EIS and adjunct electrical modeling for material selection by evaluating two mild steels for use in super-alkaline mineral processing

The production of metal concentrates during mineral processing of ferrous and non-ferrous metals involves a variety of highly corrosive chemicals which deteriorate common mild steel as the material of choice in the construction of such lines, through rapid propagation of localized pitting in susceptible parts, often in sensitive areas. This requires unscheduled maintenance and plant shut down. In order to test the corrosion resistance of different available materials as replacement materials, polarization and electrochemical impedance spectroscopy (EIS) tests were carried out. The EIS numerical outputs were then transformed into an equivalent electric circuit using Z-View software, and the predictive behavior was contrasted with actual performance after long-term immersion, depicted through SEM, EDS, XRD and weight change observations. Also, results of pits and cracks, obtained with climax software-enhanced polarization resistance, and reduced capacitance added to much diminished current densities, verified the acceptable performance of CK₄₅ compared with high priced stainless steel substitutes with comparable operational life. Therefore, CK₄₅ can be a suitable alternative in steel constructions which are exposed to super-alkaline and corrosive environments.     

Nonlinear Analysis and Optimum Design of Guyed Masts

In this paper the nonlinear analysis and design optimization of guyed masts is addressed. The mast is modeled as a 3D truss and is supported by catenary cable elements that have nonlinear elastic behavior. For nonlinear static analysis, an innovative procedure is proposed that divides the structure into linear and nonlinear parts and analyzes them separately. The proposed method satisfies the equilibrium and compatibility by establishing and solution of a set of nonlinear equations. The optimization problem employs the sizes of members, initial cable tensions and the positions of anchor on the ground and tie level of cables on the mast as design variables. To facilitate the optimization solution, a compatible sensitivity analysis procedure is proposed. Sensitivities of objective function, displacement and strength constraints in the mast and cables, subjected to a variety of load combinations including dead, wind and ice loads are calculated. Numerical examples are provided to show the nonlinear analysis procedure and the applicability of the algorithm to optimum design of practical guyed masts.     

Oxidative addition of MeI to some cyclometalated organoplatinum(II) complexes: Kinetics and mechanism

New cyclometalated platinum(II) complexes [PtMe(C^N)L], 1, in which C^N = deprotonated 2-phenylpyridine (ppy), benzo[h]quinoline (bhq) or 2-(p-tolyl)pyridine (tpy) and L = PPh₃ or PMePh₂, were synthesized by the reaction of [PtMe(C^N)(SMe₂)] with 1 equiv of L. The reaction of complexes 1 with MeI gave the cyclometalated Pt(IV) complexes [PtMe₂I(C^N)L], 3. On the basis of kinetic studies, using Uv–visible spectroscopy, it was suggested that the latter oxidative addition reactions were proceeded by an S_N2 mechanism. The rates of the reactions at different temperatures were measured and consistent with the proposed mechanism, large negative ΔS³ values were found for each reaction. Besides, rate of reactions (in CHCl₃) involving the PPh₃ complexes [PtMe(C^N)(PPh₃)], were almost 3–5 times slower than those involving the PMePh₂ complexes [PtMe(C^N)(PMePh₂)]. This was attributed to the electronic and steric effects of PPh₃ ligand as compared with that of PMePh₂ ligand which was further confirmed using density functional theory (DFT) calculations through finding approximate structures for the described complexes.     

A neurosteroid analogue photolabeling reagent labels the colchicine-binding site on tubulin: a mass spectrometric analysis

Previous studies have shown that the neurosteroid analogue, 6-Azi-pregnanolone (6-AziP), photolabels voltage-dependent anion channels and proteins of approximately 55 kDa in rat brain membranes. The present study used two-dimensional electrophoresis and nanoelectrospray ionization ion-trap mass spectrometry (nano-ESI-MS) to identify the 55 kDa proteins (isoelectric point 4.8) as isoforms of β-tubulin. This identification was confirmed by immunoblot and immunoprecipitation of photolabeled protein with anti-β-tubulin antibody and by the demonstration that 6-AziP photolabels purified bovine brain tubulin in a concentration-dependent pattern. To identify the photolabeling sites, purified bovine brain tubulin was photolabeled with 6-AziP, digested with trypsin, and analyzed by matrix-assisted laser desorption/ionization MS (MALDI). A 6-AziP adduct of TAVCDIPPR(m/z?= 1287.77), a β-tubulin specific peptide, was detected by MALDI. High-resolution liquid chromatography-MS/MS analysis identified that 6-AziP was covalently bound to cysteine 354 (Cys-354), previously identified as a colchicine-binding site. 6-AziP photolabeling was inhibited by 2-methoxyestradiol, an endogenous derivative of estradiol thought to bind to the colchicine site. Structural modeling predicted that neurosteroids could dock in this colchicine site at the interface between α- and β-tubulin with the photolabeling group of 6-AziP positioned proximate to Cys-354.     

