Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

The six semifield planes associated with a semifield flock

In 1965 Knuth (J. Algebra 2 (1965) 182) noticed that a finite semifield was determined by a 3-cube array (a_ijk) and that any permutation of the indices would give another semifield. In this article we explain the geometrical significance of these permutations. It is known that a pair of functions (f,g) where f and g are functions from GF(q) to GF(q) with the property that f and g are linear over some subfield and g(x)²+4xf(x) is a non-square for all x∈GF(q)∗, q odd, give rise to certain semifields, one of which is commutative of rank 2 over its middle nucleus, one of which arises from a semifield flock of the quadratic cone, and another that comes from a translation ovoid of Q(4,q). We show that there are in fact six non-isotopic semifields that can be constructed from such a pair of functions, which will give rise to six non-isomorphic semifield planes, unless (f,g) are of linear type or of Dickson-Kantor-Knuth type. These six semifields fall into two sets of three semifields related by Knuth operations.     

Volume comparison and the σk-Yamabe problem

In this paper we study the problem of finding a conformal metric with the property that the kth elementary symmetric polynomial of the eigenvalues of its Weyl-Schouten tensor is constant. A new conformal invariant involving maximal volumes is defined, and this invariant is then used in several cases to prove existence of a solution, and compactness of the space of solutions (provided the conformal class admits an admissible metric). In particular, the problem is completely solved in dimension four, and in dimension three if the manifold is not simply connected.     

Regularity, partial elimination ideals and the canonical bundle

We present partial elimination ideals, which set-theoretically cut out the multiple point loci of a generic projection of a projective variety, as a way to bound the regularity of a variety in projective space. To do this, we utilize a combination of initial ideal methods and geometric methods. We first define partial elimination ideals and establish through initial ideal methods the way in which, for a given ideal, the regularity of the partial elimination ideals bounds the regularity of the given ideal. Then we explore the partial elimination ideals as a way to compute the canonical bundle of the generic projection of a variety and the canonical bundles of the multiple point loci of the projection, and we use Kodaira Vanishing to bound the regularity of the partial elimination ideals.

     

Surface tension and density measurements for indium and uranium using a sessile-drop apparatus with glow discharge cleaning

The sessile-drop method is used to measure the surface tension and density of liquid indium and uranium under high vacuum. Measurements are made over the temperature range 156–500°C for In and at the melting point for U. Surface oxides are efficiently removed with a glow discharge system. Drop profiles are captured by photograph and processed using nonlinear regression to yield the surface tension and density. In this regression procedure, normal distances from calculated profiles to data points are minimized. For indium, the density and surface tension measurements yield _mp = 7.05 × 10³kg/m³, d/dT = −0.776 kg/m³·°C, and γ_mp = 0.568 N/m, dγ/dT = −9.45 × 10⁻⁵ N/m·°C. The results for uranium at the melting point are _mp = 17.47 × 10³ kg/m³ and γ_mp = 1.653 N/m.     

On the stereochemistry of palmerolide A

Degradative studies of the anticancer macrolide palmerolide A have resulted in re-assignment of the C-7, C-10, and C-11 stereocenters.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Irreducible Components of Fixed Point Subvarieties of Flag Varieties

Suppose G is a connected reductive algebraic group, P is a parabolic subgroup of G, L is a Levi factor of P, and e is a regular nilpotent element in Lie L. We assume that the characteristic of the underlying field is good for G. Choose a maximal torus, T, and a Borel subgroup, B, of G, so that T?B∩L, B ? P and e ∈ Lie B. Let β be the variety of Borel subgroups of G and let ??_e be the subset of ?? consisting of Borel subgroups whose Lie algebras contain e. Finally, let W be the Weyl group of G with respect to T. For ω ∈ W let ??_ω be the B-orbit in ?? containing ^ωB. We consider the intersections ??_ω ∩ ??_e. The main result is that if dim ??_ω ∩ ??_e = dim ??_e, then ??_ω ∩ ??_e is an affine space. Thus, the irreducible components of ??_e are indexed by Weyl group elements. It is also shown that if G is of type A, then this set of Weyl group elements is a right cell in W.     

Orientational ordering of liquid crystals containing a difluoro-substituted phenyl ring

The orientational ordering of several liquid crystals containing a difluorosubstituted phenyl ring has been studied through the use of C-13 NMR. The fluorinated phenyl ring of these liquid crystals have C_s symmetry, so three order parameters are required to completely describe the ordering of this ring. All three of these order parameters have been calculated from carbon-fluorine dipolar coupling constants obtained from the carbon-fluorine splittings in the C-13 NMR spectra. Because of the complexity of the fluorine-coupled spectra, variable angle spinning (VAS) was used to resolve the carbon-fluorine splittings. In order to study the orientational ordering over wide ranges of temperature, we have developed an empirical correlation between the order parameter and the value of a carbon-fluorine dipolar coupling constant. This enabled us to study the change in the order parameter with temperature. The results of applying this method to several structurally similar liquid crystals containing the same type of difluorinated phenyl ring are presented. A comparison is made to a similar mono-fluorinated liquid crystal.     

The Ideal Retraction Property for Idempotent Semigroups

A semigroup S is said to have the ideal retraction property provided each of its ideals is the image of an idempotent endomorphism of S. The main result of this work is a characterization of those bands which have the idempotent retraction property. All such bands are normal.