Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

Physicochemical Characterization and Paper Spray Mass Spectrometry Analysis of Myrciaria Floribunda (H. West ex Willd.) O. Berg Accessions

Myrciaria floribunda, also known as rumberry, is a tree native to the Brazilian Atlantic Forest, where its fruits have the potential for commercial use. This study evaluates the antioxidant potential, determines the phytochemical profile, and chemically characterizes the rumberry fruit. Accessions were sampled from the Rumberry Active Germplasm Bank of the Federal University of Alagoas, Brazil. Physical characteristics, chemical characteristics, and phenolic compound content were analyzed. Chemical profile characterization was carried out using PSMS. Accessions had an average weight of 0.86 g. Accession AC137 presented a higher pulp yield (1.12 g). AC132 and AC156 had larger fruits, AC137 showed greater firmness (5.93 N), and AC160 had a higher and total phenolic content ratio (279.01 ± 11.11). Orange-colored accessions scored higher in evaluated parameters, except for AC160 for phenolic content. Thirty-two compounds were identified on positive ionization mode and 42 compounds on negative ionization mode using PSMS. Flavonoids, followed by the derivatives of benzoic acid, sugars, and phenylpropanoids, were the most prominent. Myricitrin, quercitrin, and catechin stand out as flavonoids that have been reported in previous studies with antioxidant and antimicrobial properties, in addition to health and therapeutical benefits, demonstrating the potential of the rumberry fruit.     

Molecular volume calculation using AM1 semi-empirical method toward diffusion coefficients and electrophoretic mobility estimates in aqueous solution

Diffusion coefficients and electrophoretic mobility are two important physicochemical parameters used in mass transport phenomenon studies. The volume of the solute is required to determine or estimate these parameters. Classical methods, such as the LeBas method are commonly used. However, although valid, this method may represent a boring and time-consuming task, depending on the nature and number of compounds to be calculated. In this study, the volumes of a series of neutral and charged substances of the main functional groups present in organic molecules, amino acids, drugs and diverse compounds, such as cytosine and glucose, were calculated according to the LeBas method (V_M) and the AM1 semi-empirical method, V_W(AM1). The latter showed to be statistically coincident with the former. Employed as a pure value or corrected by the LeBas molar volume, the AM1 molecular volume was also demonstrated to estimate the diffusion coefficients in infinite aqueous dilution within an acceptable average error, according to the Othmer–Thakar, Wilke–Chang and Hayduk–Laudie methods, as well as the electrophoretic mobility of charged substances, such as carboxylates and protonated amines. According to these results, the AM1 method was seen to be statistically valid to calculate molecular volume. Many advantages in the construction of most diverse structures were noted, as well as a reduction in time and an increase in the quality of the information, when run on molecular modeling software.     

New Chemistry of α-Silyl Vinylsulfides

α-Silyl Vinylsulfides, obtained in a stereoselective manner through enethiolizable silyl thioketones, can be used for the synthesis of vinylsulfides and vinylsilane with a specific geometry, and for the preraration of bicyclic and open chain thiofunzionalized enones.     

Determination of the Chemical Structure of Poly-β (-)-pinene by NMR Spectroscopy

This paper is dedicated to the memory of our friend and colleague Annalaura Segre.

The chemical structure of a series of β (-)-pinene polymers (PBP) obtained by radiation-induced polymerization, free radical initiation, cationic polymerization over a Friedel-Craft catalyst and by coordinative polymerization over a Ziegler-Natta catalyst has been fully elucidated by ¹H and ¹³C-NMR spectroscopy. 2D NMR techniques have been applied in order to assign all the NMR resonances to the structures of the PBP investigated. The NMR spectra show that the most regular PBP structure is obtained by radiation-induced polymerization followed by the free radical initiated polymerization. The most defective structure has been observed in the case of PBP prepared by cationic mechanism over a Friedel-Crafts catalyst. The discussion accounts for different types of defects and cross-links present in the PBPs investigated whose fundamental structure is based on the p-menthene repeating unit.

