An orienteering model for the search and rescue problem

In this paper, we propose a new model for the search and rescue problem. We focus on the case of a single airborne search asset through a connected space and continuous time with a maximum travel time \(T\) . The intent is to maximize the detection of a cooperative target (search and rescue). The proposed model is based on the assumption of existing a priori information (e.g., result of information fusion process) to establish a spatial distribution of probability of containment in possible geographic locations. The possibility area is defined using a cut threshold on the probability of containment and the search path as well as the allocation of the level of effort to each region in the search space is obtained based on an orienteering model. We illustrate the application of the proposed model on an empirical example.     

Surface morphology of Ge‐modified 3C‐SiC/Si films

The influence of Ge deposition prior to carbon interaction with 3° off‐axis Si(111) substrates on the structural and morphological properties of the formed silicon carbide (SiC) layer is studied. In situ reflection high‐energy electron diffraction (RHEED) and X‐ray diffraction (XRD) revealed the formation of the cubic silicon carbide (3C‐SiC) modification. In situ spectroscopic ellipsometry measurements revealed a decreasing 3C‐SiC thickness with increasing Ge predeposition. Atomic force microscopy (AFM) studies revealed that the surface overlayer morphology is mainly formed by periodic step arrangements whose relevant geometric parameters, i.e. lateral separation, height and terrace width, depend on the Ge content. Besides the changes of the step morphology, the surface roughness and the grain size and the strain of the formed 3C‐SiC decreases with increasing germanium precoverage. Copyright © 2008 John Wiley & Sons, Ltd.     

SiC polytypes process affected by Ge predeposition on Si(111) substrates

Structural and optical measurements were performed on silicon carbide (SiC) samples containing several polytypes. The SiC samples investigated were grown on (111) Si substrates by solid source molecular beam epitaxy (SSMBE). Several quantities of Ge were predeposited before the growth procedure. The influence of Ge on the SiC polytypes formation was studied by X-Ray, FTIR and μ-Raman characterizations methods. The spectra of the samples with less than one Ge monolayer exhibit a mixture of 2H, 15R and 3C–SiC polytypes. This mixture is due to the mismatch between the heterostructure layers. We propose that the Ge predeposition in the heterostructure can be used to stabilize and unify the polytypes formation.     

Surface and interface phonons and related topics

We analyze the state of the art of surface and interface phonons with an emphasis on their relevance to many aspects of surface and interface physics.     

Studies of interface phonons

The vibrational modes localized at the interface between two distinct crystals have been studied for a simple crystal model obeying all of the invariance conditions required for models used in studies of dynamical properties of crystal surfaces, and giving rise to Rayleigh surface waves. The two crystals are assumed to be semi-infinite simple cubic and to have the same lattice parameter a. They differ by their mass (M and M_A) and the central force interactions between first (K and K_a) and second nearest neighbors $\text{1}\text{2}\text{K}$ and $\text{1}\text{2}\text{K}{}_{\mathrm{A}}$. The interface is obtained by coupling the (001) free surfaces of these distinct crystals by central force intractions (K^'). We find that the variation of the interaction conditions (K^') at the interface and of the $\text{(}\text{K}\text{M}\text{)}\text{(}\text{K}{}_{\mathrm{A}}\text{M}{}_{\mathrm{A}}\text{)}$ parameter has the following qualitative effects on the properties of surface and bulk phonons. When (K^') increases from zero to a finite value, the frequencies of the surface phonons increase and are splitted in the case of two identical crystals. One can say that the surface phonons are transformed into interface modes. For some values of $\text{K}{}^{\mathrm{\text{'}}}\text{K}$ and $\text{(}\text{K}\text{M}\text{)}\text{(}\text{K}{}_{\mathrm{<mtext>A</mtext>}}\text{M}{}_{\mathrm{<mtext>A</mtext>}}\text{)}$ parameters these interface phonons may be admixed with bulk phonons and thus become virtual interface states.     

Effects of Turbulence, Evaporation and Heat Release on the Dispersion of Droplets in Dilute Spray Jets and Flames

The dispersion characteristics of a selection of non-evaporating non-reacting, evaporating non-reacting, and reacting dilute spray jets issuing in ambient air (Gounder et al, Combust Sci Technol 182:702–715, 2010; Masri and Gounder, Combust Flame 159:3372–3397, 2010) and in a hot coflow (Oloughlin and Masri, Flow Turbul Combust 89:13–35, 2012) are analysed. Other than the cases found in those contributions, two additional sprays of kerosene have been investigated in order to systematically study the effects of evaporation. The burners are well designed such that boundary conditions may be accurately measured for use in numerical simulations. The dynamics and dispersion characteristics are analysed by conditioning results on the droplet Stokes numbers and by systematically investigating changes in dispersion and dynamics as a function of carrier air velocity, liquid loading, ignition method, and location within the flame or spray jet. The tendency for droplet dispersion defined by the ratio of radial rms velocity to axial mean velocity varies significantly between reacting and non-reacting flows. However, dispersion is found to be largely unaffected by evaporation. The total particle concentration, or number density of droplets within the spray has also been used as a direct measure of spray dispersion with the effect of evaporation on a turbulent polydisperse spray being isolated by investigating acetone and kerosene sprays with similar boundary conditions. The rate of change of droplet size with radial position is almost identical for the kerosene and acetone cases. The dispersion characteristics, closely related to the ‘fan spreading’ phenomenon are dependant on the carrier air velocity and axial location within the spray.     

