Properties of Ca-containing LiCoPO<Subscript>4</Subscript>-graphitic carbon foam composites

LiCo_1???x Ca _x PO₄–graphitic carbon foam composites are prepared using a sol–gel method. The structural analysis reveals LiCoPO₄ as major crystalline phase and Co₂P₂O₇ (for x?=?0.0) and Co₂P, Li₃PO₄, and (Ca,Co)₃(PO₄)₂ (for x?≥?0.05) as secondary phases. The morphology consists of microcrystalline “islands” with acicular crystallites (5–50 μm size). Transmission electron microscopy (TEM) of the powders showed that the Ca is incorporated into the crystal structure evoking exaggerated grain growth. The voltammetric profiles show a decrease of the voltammetric surface between anodic and cathodic sweeps and a shift of the reduction potentials toward higher values (～4.6 V, x?=?0.1). The electrochemical measurements, at a discharge rate of C/10 (room temperature), show an increase of the discharge-specific capacity from 100 mAhg^?1 for x?=?0.0 to 104 mAhg^?1 for x?=?0.1. The ac impedance spectroscopy data revealed an improvement of the Li-ion conductivity at high content of Ca ions (x?=?0.1).     

Reversible N-Heterocyclic Carbene-Induced α-H Abstraction in Tungsten(VI) Imido Dialkyl Dialkoxide Complexes

The first reversible N-heterocyclic carbene (NHC) induced α-H abstraction in tungsten(VI) imido-dialkyl dialkoxide complexes is reported. Treatment of W(NAr)(CH₂Ph)₂(OtBu)₂ (Ar=2,6-dichlorophenyl, 2,6-dimethylphenyl, 2,6-diisopropylphenyl) with different NHCs leads to the formation of complexes of the type W(NAr)(CHPh)(NHC)(CH₂Ph)(OtBu) in excellent isolated yields of up to 96 %. The highly unusual release of the tert-butoxide ligand as tBuOH in the course of the reaction was observed. The formed alkylidene complexes and tBuOH are in an equilibrium with the NHC and the dialkyl complexes. Reaction kinetics were monitored by ¹H NMR spectroscopy. A correlation between the steric and electronic properties of the NHC and the reaction rates was observed. Kinetics of a deuterium-labeled complex in comparison to its non-deuterated counterpart revealed the presence of a strong primary kinetic isotope effect (KIE) of 4.2, indicating that α-H abstraction is the rate-determining step (RDS) of the reaction.     

Proton Magnetic Resonance in Partially Deuterated Trans - Polyacetylene

Proton NMR measurements as a function of ^l H concentration in partially deuterated trans-(CH_zD_1-z)_x show that at high ¹H content the proton relaxation is ^{z 1-z x}homogeneous and reflects the dynamics of electronic spins. At low concentration, protons of residual catalyst (about 6% per CH unit) dominate the NMR results, misleading earlier analysis.     

Homogeneous time resolved fluorescence resonance energy transfer using rare earth cryptates as a tool for probing molecular interactions in biology

A homogeneous assay technology using time resolved fluorescence and fluorescence resonance energy transfer is described. A new class of fluorescent complexes, the cryptates, have been used as fluorescent donor with cross-linked allophycocyanin as acceptor. This new donor/acceptor shows an exceptionally high F?rster distance R0 of 9 nm. This allows to build up a set of strategies to probe the interactions of biomolecules in biology, particularly for high throughput screening applications. In this article, we describe the basics of the technology and review applications developed for studying different key molecular interactions involved in cellular processes.     

Amorphous blends of poly(zwitterions) and zwitterionomers of the ammonioalkoxydicyanoethenolate type with some alkali metal salts

Poly(zwitterions) and zwitterionomers of the ammonioethoxydicyanoethenolate type (functional dipolar unit R ₃N⁺–(CH ₂) ₂–O–CO–C^?–(CN) ₂, µ = 25.9 D) show the very specific property of solvation of some alkali metal salts to yield amorphous blends. For homopolymers in the (meth)acrylic series, solvation is observed up to a ratio r = [salt]/[zwitterion] of 1 for LiClO ₄ and NaSCN and of 0.5 for NaCF ₃SO ₃: it results in a significant plasticization (increasing order LiClO ₄ < NaSCN < NaCF ₃SO ₃) and in the development in some cases of a poorly defined (lamellar?) local order, as evidenced by the presence of a single broad peak in the small‐angle x‐ray scattering (SAXS) patterns (Bragg distances of about 15–20 Å). For the amorphous blend of a biphasic poly(tetramethyleneoxide) segmented zwitterionomer and NaCF ₃SO ₃ (r = 0.5), selective solvation of the salt in the hard zwitterionic domains induces a transition from a lamellar structure (zwitterionic sublayer of about 9 Å thickness) to an hexagonal packing of ionic‐zwitterionic cylinders (radius of about 15 Å). Ionic conductivity, measured in a narrow range of temperature just above the glass transition temperature, is characterized for most systems by an activation energy of about 1–1.8 eV; the drastic decrease of the conductivity by a factor of 10 ³, when going from the homopolymer to the zwitterionomer blends, is typical of the inhibition of the ionic percolation process by the lack of connectivity of the ionic‐zwitterionic domains. Copyright © 2001 John Wiley & Sons, Ltd.     

