Calibration and applications of the ΔMP2 method for calculating core electron binding energies

We calibrated a method for the evaluation of core electron binding energies, based on the energy differences between the cation and neutral molecule evaluated at the level of M?ller-Plesset perturbation theory. The central feature of the method is the use of a mixed basis set: a large all-electron basis set is used for the atom whose core electron is removed, while the model core potential basis set is employed for all remaining atoms. Calibration was carried out for 55 molecules and 114 binding energies of 1s core electrons for the atoms C, N, O, and F. The average absolute deviation for all the core electron binding energies is 0.163 eV. The method was applied to the calculation of the core electron binding energies of five nucleic acid bases (uracil, adenine, cytosine, guanine, and thymine) and several of their low-energy tautomers.     

Cellulose‐based graft copolymers with controlled architecture prepared in a homogeneous phase

Cellulose‐based macroinitiators with predetermined number of initiation sites were synthesized by acylation of microcrystalline cellulose AVICEL PH‐101 with 2‐bromoisobutyryl bromide under homogeneous reaction conditions in the N,N‐dimethylacetamide/LiCl solvent system. The influence of different methods of cellulose activation on acylation efficiency and reproducibility was investigated. Best results were obtained using thermal activation under reduced pressure or the newly introduced protocol based on solvent exchange to 1,4‐dioxane. Prepared macroinitiators were used for grafting with styrene and methyl methacrylate (MMA) using optimized atom transfer radical polymerization reaction conditions to achieve well‐controlled polymerizations with high initiation efficiency. For MMA grafting, the initiation efficiency was shown to be dependent on certain reaction conditions, such as type of solvent, monomer concentration, or the presence of a sacrificial initiator. In addition, single‐electron transfer living radical polymerization with Cu(0) as the catalyst was used for the first time to prepare cellulose‐graft‐polystyrene and cellulose‐graft‐poly(MMA) copolymers in a homogeneous phase. In summary, homogeneous reaction conditions, stoichiometric control in the preparation of macroinitiators, and controlled grafting jointly allowed for an extensive control of copolymers architecture, that is, density of grafting, composition, and molecular parameters of grafts. Moreover, some of the prepared copolymers were characterized by static and dynamic light scattering and microscopic techniques (transmission electron microscopy and atomic force microscopy). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Change of the favored routes of EI MS fragmentation when proceeding from N1, N1‐dimethyl‐N2‐arylformamidines to 1,1,3,3‐tetraalkyl‐2‐arylguanidines: substituent effects

Although series of N¹, N¹‐dimethyl‐N²‐arylformamidines and of 1,1,3,3‐tetraalkyl‐2‐arylguanidines are structurally analogous and similar electron‐ionization mass spectral fragmentation may be expected, they display important differences in the favored routes of fragmentation and consequently in substituent effects on ion abundances. In the case of formamidines, the cyclization‐elimination process (initiated by nucleophilic attack of the N‐amino atom on the 2‐position of the phenyl ring) and formation of the cyclic benzimidazolium [M‐H]⁺ ions dominates, whereas the loss of the NR₂ group is more favored for guanidines. In order to gain information on the most probable structures of the principal fragments, quantum‐chemical calculations were performed on a selected set. A good linear relation between log{I[M‐H]⁺I [M]^+?} and σ_R⁺ constants of substituent at para position in the phenyl ring occurs solely for formamidines (r = 0.989). In the case of guanidines, this relation is not significant (r = 0.659). A good linear relation is found between log{I[M‐NMe₂]⁺/I [M]^+?} and σ_p⁺ constants (r = 0.993). Copyright © 2010 John Wiley & Sons, Ltd.     

Sterically Less‐Hindered Half‐Titanocene(IV) Phenoxides: Ancillary‐Ligand Effect on Mono‐, Bis‐, and Tris(2‐Alkyl‐/arylphenoxy) Titanium(IV) Chloride Complexes

A series of mono‐, bis‐, and tris(phenoxy)–titanium(IV) chlorides of the type [Cp*Ti(2‐R? PhO)_nCl_3?n] (n=1–3; Cp*=pentamethylcyclopentadienyl) was prepared, in which R=Me, iPr, tBu, and Ph. The formation of each mono‐, bis‐, and tris(2‐alkyl‐/arylphenoxy) series was authenticated by structural studies on representative examples of the phenyl series including [Cp*Ti(2‐Ph? PhO)Cl₂] ( 1 PhCl2 ), [Cp*Ti(2‐Ph? PhO)₂Cl] ( 2 PhCl ), and [Cp*Ti(2‐Ph? PhO)₃] ( 3 Ph ). The metal‐coordination geometry of each compound is best described as pseudotetrahedral with the Cp* ring and the 2‐Ph? PhO and chloride ligands occupying three leg positions in a piano‐stool geometry. The mean Ti? O distances, observed with an increasing number of 2‐Ph? PhO groups, are 1.784(3), 1.802(4), and 1.799(3) Å for 1 PhCl2 , 2 PhCl , and 3 Ph , respectively. All four alkyl/aryl series with Me, iPr, tBu, and Ph substituents were tested for ethylene homopolymerization after activation with Ph₃C⁺[B(C₆F₅)₄]^? and modified methyaluminoxane (7% aluminum in isopar E; mMAO‐7) at 140 °C. The phenyl series showed much higher catalytic activity, which ranged from 43.2 and 65.4 kg (mmol of Ti?h)^?1, than the Me, iPr, and tBu series (19.2 and 36.6 kg (mmol of Ti?h)^?1). Among the phenyl series, the bis(phenoxide) complex of 2 PhCl showed the highest activity of 65.4 kg (mmol of Ti?h)^?1. Therefore, the catalyst precursors of the phenyl series were examined by treating them with a variety of alkylating reagents, such as trimethylaluminum (TMA), triisobutylaluminum (TIBA), and methylaluminoxane (MAO). In all cases, 2 PhCl produced the most catalytically active alkylated species, [Cp*Ti(2‐Ph? PhO)MeCl]. This enhancement was further supported by DFT calculations based on the simplified model with TMA.     

