Proton–proton bremsstrahlung towards the elastic limit at 190 MeV incident beam energy

A series of nucleon–nucleon bremsstrahlung (NNγ) experiments at 190 MeV incident beam energy have been performed at KVI in order to gain more insight into the dynamics governing the bremsstrahlung reaction. After initial measurements wherein the bremsstrahlung process was studied far away from the elastic limit, a new study was used to probe the process nearer to the elastic limit by measuring at lower photon energies. Measured cross sections and analyzing powers are compared with the predictions of a microscopic model and those of two soft-photon models. The theoretical calculations overestimate the data by up to ≈30%, for some kinematics.     

Magnetisation reversal in media with perpendicular anisotropy

In this paper, we discuss two key aspects of magnetisation reversal in magnetic thin films with perpendicular anisotropy. Firstly, a study has been made of the additional field required to erase data written perpendicular to a thin film recording disk as the linear data density is increased. It has been found that an increase in data density from 40 to 360 kfci results in an increase of 1.25 kOe in the field required to erase the data. Secondly, the effect of varying the level of exchange coupling by co-sputtering CoCrPt samples with SiO₂ has been studied using a characterisation technique that is independent of the self-demagnetising field. It has been found that the samples are fully exchange de-coupled when the film contains >9.8% SiO₂ and the activation volume of reversal remains constant for higher levels of SiO₂.     

Mössbauer, X-ray diffraction and magnetization studies of Fe–Mn–Al–Nb alloys prepared by high energy ball milling

Fe₆₀Mn₁₀Al₂₀Nb₁₀, (Fe₆₀Mn₁₀Al₃₀)₉₅Nb₅ and (Fe₆₀Mn₁₀Al₃₀)₉₀Nb₁₀ ball milled powdered alloys were investigated using X-ray diffraction, Mössbauer spectrometry, thermomagnetic (TGM) and magnetization measurements. We studied the influence of Nb content and of different milling times on the structural and magnetic properties. Two main features can be concluded: (1) the FeAlMn induces a BCC phase whatever the Nb content is, and (2) as both increasing Nb content and milling time give rise to an highly disordered state in conjunction with a decrease of the ferromagnetic behavior.     

Energy level alignment between C60 and Al using ultraviolet photoelectron spectroscopy

The energy level alignment between C₆₀ and Al has been investigated by using ultraviolet photoelectron spectroscopy. To obtain the interfacial electronic structure between C₆₀ and Al, C₆₀ was deposited on a clean Al substrate in a stepwise manner. The valence-band spectra were measured immediately after each step of C₆₀ deposition without breaking the vacuum. The measured onset of the highest occupied molecular orbital energy level was located at 1.59 eV from the Fermi level of Al. The vacuum level was shifted 0.68 eV toward lower binding energy with additional C₆₀ layers. The observed vacuum level shift means that the interface dipole exists at the interface between C₆₀ and Al. The barrier height of electron injection from Al to C₆₀ is 0.11 eV, which is smaller value than that of hole injection.     

X-PEEM/NEXAFS and AFM of polypyrrole and copper micro-patterns on insulating fluoropolymer substrates

Micro-patterns (80 μm and 10 μm) of copper and semi-conducting polypyrrole on insulating fluorinated ethylene propylene substrates were characterized using synchrotron-based X-ray Photoemission Electron Microscopy (X-PEEM), Near Edge X-ray Absorption Fine Structure (NEXAFS), and Atomic Force Microscopy (AFM). Electronic states in the polypyrrole are verified using the NEXAFS data, and sample degradation upon irradiation is addressed. X-PEEM images show homogeneous distributions of the corresponding elements in the patterns. They do not exhibit dichroic effects and give information about the growth of copper and polypyrrole (i.e. nucleation of Cu, overgrowth of PPy, formation of PPy granules). AFM results are used to verify the topography of the patterns and support the findings on pattern growth.     

Thickness dependence of the magnetic anisotropy of Fe layers separated by Al

Magnetic multilayers of ⁵⁷Fe with nominal thickness, T _nom, between 0.4 and 1.0 nm separated by 3.0 nm Al spacer layers were prepared by alternate deposition of the constituents in high vacuum. The samples were investigated at 4.2 K in external magnetic field. A fraction of Fe atoms corresponding to about 0.3 nm equivalent Fe-thickness was found to mix into the Al spacer. The extremely strong magnetic anisotropy observed for T _nom < 0.8 nm is attributed to Fe layers of approximately two atomic planes thick. The anisotropy decreases considerably after the building up of the third Fe atomic layer starts at T _nom = 0.8 nm, but full saturation was not achieved even for T _nom = 1 nm and 3 T magnetic field applied perpendicularly to the sample plane.     

ENSTAR detector forη- mesic studies

We have initiated a search for a new type of nuclear matter, theη-mesic nucleus, using beams from the multi-GeV hadron facility, COSY at Juelich, Germany. A large acceptance scintillator detector, ENSTAR has been designed and built at BARC, Mumbai and fully assembled and tested at COSY. A test run for calibration and evaluation has been completed. In this contribution we present the design and technical details of the ENSTAR detector and how it will be used to detect protons and pions (the decay products ofη-mesic bound state). The detector is made of plastic scintillators arranged in three concentric cylindrical layers. The readout of the detectors is by means of optical fibres. The layers are used to generate ΔE –E spectra for particle identification and total energy information of stopped particles. The granularity of the detector allows for position (θ and ?ø determination making the event reconstruction kinematically complete     

Stable hysteretic reflection of light at a nonlinear interface

We have observed a hysteretic (bistable) reflection of a Gaussian laser beam at the interface between glass and a liquid solution of polystyrene microspheres as nonlinear medium with both branches of the hysteretic curve being stable, in contrast to the results of previous experiments.     

Resonant-induced transparency and coupled modes in layered metamaterials

We present an overview of some of our work on transmission properties and mode characteristics of layered metamaterials and their potential applications. In particular, we will show how layered metamaterials exhibit unusual transmission properties and unconventional features of guided modes, such as resonance-induced transparency in multilayer structures and slope reversal of dispersion curves in coupled waveguides. PACS 78.67.-n; 73.21.Ac; 61.46.+w; 42.25.Bs; 42.82.Et     

Infrared combination and difference bands of the NO dimer

The mid-infrared (1500-3800 cm⁻¹) absorption spectrum of gaseous nitric oxide has been studied at low temperature (99 K) with a long absorption path (160 m) in order to observe weak combination, difference, and overtone bands of the NO dimer. About ten new bands were assigned with greater or lesser certainty. Combined with previous results, they lead to a set of 12 secure and 7 tentative vibrational term values for (NO)₂, essentially doubling our knowledge of NO dimer vibrational states. The strongest non-fundamental bands in this region, other than the ν₁ (symmetric N-O stretch) + ν₅ (asymmetric N-O stretch) overtone, involve combinations of ν₅ with ν₃ (intermolecular stretch). Excitation of ν₅ results in increased frequencies for the intermolecular modes ν₂, ν₃, and ν₄. A new value of 155.5 cm⁻¹ was obtained for ν₄, the elusive infrared-inactive out-of-plane fundamental vibration.