Selective Etching of Silicon from Ti3SiC2 (MAX) To Obtain 2D Titanium Carbide (MXene)

Until now, MXenes could only be produced from MAX phases containing aluminum, such as Ti₃AlC₂. Here, we report on the synthesis of Ti₃C₂ (MXene) through selective etching of silicon from titanium silicon carbide—the most common MAX phase. Liters of colloidal solutions of delaminated Ti₃SiC₂‐derived MXene (0.5–1.3 mg mL^?1) were produced and processed into flexible and electrically conductive films, which show higher oxidation resistance than MXene synthesized from Ti₃AlC₂. This new synthesis method greatly widens the range of precursors for MXene synthesis.     

Thermal, spectral and AFM studies of calcium silicate hydrate-polymer nanocomposite material

A non-ionic polymer (poly(vinyl alcohol) (PVA)) has been incorporated into the inorganic layers of calcium silicate hydrate (C–S–H) during precipitation of quasicrystalline C–S–H from aqueous solution. C–S–H and a C–S–H-polymer nanocomposite (C–S–HPN) material were synthesized and characterized by X-ray fluorescence (XRF), energy dispersive spectroscopy (EDS), ²⁹Si magic angle spinning nuclear magnetic resonance (²⁹Si MAS NMR) and ¹³C cross-polarization nuclear magnetic resonance (¹³C CP NMR) spectroscopy, atomic force microscopy (AFM), thermal conductivity, thermogravimetric analysis (TG) and differential thermal analysis (DTA). Thermal conductivity of PVA, C–S–H and C–S–HPN material was studied in the temperature range 25–50°C. C–S–HPN materials exhibited the highest thermal conductivity at 25 and 50°C. The thermal conductivity increases from 25 to 50°C are 7.03, 17.46 and 14.85% for PVA, C–S–H and C–S–HPN material, respectively. Three significant decomposition temperature ranges were observed on the TG curve of C–S–HPN material.     

Poly(ammonioalkanesulfonate) Blends with Polar Organic Species and Alkali Metal Salts: Structure,Glass Transition and Ionic Conductivity

Because the dipole moment of its zwitterionic side group is very high (μ∼23 D), poly[3-(N,N-diethyl-N-(5-methacryloyoxy-3-oxopentyl)-ammonio) propanesulfonate] affords a unique polar host matrix possessing a strong solvation power towards a variety of polar or ionic guest species. Water, glycerol, liquid ethylammonium nitrate, triethylammoniopropanesulfonate are all good plasticizers with a fairly similar efficiency of ΔT_g∼−2°C/mol% of additive, while a dizwitterion behaves as a weak antiplasticizer. The stoichiometric blends of the polyzwitterion with alkali metal salts of low enough lattice energy such as thiocyanates, trifuoromethanesulfonates, iodides, perchlorates, tetrafluoro or tetraphenylborates, are amorphous systems showing a single glass transition, with plasticization or antiplasticization effects depending on the salt nature. Microphase separation systematically occurs in these binary systems but long-range order is observed only in some cases, with development of lamellar (I⁻) or hexagonal (SCN⁻) structures. Conductivity increases and the dielectric constant of the material decreases as salt is added. The activation energies of the conductivity are not strongly affected either by the state of the material, glassy or viscoelastic, or by the salt nature. © 1997 John Wiley & Sons, Ltd.     

Development of a high pressure stirring cell up to 2 GPa: a new window for chemical reactions and material synthesis

ABSTRACT

A new method for stirring under high pressure conditions has been developed and tested. The key component is a Teflon cell assembly equipped with magnetic stirring function, which is capable to operate across a wide pressure range, up to at least 2?GPa, in a large volume press. The setup enables adjustable stirrer rotation rate and detection of stirring in a sample, e.g. to observe liquid–solid phase transitions at high pressure. The viscosity limit of stirring is ca. 500 times that of water at room temperature (i.e. ～500?mPas). Moreover, we show that zinc oxide nanoparticles hydrothermally synthesized at 0.5?GPa and 100°C under stirring conditions show an order of magnitude smaller size (100?nm) compared to those synthesized under non-stirring conditions (1?μm). The wide pressure range for stirring of viscous media opens interesting possibilities to produce novel materials via hydrothermal synthesis and chemical reactions.