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

A mechanistic study on the fragmentation of peptide‐derived Amadori products

Gas phase fragmentation of peptide‐derived Amadori products was investigated using synthetic compounds regioselectively deuterated as well as labeled with ¹⁸O at aminofructose moiety. The eliminated molecule CH₂O contains exclusively protons attached to carbon C6 of the aminofructose moiety. The hydrogen atoms connected with the carbon C1 of the aminofructose moiety are partially eliminated as a component of water molecules during the dehydration process and partially dislocated within the fragmented peptide molecule. The labeled oxygen atom attached to the carbon C2 is eliminated in 100% along with the first loss of water. The MS³ experiments revealed that the product ion formed by triple dehydration of the Amadori product does not eliminate the formaldehyde molecule. On the basis of these observations we proposed a hypothetical mechanism of Amadori products' fragmentation. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermogravimetric analysis of thermal stability of poly(methyl methacrylate) films modified with photoinitiators

Films of poly (methyl methacrylate) (PMMA) were prepared by the addition of photoinitiator to the polymer. The influence of five organic photoinitiators on thermal stability of poly(methyl methacrylate) was studied by thermogravimetric analysis. Next, the PMMA films doped with these photoinitiators were UV irradiated and investigated in terms of changes in their thermal stability. It was found that the photoinitiators had accelerated thermal degradation of non-irradiated PMMA films due to the action of free radicals coming from the additives’ thermolysis. For UV-irradiated specimens, the effect of photoinitiator on PMMA thermal stability depended on the chemical structure of organic compound modifying the polymer. In general, thermal stability of irradiated samples was higher in the presence of additives. Thermal destruction of modified PMMA can be explained by the formation of resonance structures in aromatic photoinitiators and consumption of energy in dissipation processes.     

Lead Film Electrode Prepared with the Use of a Reversibly Deposited Mediator Metal in Adsorptive Stripping Voltammetry of Nickel

The paper presents the first report on application of a “hybrid” lead film electrode for the adsorptive stripping voltammetric determination of Ni(II) in the presence of nioxime as a complexing agent. The strategy to create a “hybrid” electrode is based on the combination of ex situ and in situ plating methods and the use of a reversibly deposited mediator metal (Zn) for the lead film formation. The surface morphology of a new sensor was characterized by atomic force microscopy. The detection limit for Ni(II) obtained at 120 s of accumulation time was 3.9×10^?11 mol L^?1. The proposed method was validated for the determination of nickel in water certified reference materials with good results.     

Vibrational Quenching in Near-Infrared Emitting Lanthanide Complexes: A Quantitative Experimental Study and Novel Insights

Two series of novel NIR-emissive complexes of Nd³⁺, Sm³⁺, Er³⁺ and Yb³⁺ with two different β-diketonate ligands (L₁=4,4,4-trifluoro-1-phenyl-1,3-butadione and L₂=4,4,4-trifluoro-1-(4-chlorophenyl)-1,3-butadione) are reported. The neutral triphenylphosphine oxide (tppo) ligand was used to replace coordinated water molecules in the first coordination sphere of the as-obtained [Ln(L₁₍₂₎)₃(H₂O)₂] complexes to afford water-free [Ln(L₁₍₂₎)₃(tppo)₂] molecular species. Upon replacement of water molecules by tppo units, the NIR emission lifetimes of the Nd³⁺, Er³⁺and Sm³⁺complexes increase by about one order of magnitude up to values of ≈9, 8 and 113 ms while Yb³⁺ complexes reach intrinsic quantum yields as high as to Φ_Yb=6.5 %., which are remarkably high for fully hydrogenated complexes. Vibrational quenching by CH and OH oscillators has been quantitatively assessed by implementing the Förster's model of resonance energy transfer on the basis of experimental data. This study demonstrates that highly efficient NIR-emitting lanthanide complexes can be obtained with facile, cheap and accessible syntheses through a rational design.