An automated irradiation device for use in cyclotrons

Two cyclotrons are being operated at IPEN-CNEN/SP: one model CV-28, capable of accelerating protons with energies up to 24 MeV and beam currents up to 30 mA, and three other particles; the other one, model Cyclone 30, accelerates protons with energy of 30 MeV and currents up to 350 mA. Both have the objective of irradiating targets both for radioisotope production for use in nuclear medicine and general research. The development of irradiating systems completely automatized was the objective of this work, always aiming to reduce the radiation exposition dose to the workers and to increase the reliability of use of these systems.     

Novel manganese (III) porphyrin containing peripheral “[RuCl(dppb)(X-bipy)]” cations [dppb = 1,4-bis(diphenylphosphino)butane and X = –CH3, –OMe, –Cl]. X-ray structure of the cis-[RuCl(dppb)(bipy)(4-Mepy)]PF6 complex

New tetraruthenated manganese (III) porphyrins were synthesized and characterized (³¹P NMR, cyclic voltammetry, UV–Vis). This new system presents four units of cationic “[RuCl(dppb)(X-bipy)]⁺”. The electrochemical and catalytic properties of the central manganese (III) show dependence on the characteristics of the peripheral ruthenium complexes as evidenced by the Mn^(III)/Mn^(II) reduction potential.     

In situ ion beam sputter deposition and X‐ray photoelectron spectroscopy (XPS) of multiple thin layers under computer control for combinatorial materials synthesis

Deposition of ultra‐thin layers under computer control is a frequent requirement in studies of novel sensors, materials screening, heterogeneous catalysis, the probing of band offsets near semiconductor junctions and many other applications. Often large‐area samples are produced by magnetron sputtering from multiple targets or by atomic layer deposition (ALD). Samples can then be transferred to an analytical chamber for checking by X‐ray photoelectron spectroscopy (XPS) or other surface‐sensitive spectroscopies. The ‘wafer‐scale’ nature of these tools is often greater than is required in combinatorial studies, where a few square centimetres or even millimetres of sample is sufficient for each composition to be tested. The large size leads to increased capital cost, problems of registration as samples are transferred between deposition and analysis, and often makes the use of precious metals as sputter targets prohibitively expensive. Instead we have modified a commercial sample block designed to perform angle‐resolved XPS in a commercial XPS instrument. This now allows ion‐beam sputter deposition from up to six different targets under complete computer control. Ion beam deposition is an attractive technology for depositing ultra‐thin layers of great purity under ultra‐high vacuum conditions, but is generally a very expensive technology. Our new sample block allows ion beam sputtering using the ion gun normally used for sputter depth‐profiling of samples, greatly reducing the cost and allowing deposition to be done (and checked by XPS) in situ in a single instrument. Precious metals are deposited cheaply and efficiently by ion‐beam sputtering from thin metal foils. Samples can then be removed, studied and exposed to reactants or surface treatments before being returned to the XPS to examine and quantify the effects. Copyright © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

Elucidation of triacylglycerols in cod liver oil by liquid chromatography electrospray tandem ion-trap mass spectrometry

Though liquid chromatography electrospray tandem mass spectrometry (LC-ESI-MS²) has been widely used in the structural elucidation of triacylglycerols (TAG) in vegetable oils, its potentiality for the identification of TAG molecules in omega-3 rich oils remains unexplored till date. Hence, this article investigates the applicability of LC-ESI-MS² for the structural characterization of naturally occurring TAG in cod liver oil without the TAG fractionation during the sample preparation. A computational algorithm was developed to automatically interpret the mass spectra and elucidate the TAG structures respectively. The results were compared against the lipase benchmark method. A principal component analysis study revealed that it is possible to discriminate genuine from adulterated cod liver oil.     

Ethylbenzene to chemicals: Catalytic conversion of ethylbenzene into styrene over metal-containing MCM-41

Isomorphously substituted (MeDM) and impregnated metal-containing MCM-41 (MeO_x/IM) catalysts, in which Me = Co, Cu, Cr, Fe or Ni, have been prepared. Structural and textural characterizations of the catalysts were performed by means of X-ray diffraction (XRD), chemical analysis, Raman spectroscopy, electron paramagnetic resonance (EPR), N₂ adsorption isotherms and temperature programmed reduction (TPR). Cu²⁺, Co²⁺, and Cr⁴⁺/Cr³⁺ species were found over the catalysts as cations incorporated in the MCM-41 structure (MeDM) or highly dispersed oxides on the surface (MeO_x/IM). The MeDM catalysts exhibited a good performance in the dehydrogenation of ethylbenzene with CO₂. However, MeO_x/IM catalysts had a low performance in styrene production (activity less than 15 × 10^?3 mmol h^?1 and selectivity for styrene less than 80%) due to the high reducibility of the metals species. However, Ni²⁺ or Fe³⁺ coordinated with the MCM-41 framework, as well as NiO_x and Fe₂O₃ extra-framework species, is continuously oxidized by the CO₂ to maintain the active sites for dehydrogenating ethylbenzene. Deactivation studies on the FeDM sample showed that Fe³⁺ species produced active sp² carbon compounds, which are removed by CO₂; the referred sample is catalytically selective for styrene and stable over 24 h of reaction. In contrast, highly active Ni²⁺ and Ni⁰ species produced a large amount of polyaromatic carbonaceous deposits from styrene, as identified by TPO, TG and Raman spectroscopy. An acid–base mechanism is proposed to operate to adsorb ethylbenzene and abstract the β-hydrogen. CO₂ plays a role in furnishing the lattice oxygen to maintain the Fe³⁺ active sites in the dehydrogenation of ethylbenzene to form styrene.     

