Observation of vacuum-ultraviolet Ar2* radiation gain at 126 nm produced by an ultrashort high-intensity laser pulse propagating in a hollow fiber

We observed a small-signal gain of Ar2* emission at 126 nm by use of a hollow fiber to guide the high-intensity laser propagation in high-pressure Ar. The small-signal gain coefficient was measured to be 0.05 cm(-1) at 126 nm. Kinetic analysis revealed that the electrons produced by the high-intensity laser through an optical-field-induced ionization process initiated the Ar2* production processes. The increase in the emission intensity was measured to be exp(2.5), with an increase in the fiber length.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Full-parallax three-dimensional display based on light field reproduction

Optical Review - Light field displays can display three-dimensional (3D) images with smooth motion parallax without the use of special glasses, by reproducing light ray information from objects....     

Quantum Mutual Entropy Defined by Liftings

A lifting is a map from the state of a system to that of a compound system, which was introduced in Accardi and Ohya (Appl. Math. Optim. 39:33–59, 1999). The lifting can be applied to various physical processes.     

Applicability of classical optical fiber theories to holey fibers

We discuss the applicability of well-established classical optical fiber theories to holey fibers. By appropriately defining the V parameter, we can easily estimate the fundamental properties of holey fibers, such as effective index, group-velocity dispersion, mode field diameter, beam divergence, and splice loss, through simple empirical expressions without the need for heavy numerical computations. We confirm the validity of the V parameter defined here by comparing the calculated results with the earlier experimental and numerical results.     

Mössbauer study of the transition metal phosphorus trichalcogenide FePS3 and spin glass Mn0.5Fe0.5PS3

The transition metal phosphorus trichalcogenides MnPS₃ and the FePS₃ are CdCl₂ type layered compounds, where the transition metal ions form a hexagonal lattice. While these compounds order anti-ferromagnetically at low temperature, the magnetic structures are different. We have reported that these mixtures Mn_0.5Fe_0.5PS₃ is a spin glass with a glass transition temperature T _g=33.7 K. Then, in this work, we report that the results of the temperature variation of the ⁵⁷Fe Mössbauer spectra of FePS₃ and Mn_0.5Fe_0.5PS₃, in detail. In the anti-ferromagnetic state of FePS₃, the hyperfine magnetic field H _int increases with decreasing temperature and the Isomer shift I. S. increases slightly with decreasing temperature. However in Mn_0.5Fe_0.5PS₃, the two broadened peaks are observed and the two peaks became a single peak with decreasing temperature at about 50.0 K, which is higher than T _g=33.7 K. In the spin glass Mn_0.5Fe_0.5PS₃, the Mössbauer spectra suggest that the magnetic interactions exist far above T _g.     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

Escape process and stochastic resonance under noise intensity fluctuation

We study the effects of noise intensity fluctuations on the stationary and dynamical properties of an overdamped Langevin model with a bistable potential and external periodical driving force. We calculated the stationary distributions, mean-first passage time (MFPT) and the spectral amplification factor using a complete set expansion (CSE) technique. We found resonant activation (RA) and stochastic resonance (SR) phenomena in the system under investigation. Moreover, the strength of RA and SR phenomena exhibit non-monotonic behavior and their trade-off relation as a function of the squared variation coefficient of the noise intensity process. The reliability of CSE is verified with Monte Carlo simulations.     

Volume perception from motion

Volume perception, that is, perception of a partially enclosed space filled with a medium, can be assessed not only from binocular viewing but also from motion. We studied the volume perception of a cylindrical object in motion. The motion (rotation, translation, or rolling) of the cylindrical object was simulated with and without appearing and disappearing parts (ADPs). We found that volume perception could be assessed easily with ADPs but was difficult without ADPs. These experimental results indicate that ADPs are an essential factor for volume perception from motion, which is correspond to binocularly unpaired regions for volume perception in binocular viewing.     

Development of ultra-short pulse VUV laser system for nanoscale processing

We have developed intense vacuum ultraviolet (VUV) radiation sources for advanced material processing, such as photochemical surface reactions and precise processing on a nanometer scale. We have constructed a new VUV laser system to generate sub-picosecond pulses at the wavelength of 126 nm. A seed VUV pulse was generated in Xe as the 7th harmonic of a 882-nm Ti:sapphire laser. The optimum conversion was achieved at the pressure of 1.2 Torr. The seed pulse will be amplified by the Ar₂^*\mathrm{Ar}_{2}^{*} media generated by an optical-field-induced ionization Ar plasma produced by the Ti:sapphire laser. We have obtained a gain coefficient of g=0.16 cm⁻¹. Our developing system will provide VUV ultra-short pulses with sub-μJ energy at a repetition rate of 1 kHz.