Chemiluminescent determination of vanadium in steel

Summary A chemiluminescent method for the determination of vanadium in steel with cinchomeronic hydrazide as analytical reagent is proposed. The optimum conditions are pH 11.75 (phosphate buffer), 1.0×10^–3 mol/l cinchomeronic hydrazide, 6.6×10^–3 mol/l hydrogen peroxide and 2.8×10^–3 mol/l V(IV). The maximum chemiluminescent emission is obtained at 420 nm. A linear relationship exists in the range of 0.04–1.00 g/ml of V(IV) with a 3.6% variation coefficient at 0.50 g/ml of V(IV) level for ten replicates. Cobalt(II), copper(II) and chromium(VI) show strong interference and a chloroform extraction procedure with -benzo-inoxime is recommended to avoid these interferences. This method has been applied to determine vanadium in a certified steel with excellent results.Presented at Euroanalysis VII     

Combining thermal analysis with other techniques to monitor the decomposition of poly(m-phenylene isophthalamide)

The pyrolysis behaviour of Nomex, poly(m-phenylene isophthalamide) fibres under argon has been investigated up to a temperature of 1173 K with different methods to get direct information on the progressive changes taking place in the solid material and its carbon fibre residues. The main stages of the pyrolytic degradation of the fibres were determined by thermal analysis (TG and DTA) and their chemical and morphological evolution through the different steps was subsequently followed by Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) measurements, respectively, on samples treated to various temperatures. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

All-solid-state potentiometric sensors sensitive to nonionic surfactants based on ionophores containing ethoxylate units

Earlier work of potentiometric Ion-selective electrodes (ISEs) sensitive to nonionic surfactants of the polyethoxylate type is further extended. The ISEs constructed were all-solid-state sensors with plasticized PVC membranes. The sensing material was a tetraphenylborate salt of the barium complex with a polyethoxylate nonionic surfactant. As membrane component, the combinations of two polyethoxylates of the nonylphenoxy type, which differed in the number of oxyethylene units (5 or 12), and two different plasticizers, (o-nitrophenyloctyl ether and o-nitrophenylphenyl ether), were tested. The response of these electrodes to different nonionic surfactants and the interference effect of several species has been evaluated. For all the types of tested electrodes, the sensitivities shown were ca. 30.0 mV dec(-1) and the limit of detection, ca. 10(-5) M, when a nonylphenoxyde with 12 oxyethylene units was used as standard. The membrane with the best response characteristics was then applied in potentiometric titrations of this kind of surfactants in the presence of Ba(2+) ion and using tetraphenylborate as the titrant.     

Synthesis of S,N-chelating heterocyclic thionates of palladium(II). Crystal structure of cis-[Pd(pym2S)(PPh3)2] (pym2S = pyrimidine-2-thionate)

The synthesis of mononuclear palladium(II) complexes containing chelating heterocyclic thionates is described. The new compounds of general formula cis-[Pd(RS-N)(L) _x ](ClO₄) [x = 2, L = PPh₃, RS-N = pyridine-2-thionate (py2S) (1), pyrimidine-2-thionate (pym2S) (2), imidazolidine-2-thionate (imzdS) (3), 1-methylimidazoline-2 thionate (mimzS) (4), 1,3-thiazoline-2-thionate (tzdS) (5); x = 1, L = dppe, RS-N = pyridine-2-thionate (py2S) (6), pyrimidine-2-thionate (pym2S) (7), imidazolidine-2-thionate (imzdS) (8), 1-methylimidazole-2 thionate (mimzS) (9) and 1,3-thiazoline-2-thionate (tzdS) (10)] were prepared by directly reacting the hydroxo-complexes [{Pd(PPh₃)₂(-OH) }₂](ClO₄)₂ and [ {Pd(dppe)(-OH) }₂](ClO₄)₂ with the corresponding heterocyclic thiones (RS-N)H. The complexes have been characterized by partial elemental analyses, conductance measurements and spectroscopic methods (I.r., FAB, ¹H- and ³¹P-n.m.r.). No evidence for monomer-dimer equilibrium was found in solution. The crystal structure of (2) has been determined by X-ray diffraction analysis.     

Short synthesis of the CDEF ring system of lactonamycin

[reaction: see text]. A synthesis of the CDEF fragment of lactonamycin is achieved in eight steps (six pots) from the known and readily available anhydride 4 via a Diels-Alder reaction between tricycle 13 and 2,3-dimethylbenzoquinone.     

Influence of oxidising agents in lead determination by hydride generation direct flame atomic absorption spectroscopy

Summary The influence of Cr₂O₇ ^2–, MnO₄ ^–, Ce⁴⁺, H₂O₂ and S₂O₈ ^2– as oxidising agents in lead determination as volatile covalent hydride using NaBH₄ is reported in this paper.The reaction conditions for every oxidising agents (pH, quantity and concentration of the oxidising agent, quantity and concentration of the NaBH₄ and reaction time) are optimized, determining sensitivity and detection limit by measuring the peak height.The recovery of lead from solution has been measured by flameless atomic absorption spectroscopy.A linear relationship the logarithm of absorbance values and the redox potential of the system is obtained with a correlation coefficient of 0.999. The results and their interpretation are given in this paper.

---

Der Einflu oxidierender Reagentien auf die Bleibestimmung mittels Flammenatomabsorptionsspektrometrie nach Hydridbildung

Zusammenfassung Es wird über den Einfluß der Oxidantien Cr₂O₇, MnO₄ ^–, Ce⁴⁺, H₂O₂ und S₂O₈ ^{2 –} auf die Bleibestimmung als kovalentes Hydrid berichtet. Für jede oxidierende Substanz werden die Reaktionsbedingungen optimiert (pH, Menge und Konzentration des Oxidans, Menge und Konzentration von NaBH₄ und Reaktionszeit), um Empfindlichkeit und Nachweisgrenze durch Peakhöhenauswertung zu bestimmen.Die Wiederfindungsrate wurde durch elektrothermale Atomabsorptionsspektrometrie von Blei in der Lösung bestimmt.Der Zusammenhang zwischen dem Logarithmus der Extinktion und dem Redoxpotential des Oxidans ergibt eine lineare Beziehung mit einem Korrelationskoeffizienten von 0.999. Die Ergebnisse und deren Interpretation werden in dieser Arbeit beschrieben.

---

---

Paper presented to Euroanalysis V. Cracow, August 1984.     

A comparative study of the correction of systematic errors in the quantitation of pyrethroids in vegetables using calibration curves prepared using standards in pure solvent

A comparative study of two mathematical approaches was performed in order to correct systematic errors due to the presence of the unexpected interferences which appear when the quantitation of the analyte in real samples is carried out with calibration curves built using standards in pure solvent. These methods consisted in the establishment of different mathematical expressions which transform the concentration (Cs) obtained using calibration graphs built using pure solvent into the corrected concentration (C(M)) that should be obtained if the quantitation is carried out with calibration curves built using standards dissolved in blank matrix extracts. In the two approaches the correction is performed from the results of an intermediate precision study which was carried out using both calibration graphs (prepared using pure solvent and blank matrix extract). By using ANCOVA to compare the slope of both solvent-based and matrix-matched calibration graphs, matrix effect was found in the determination of deltamethrin in tomato and acrinathrin in tomato and pepper. In these cases, both approaches led to good results.