weak‐coupling procedure and the associated CAA‐based hybrid approach compatible with a larger variety of realistic noise problems (such as those involving installed configurations in wind tunnel experiments, for instance). The NRI technique is first validated via several test cases of increasing complexity and is then applied to two aerodynamic noise problems. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.     

Development of polyelectrolyte complexes of chitosan and phosphotungstic acid as pervaporation membranes for dehydration of isopropanol

Using a solution technique, chitosan-based polyelectrolyte complexes (PECs) were developed as pervaporation membranes by incorporating phosphotungstic acid (PTA). The resulting membranes were characterized by Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Membranes were tested for their ability to separate water–isopropanol mixtures by pervaporation in the temperature range of 30–50 °C. The experimental results demonstrated that both flux and selectivity were increased simultaneously with increasing PTA content in the membrane. The permeation flux of pure chitosan membrane was increased dramatically from 4.13 to 11.70 × 10⁻² kg/m² h and correspondingly its separation factor was increased from 4490 to 11,241 and then decreased to 7490 at 30 °C for 10 mass% of water in the feed. The total flux and flux of water were found to be almost overlapping particularly for PECs membranes, suggesting that these could be used effectively to break the azeotropic point of water–isopropanol mixtures. From the temperature dependency of diffusion and permeation values, the Arrhenius activation parameters were estimated and discussed in the context of membranes efficiency. The pure chitosan and a small amount of PTA-incorporated PECs membranes exhibited positive heat of sorption while other PECs membranes exhibited negative heat of sorption, giving exothermic contribution.     

Synthesis,antimicrobial, and antioxidant activities of new pyridyl‐ and thiazolyl‐bearing carbohydrazides

A series of novel substituted (E)‐N′‐benzylidene‐4‐methyl‐2‐(2‐propylpyridin‐4‐yl)thiazole‐5‐carbohydrazide derivatives ( 6a‐l ) have been synthesized by following the multistep synthetic route starting from prothionamide. The resulting compounds were characterized via ¹H, ¹³C NMR, and HRMS spectral data. The synthesized carbohydrazides were evaluated for their in vitro antimicrobial and antioxidant activities. Tested molecules have displayed moderate to good growth inhibition activity. Among the screened compounds, 6b , 6e , 6j, and 6k are found to be the more promising antimicrobial agents. A 2,2‐diphenyl‐1‐picrylhydrazyl assay was used to test the antioxidant activity of the carbohydrazides. The carbohydrazide derivatives 6b and 6i have shown better free‐radical scavenging ability than the other investigated compounds.     

Roughness-induced generation of crossflow vortices in three-dimensional boundary layers

The receptivity theory of Goldstein and Ruban is extended within the nonasymptotic (quasi-parallel) framework of Zavol'skii et al. to predict the roughness-induced generation of stationary and nonstationary instability waves in three-dimensional, incompressible boundary layers. The influence of acoustic-wave orientation, as well as that of different types of roughness geometries, including isolated roughness elements, periodic arrays, and two-dimensional lattices of compact roughness shapes, as well as random, but spatially homogeneous roughness distributions, is examined. The parametric study for the Falkner-Skan-Cooke family of boundary layers supports our earlier conjecture that the initial amplitudes of roughness-induced stationary vortices are likely to be significantly larger than the amplitudes of similarly induced nonstationary vortices in the presence of acoustic disturbances in the free stream. Maximum unsteady receptivity occurs when the acoustic velocity fluctuation is aligned with the wave-number vector of the unsteady vortex mode. On the other hand, roughness arrays that are oriented somewhere close to the group velocity direction are likely to produce higher instability amplitudes. Limitations of the nonasymptotic theory are discussed, and future work is suggested.Financial support for this work was provided by the Theoretical Flow Physics Branch at the NASA Langley Research Center, Hampton, VA 23681, under Contract No. NAS1-19299.     

Hydrothermal Synthesis and Characterization of VSZ-3 Zeolite Crystals

Zeolite crystals (named here VSZ-3) synthesized at 350°C by hydrothermal method are illustrated and described. These crystals are shown to be analcime type zeolites. It is established that their size is the largest among the zeolite crystals ever reported, and are stable upto 1000°C. The VSZ-3 crystals are prismatic pyramidal and needle-like. They are characterized by X-rays, SEM, TGA, DTA and IR. Their chemical composition is shown to be 5.95 SiO₂ ṁ Al₂O₃ ṁ 0.91 Na₂O ṁ 0.17 H₂O. Mechanism of growth of these crystals is explained.     

Novel approach in the synthesis of imidazo [1, 2-a] pyridine from phenyl acrylic acids

This paper describes highly efficient concise method for the synthesis of imidazo[1,2-a] pyridine. It is a first report employing, amino pyridines, copper nitrate, and phenyl acrylic acids in the synthesis of imidazo[1,2-a] pyridine. The silent features of the devised protocol include the high yield, milder reaction conditions, and shorter reaction time.