Silicon insulator-based dielectrophoresis devices for minimized heating effects

Concentration of biological specimens that are extremely dilute in a solution is of paramount importance for their detection. Microfluidic chips based on insulator-based DEP (iDEP) have been used to selectively concentrate bacteria and viruses. iDEP biochips are currently fabricated with glass or polymer substrates to allow for high electric fields within the channels. Joule heating is a well-known problem in these substrates and can lead to decreased throughput and even device failure. In this work, we present, for the first time, highly efficient trapping and separation of particles in DC iDEP devices that are fabricated on silicon using a single-etch-step three-dimensional microfabrication process with greatly improved heat dissipation properties. Fabrication in silicon allows for greater heat dissipation for identical geometries and operating conditions. The 3D fabrication allows for higher performance at lower applied potentials. Thermal measurements were performed on both the presented silicon chips and previously published PDMS devices comprised of microposts. Trapping and separation of 1 and 2 μm polystyrene particles was demonstrated. These results demonstrate the feasibility of high-performance silicon iDEP devices for the next generation of sorting and concentration microsystems.     

Synthesis and Characterization of Single-Phase Cubic ZrO2 Spherical Nanocrystals by Decomposition Route

A simple thermal decomposition route has been developed to prepare single-phase cubic ZrO₂ nanospheres by [Zr(sal)₃(H₂O)₂](NO₃) as the new precursor. The ZrO₂ nanocrystals have been prepared by bis-aqua, tris-salicylaldehydato zirconium(IV) nitrate; [Zr(sal)₃(H₂O)₂](NO₃), as precursor in oleylamine (C₁₈H₃₇N) and triphenylphosphine (C₁₈H₁₅P). To control the particle size, combination of C₁₈H₃₇N and C₁₈H₁₅P were applied as surfactants. The C₁₈H₃₇N and C₁₈H₁₅P play an important role in preventing aggregation of ZrO₂ nanocrystals. The products were characterized by X-ray diffraction, transmission electron microscopy, photoluminescence spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy to depict the phase and morphology. The FT-IR spectrum showed the purity of obtained ZrO₂ nanocrystals with cubic phase.     

Synthesis of Monodisperse Lanthanum Hydroxide Nanoparticles and Nanorods by Sonochemical Method

In this work, monodisperse nanoparticles and nanorods of lanthanum hydroxide was synthesized from the reaction of lanthanum(III) nitrate and sodium hydroxide by sonochemical method. The effect of some of the parameters such as feeding rate of precursors, different solvents of reaction, time of sonication, and various surfactants on the particle size and morphology of products was studied. The as-prepared products were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy.     

Peptide peak intensities enhanced by cysteine modifiers and MALDI TOF MS

Two cysteine‐specific modifiers we reported previously, N‐ethyl maleimide (NEM) and iodoacetanilide (IAA), have been applied to the labeling of cysteine residues of peptides for the purpose of examining the enhancement of ionization efficiencies in combination with matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI TOF MS). The peak intensities of the peptides as a result of modification with these modifiers were compared with the peak intensities of peptides modified with a commercially available cysteine‐specific modifier, iodoacetamide (IA). Our experiments show significant enhancement in the peak intensities of three cysteine‐containing synthetic peptides modified with IAA compared to those modified with IA. The results showed a 4.5–6‐fold increase as a result of modification with IAA compared to modification with IA. Furthermore, it was found that IAA modification also significantly enhanced the peak intensities of many peptides of a commercially available proteins, bovine serum albumin (BSA), compared to those modified with IA. This significant enhancement helped identify a greater number of peptides of these proteins, leading to a higher sequence coverage with greater confidence scores in identification of proteins with the use of IAA. Copyright © 2012 John Wiley & Sons, Ltd.     

The interaction of <Superscript>99m</Superscript>Tc with pyrimidine compounds

The reaction of ^99mTc of different oxidation states (+7, +4) with 2-thiouracil and 5-nitrobarbituric acid have been studied at different temperatures, pH and concentrations. The reaction mixtures have been analyzed at different times using thin layer chromatography (TLC) and a radio detector to show the peaks at the plates. ^99mTc is obtained from the Mo generators with oxidation state (+7). The use of SnCl₂ as a reducing agent gave ^99mTc with oxidation state (+4). It is very difficult to separate the complexes formed from the reactions in very small concentration. The percentage of ^99mTc and its oxidation state involved in the complexes can be determined. The labeling efficiencies (percentage of complex) in the reaction of ^99mTc⁺⁷ with 5-nitro-barbituric-acid increases mostly at pH  10. Both oxidation states of ^99mTc(+7, +4) can be detected at pH’s 4 and 10, but at pH  4, the reduced form ^99mTCO₂, is more pronounced. At pH  7 no complexes were detected and most of ^99mTc remains as ^99mTCO₄ ⁻ . By increasing the ligand concentration, the labeling efficiencies of the complex increases. For the reaction of ^99mTc of oxidation states (+4, +7) with 2-thiouracil at different temperatures and analytical times it is concluded that several complexes with different R_f values were observed in equilibrium and most of these complexes were unstable.