NMR self-diffusion measurements have been performed to evaluate the molecular weight of all the PBP investigated. The highest molecular weight (2600 Dalton) was found in the case of PBP prepared by Ziegler-Natta catalyst, while the lowest molecular weight was found in the case of PBP prepared by radiation-induced polymerization (about 1000 Dalton).     

Structures and properties of solvated and unsolvated isopropyl functionalised calix[4]arenes

The tetra-isopropyl ethers of calix[4]arene and p-t-butylcalix[4]arene have been isolated in the cone conformation, and structurally characterised as chloroform solvates. Thermogravimetric analysis demonstrated that the parent isopropylcalix[4]arene solvate is significantly more stable than the p-t-butylcalix[4]arene analogue, retaining the solvent up to a temperature of 125°C. It was found that the calix[4]arene ether sublimes at atmospheric pressure, and solvent-free crystals appropriate for structure determination were produced at reduced pressure. The p-t-butylcalix[4]arene ether was also isolated without solvent in the lattice, but in this case the calixarene was crystallised from acetone, as sublimation did not produce crystals of sufficient quality.     

Determination of the two major endocannabinoids in human plasma by μ-SPE followed by HPLC-MS/MS

Endocannabinoids (ECs) are endogenous compounds that interact with type-1 and type-2 cannabinoid receptors (CB₁ and CB₂), as well as non-cannabinoid receptors. The multitude of roles attributed to ECs makes them an emerging target of pharmacotherapy for a number of disparate diseases. Here a high-throughput bioanalytical method based on micro SPE (μ-SPE) followed by LC-MS/MS analysis for the simultaneous determination of the two major endocannabinoids 2-arachidonoylglycerol (2-AG) and N-arachidonoylethanolamine (anandamide, AEA) in human plasma is presented. The chromatographic conditions obtained with the fused-core column allowed a good separation in 10 min also of the AG isomers. A very simple and reliable extraction has been optimised by means of C18-modified tips: it requires only 100 μL of plasma and allows the use of minimal volumes of organic solvent. The present method allows a rapid and effective clean-up, which also minimises the isomerisation of 2-AG. The whole procedure has been validated following the FDA guidelines for bioanalytical methods validation: the satisfactory recovery values, the negligible matrix effect and the good values of accuracy and reproducibility make it a simple and high-throughput analytical tool for clinical and biochemical studies on endocannabinoid signaling in humans.

Light Lanthanide Metallocenium Cations Exhibiting Weak Equatorial Anion Interactions

As the dysprosocenium complex [Dy(Cp^ttt)₂][B(C₆F₅)₄] (Cp^ttt=C₅H₂tBu₃-1,2,4, 1-Dy ) exhibits magnetic hysteresis at 60 K, similar lanthanide (Ln) complexes have been targeted to provide insights into this remarkable property. We recently reported homologous [Ln(Cp^ttt)₂][B(C₆F₅)₄] ( 1-Ln ) for all the heavier Ln from Gd–Lu; herein, we extend this motif to the early Ln. We find, for the largest Ln^III cations, that contact ion pairs [Ln(Cp^ttt)₂{(C₆F₅-κ¹-F)B(C₆F₅)₃}] ( 1-Ln ; La–Nd) are isolated from reactions of parent [Ln(Cp^ttt)₂(Cl)] ( 2-Ln ) with [H(SiEt₃)₂][B(C₆F₅)₄], where the anion binds weakly to the equatorial sites of [Ln(Cp^ttt)₂]⁺ through a single fluorine atom in the solid state. For smaller Sm^III, [Sm(Cp^ttt)₂][B(C₆F₅)₄] ( 1-Sm ) is isolated, which like heavier 1-Ln does not exhibit equatorial anion interactions, but the Eu^III analogue 1-Eu could not be synthesised due to the facile reduction of Eu^III precursors to Eu^II products. Thus with the exception of Eu and radioactive Pm this work constitutes a structurally similar family of Ln metallocenium complexes, over 50 years after the [M(Cp)₂]⁺ series was isolated for the 3d metals.