Tumor cell detection method using complement-mediated cytolytic reaction and imaging sensor system

A novel tumor-detection system consisting of complementmediated cytolytic reaction and an image processing system was developed for the simple and rapid determination of tumor cells. The present system consists of a CCD image sensor, image memory board, personal computer, and microscope. When monoclonal antibody 3C4, which is specific to the guinea pig hepatoma L-10, was added to cell suspension, only L-10 cytolysis occurred. Cytolysis caused a decrease in brightness of the cells observed by phase-contrast microscopy. The phase contrast image of the cells before cytolysis was converted to a digitalized signal and stored in computer memory. After cytolysis, a brightness threshold above that of lysed cells was subtracted from the digitalized signal and compared to the signal stored before reaction. L-10 cells in mixed cell suspension were determined specifically by the system. Measurement time was only 2 sec and overall time, including reaction time, was approximately 30 min. Since this method does not require a cell washing process, automation of the whole system is possible.     

L-histidine decarboxylase as a probe in studies on histamine

Because the Falck-Hillarp formaldehyde fluorescence method, which was superbly applied to identify catecholaminergic and serotonergic neurons, is not applicable to histamine, the first author (T.W.) developed an antibody to L-histidine decarboxylase (HDC) for identification of the histaminergic neuron system in the brain. The anti-HDC antibody was of great use for mapping the location and distribution of this histaminergic neuron system. (S)-alpha-fluoromethylhistidine, a specific and potent irreversible inhibitor of HDC, was also very useful in studies on functions of the neuron system. The activity of HDC is increased by various agents, treatments, and physiological conditions. We found new compounds that increased HDC activity (i.e., tetradecanoylphobol acetate (TPA), other tumor promoters, and staphylococcal enterotoxin A); and using mast cell-deficient mutant (W/W(v)) mice, we obtained evidence that this increase occurred in macrophages. To further characterize the mechanism of increases in HDC activity, the second author (H.O.) cloned human HDC cDNA and a human HDC gene. In studies on the regulation mechanism of the HDC gene, which is expressed only in limited types of cells such as mast cells, enterochromaffin-like cells in the stomach, cells in the tuberomammillary nucleus of the brain, and macrophages, CpG islands in the promoter region of the HDC gene were found to be demethylated in cells expressing the gene, whereas they are methylated in other cells that do not express the HDC gene. In collaboration with many other researchers, we developed HDC knockout mice. The resulting research is producing a lot of interesting findings in our laboratory as well as in others. In summary, HDC has been and will be useful in studies on functions of histamine.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Electronic structural changes between nickel(II)-semiquinonato and nickel(III)-catecholato states driven by chemical and physical perturbation

The selective synthesis of tetracoordinate square-planar low-spin nickel(II)-semiquinonato (Ni(II)-SQ) and nickel(III)-catecholato (Ni(III)-Cat) complexes, 1 and 2, respectively, was achieved by using bidentate ligands with modulated nitrogen-donor ability to the nickel ion. The electronic structures of 1 and 2 were revealed by XPS and EPR measurements. The absorption spectra of 1 and 2 in a noncoordinating solvent, dichloromethane (CH2Cl2), are completely different from those in tetrahydrofuran (THF), being a coordinating solvent. As expected from this result, the gradual addition of N,N-dimethylformamide (DMF), which is also a coordinating solvent like THF, into a solution of 1 or 2 in CH2Cl2 leads to color changes from blue (for 1) and brown (for 2) to light green, which is the same color observed for solutions of 1 or 2 in THF. Furthermore, the same color changes are induced by varying the temperature. Such spectral changes are attributable to the transformation from square-planar low-spin Ni(II)-SQ and Ni(III)-Cat complexes to octahedral high-spin Ni(II)-SQ ones, caused by the coordination of two solvent molecules to the nickel ion.     

Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions

In a nickel titration of cyanide ions using murexide as indicator, an accurate equivalence point was determined by a non-linear least-squares curve-fitting for a titration curve. This method was developed to establish a standard solution for cyanide ions. In a curve-fitting procedure, a theoretical titration curve was calculated, assuming that nickel ion formed only a 1:4 Ni²⁺:CN⁻ complex with cyanide ions and formed only a 1:1 complex with murexide. Results of the curve-fitting were reasonable at any pH and any indicator concentration studied. The combined standard uncertainty for a concentration of a 1000 mg kg⁻¹ cyanide solution by this method was 0.079%.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Homojunction-structured ZnO light-emitting diodes fabricated by dressed-photon assisted annealing

We formed a p?Cn homojunction by implanting nitrogen ions, serving as a p-type dopant, into an n-type ZnO crystal. A forward bias current was injected into the crystal while irradiating it with light, bringing about Joule heating which annealed the crystal and changed the spatial distribution of the N-dopant concentration. This activated the N-dopant, causing its concentration distribution to be modified in a self-organized manner so as to be suitable for generating dressed photons. A light-emitting diode fabricated by this dressed-photon assisted annealing method showed electroluminescence at room temperature. In a device fabricated by annealing under irradiation with 407 nm-wavelength light, at a forward bias current of 20 mA, the peak wavelength of the electroluminescence was 436 nm, the optical output power was 6.2 ??W, and the external quantum efficiency was 1.1×10^?4. The emission spectral profile depended on transitions from intermediate phonon states.