Role of thermodynamics in the shape transformation of embedded metal nanoparticles induced by swift heavy-ion irradiation

Swift heavy-ion irradiation of elemental metal nanoparticles (NPs) embedded in amorphous SiO(2) induces a spherical to rodlike shape transformation with the direction of NP elongation aligned to that of the incident ion. Large, once-spherical NPs become progressively more rodlike while small NPs below a critical diameter do not elongate but dissolve in the matrix. We examine this shape transformation for ten metals under a common irradiation condition to achieve mechanistic insight into the transformation process. Subtle differences are apparent including the saturation of the elongated NP width at a minimum sustainable, metal-specific value. Elongated NPs of lesser width are unstable and subject to vaporization. Furthermore, we demonstrate the elongation process is governed by the formation of a molten ion-track in amorphous SiO(2) such that upon saturation the elongated NP width never exceeds the molten ion-track diameter.     

Non‐Invasive Salivary Electrochemical Quantification of Paraquat Poisoning Using Boron Doped Diamond Electrode

The present work describes the first electrochemical method for quantifying paraquat herbicide poisoning in human saliva samples. Paraquat shows two couples of well‐defined peaks in aqueous solution using a boron doped diamond (BDD) electrode. By using square wave voltammetry (SWV) technique under optimum experimental conditions, a linear analytical curve was obtained for paraquat concentrations ranging from 0.800 to 167 µmol L^?1, with a detection limit of 70 nmol L^?1. This method was applied to quantify paraquat spikes in human saliva samples and in two different water samples (tap and river). The recovery values obtained ranged from 83.0 to 104 % and 99.1 to 105 %, respectively, which highlight the accuracy of the proposed method.     

Multivariate analysis of extremely large ToFSIMS imaging datasets by a rapid PCA method

Principal component analysis (PCA) and other multivariate analysis methods have been used increasingly to analyse and understand depth profiles in X‐ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and secondary ion mass spectrometry (SIMS). These methods have proved equally useful in fundamental studies as in applied work where speed of interpretation is very valuable. Until now these methods have been difficult to apply to very large datasets such as spectra associated with 2D images or 3D depth‐profiles. Existing algorithms for computing PCA matrices have been either too slow or demanded more memory than is available on desktop PCs. This often forces analysts to ‘bin’ spectra on much more coarse a grid than they would like, perhaps even to unity mass bins even though much higher resolution is available, or select only part of an image for PCA analysis, even though PCA of the full data would be preferred. We apply the new ‘random vectors’ method of singular value decomposition proposed by Halko and co‐authors to time‐of‐flight (ToF)SIMS data for the first time. This increases the speed of calculation by a factor of several hundred, making PCA of these datasets practical on desktop PCs for the first time. For large images or 3D depth profiles we have implemented a version of this algorithm which minimises memory needs, so that even datasets too large to store in memory can be processed into PCA results on an ordinary PC with a few gigabytes of memory in a few hours. We present results from ToFSIMS imaging of a citrate crystal and a basalt rock sample, the largest of which is 134GB in file size corresponding to 67 111 mass values at each of 512 × 512 pixels. This was processed into 100 PCA components in six hours on a conventional Windows desktop PC. © 2015 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd.     

New Features in the Lipid A Structure of <Emphasis Type="Italic">Brucella suis</Emphasis> and <Emphasis Type="Italic">Brucella abortus</Emphasis> Lipopolysaccharide

Brucellaceae are Gram-negative bacteria that cause brucellosis, one of the most distributed worldwide zoonosis, transmitted to humans by contact with either infected animals or their products. The lipopolysaccharide exposed on the cell surface has been intensively studied and is considered a major virulence factor of Brucella. In the last years, structural studies allowed the determination of new structures in the core oligosaccharide and the O-antigen of this lipopolysaccharide. In this work, we have reinvestigated the lipid A structure isolated from B. suis and B. abortus lipopolysaccharides. A detailed study by MALDI-TOF mass spectrometry in the positive and negative ion modes of the lipid A moieties purified from both species was performed. Interestingly, a new feature was detected: the presence of a pyrophosphorylethanolamine residue substituting the backbone. LID-MS/MS analysis of some of the detected ions allowed assurance that the Lipid A structure composed by the diGlcN3N disaccharide, mainly hexa-acylated and penta-acylated, bearing one phosphate and one pyrophosphorylethanolamine residue.

Open image in new window

Graphical abstract ?