Upper limits on gravitational-wave emission in association with the 27 Dec 2004 giant flare of SGR1806-20

At the time when the giant flare of SGR1806-20 occurred, the AURIGA "bar" gravitational-wave (GW) detector was on the air with a noise performance close to stationary Gaussian. This allows us to set relevant upper limits, at a number of frequencies in the vicinities of 900 Hz, on the amplitude of the damped GW wave trains, which, according to current models, could have been emitted, due to the excitation of normal modes of the star associated with the peak in x-ray luminosity.     

All-optical transistor action with bistable switching in a photonic crystal cross-waveguide geometry

We demonstrate all-optical switching action in a nonlinear photonic crystal cross-waveguide geometry with instantaneous Kerr nonlinearity, in which the transmission of a signal can be reversibly switched on and off by a control input. Our geometry accomplishes both spatial and spectral separation between the signal and the control in the nonlinear regime. The device occupies a small footprint of a few micrometers squared and requires only a few milliwatts of power at a 10-Gbit/s switching rate by use of Kerr nonlinearity in AlGaAs below half the electronic bandgap. We also show that the switching dynamics, as revealed by both coupled-mode theory and finite-difference time domain simulations, exhibits collective behavior that can be exploited to generate high-contrast logic levels and all-optical memory.     

Optical bistability in axially modulated OmniGuide fibers

We demonstrate the feasibility of optical bistability in an axially modulated nonlinear OmniGuide fiber through analytical theory and detailed numerical experiments. At 1.55-microm carrier wavelength, the in-fiber devices that we propose can operate with only a few tens of milliwatts of power, can have a nearly instantaneous response and recovery time, and can be shorter than 100 microm.     

Stochastic resonance in vertical cavity surface emitting lasers

We report a detailed experimental investigation of stochastic resonance (SR) in the polarized emission of a pump-modulated vertical cavity surface emitting laser. We characterize SR in the time and frequency domains, with a quantitative agreement with existing theories. We further report a statistical analysis of SR in terms of residence-time probability distributions exhibiting alternative features which are fully explained here. By using an accurate choice of the indicator, we are also able to give clear evidence of bona fide resonance.     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

Asbestos Particle Characteristics Important for the Filter Cake Formation

Two types of asbestos fiber, chrysotile and amosite, form filter cakes of different permeabilities while having a similar degree of dispersion. The filter cake resistance depends on the disperse phase characteristics and the conditions of cake formation. The main reason for the effects mentioned is different particle flexibility influenced by the specific structure of each type of asbestos particle. The flexible chrysotile fibers in the cake form dense and rigid, amosite, porous deposits. An increase in the velocity of the suspended chrysotile particles, caused by pressure difference and agitation, results in significant differences in filter cake resistance.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

Buckwheat Identification by Combined UV-VIS-NIR Spectroscopy and Multivariate Analysis

Journal of Applied Spectroscopy - The application of UV-VIS-NIR spectroscopy combined with multivariate analysis for the classification and identification of buckwheat groats was analyzed. Samples...     

Antibacterial effects of the essential oils of commonly consumed medicinal herbs using an in vitro model

The chemical composition and antibacterial activity of essential oils from 10 commonly consumed herbs: Citrus aurantium, C. limon, Lavandula angustifolia, Matricaria chamomilla, Mentha piperita, M. spicata, Ocimum basilicum, Origanum vulgare, Thymus vulgaris and Salvia officinalis have been determined. The antibacterial activity of these oils and their main components; i.e. camphor, carvacrol, 1,8-cineole, linalool, linalyl acetate, limonene, menthol, a-pinene, b-pinene, and thymol were assayed against the human pathogenic bacteria Bacillus subtilis, Enterobacter cloacae, Escherichia coli O157:H7, Micrococcus flavus, Proteus mirabilis, Pseudomonas aeruginosa, Salmonella enteritidis, S. epidermidis, S. typhimurium, and Staphylococcus aureus. The highest and broadest activity was shown by O. vulgare oil. Carvacrol had the highest antibacterial activity among the tested components.