Finite Rate Chemistry Effects in Highly Sheared Turbulent Premixed Flames

Detailed scalar structure measurements of highly sheared turbulent premixed flames stabilized on the piloted premixed jet burner (PPJB) are reported together with corresponding numerical calculations using a particle based probability density function (PDF) method. The PPJB is capable of stabilizing highly turbulent premixed jet flames through the use of a small stoichiometric pilot that ensures initial ignition of the jet and a large shielding coflow of hot combustion products. Four lean premixed methane-air flames with a constant jet equivalence ratio are studied over a wide range of jet velocities. The scalar structure of the flames are examined through high resolution imaging of temperature and OH mole fraction, whilst the reaction rate structure is examined using simultaneous imaging of temperature and mole fractions of OH and CH₂O. Measurements of temperature and mole fractions of CO and OH using the Raman–Rayleigh–LIF-crossed plane OH technique are used to examine the flame thickening and flame reaction rates. It is found that as the shear rates increase, finite-rate chemistry effects manifest through a gradual decrease in reactedness, rather than the abrupt localized extinction observed in non-premixed flames when approaching blow-off. This gradual decrease in reactedness is accompanied by a broadening in the reaction zone which is consistent with the view that turbulence structures become embedded within the instantaneous flame front. Numerical predictions using a particle-based PDF model are shown to be able to predict the measured flames with significant finite-rate chemistry effects, albeit with the use of a modified mixing frequency.     

Dual input–output pairs for modeling hysteresis inspired by mem-models

We call attention to a dual-pair concept for modeling hysteresis involving instantaneous switching: Specifically, there are two input–output pairs for each hysteresis model under one specific input, namely a differential pair and an integral pair. Currently in engineering mechanics, only one pair is being recognized and utilized, not the other. Whereas this dual-pair concept is inherent in the differential and algebraic forms of memristors and memcapacitors, the concept has not been carried over to memristive system theory, nor to memcapacitive system theory. We show that the “zero-crossing” feature in memristors, memcapacitors, and memristive/memcapacitive models (i.e., the “mem-models”) is also a feature of the differential pairs of well-known non-mem-models, examples of which are Ramberg–Osgood, Bouc–Wen, bilinear hysteresis, and classical Preisach. The dual-pair concept thus connects mem-models and non-mem-models, thereby facilitating the modeling of hysteresis, and raising a set of scientific questions for further studies that might not otherwise come to awareness.     

Investigation of Lifted Flame Propagation Under Pulsing Conditions Using High-Speed OH-LIF and LES

Flame propagation in a lifted flame subjected to a transient velocity pulse is investigated using high-speed OH-LIF and Large Eddy Simulation (LES). The design of the burner, taking the requirements of the simulations into consideration, comprises an attached and lifted CNG jet flame in a mild air co-flow, forced to transition by a controlled mass flow pulse of fuel. The high-speed images taken at 5 kHz show a rapid lifting of the flames upon pulsation before the flame base propagates back towards the nozzle. The resulting steady state position differed from the initial lift-off position, consistent with the previously observed hysteresis concept. Calculations using LES along with detailed chemistry are shown to capture the basic features observed in the experiment.     

Development of adaptive modeling techniques for non-linear hysteretic systems

Adaptive estimation procedures have gained significant attention by the research community to perform real-time identification of non-linear hysteretic structural systems under arbitrary dynamic excitations. Such techniques promise to provide real-time, robust tracking of system response as well as the ability to track time variation within the system being modeled. An overview of some of the authors’ previous work in this area is presented, along with a discussion of some of the emerging issues being tackled with regard to this class of problems. The trade-offs between parametric-based modeling and non-parametric modeling of non-linear hysteretic dynamic system behavior are discussed. Particular attention is given to (1) the effects of over- and under-parameterization on parameter convergence and system output tracking performance, (2) identifiability in multi-degree-of-freedom structural systems, (3) trade-offs in setting user-defined parameters for adaptive laws, and (4) the effects of noise on measurement integration. Both simulation and experimental results indicating the performance of the parametric and non-parametric methods are presented and their implications are discussed in the context of adaptive structures and structural health monitoring.