Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

Role of the tautomerism of 2-azaadenine and 2-azahypoxanthine in substrate recognition by xanthine oxidase

The tautomerism of 2-azaadenine and 2-hypoxanthine has been examined in the gas phase and in aqueous solution. The tautomerism in the gas phase has been studied by means of semiempirical and ab initio quantum-mechanical computations, as well as density-functional calculations. The influence of the aqueous solvent on the relative stability between tautomers has been estimated from self-consistent reaction field calculations performed with different high-level continuum models. The results provide a detailed picture of the tautomeric preference for these purine bases. The importance of tautomerism in the substrate recognition by xanthine oxidase is discussed. Finally, the rate of oxidation of 2-azaadenine and 2- hypoxanthine by xanthine oxidase is discussed in terms of the recognition model at the enzyme active site.     

Synthesis, biological activity and modelling studies of two novel anti HIV PR inhibitors with a thiophene containing hydroxyethylamino core

An efficient method has been developed for the synthesis of a versatile intermediate bearing azido, hydroxyl and ester functions, a useful precursor for peptidomimetic compounds. The two main features for this synthesis were the use of the Sharpless asymmetric dihydroxylation on thiophene acrylate and the subsequent regioselective ring opening by sodium azide of the cyclic sulfite. Highly chemoselective reduction of the azido alcohol led to a key compound which was utilized for the synthesis of two analogues of commercial anti HIV PR such as nelfinavir and saquinavir. The biological activity and molecular modelling study on these two new potential drugs have been evaluated.     

Isobaric vapor–liquid equilibria for the quaternary reactive system: Ethanol + water + ethyl lactate + lactic acid at 101.33 kPa

Isobaric vapor–liquid equilibrium (VLE) data of the reactive quaternary system ethanol (1) + water (2) + ethyl lactate (3) + lactic acid (4) have been determined experimentally. Additionally, the reaction equilibrium constant was calculated for each VLE experimental data. The experimental VLE data were correlated using the UNIQUAC equation to describe the chemical and phase equilibria simultaneously. For some of the non-reactive binary systems, UNIQUAC binary interaction parameters were obtained from the literature. The rest of the binary UNIQUAC parameters were obtained by correlating the experimental quaternary VLE data obtained in this work. A maximum pressure azeotrope at high water concentration for the binary reactive system ethyl lactate + water has been calculated.     

Multicomponent quantitative resolution of binary mixtures by using continuous wavelet transform

Continuous 1-dimensional wavelet transform (WT) was applied to the quantitative analysis of a vitamin combination of thiamine hydrochloride (THI) and pyridoxine hydrochloride (PYR) with strongly overlapping signals. Absorbance data from the UV-Vis absorption spectrum of width 1150 were subjected to Gauss1 and Gauss2 WTs. Because of its flexibility, data processing, and its high signal amplitude, the continuous WT method is a powerful tool for analysis of multicomponent mixtures. By measuring the amplitude signals corresponding to the selected zero-crossing points of the transformed signal, we obtained the calibration curve. The validation of the calibration graphs was confirmed with different mixtures of THI and PYR at various concentration ratios. A brief explanation of the continuous wavelet method is given. MATLAB 6.5 software was used to perform the calculations. The results of our study were compared with those obtained by spectroscopic, chemometric, and liquid chromatographic methods, and good agreement was found.     

QSAR Studies on the COX-2 Inhibition by 3,4-Diarylcycloxazolones Based on MEDV Descriptor

Selective inhibition of cyclooxygenase-2 (COX-2) might avoid the side effects of current available nonsteroidal antiinflammatory drugs while retaining their therapeutic efficacy. A novel variable selection and modeling method based on prediction is developed to construct the quantitative structure-activity relationships (QSAR) between the molecular electronegativity distance vector (MEDV) based on 13 atomic types and the biological activities of a set of selective cyclooxygenase-2 inhibitory molecules, 3,4-diarylcycloxazolones (DAA) plus indomethacin,naproxen, and celecoxib. Using multiple linear regression, a 5-variable linear model is developed with the calibrated correlation coefficient of 0.9271 and root mean square error of 0.17 in modeling stage and the validated correlation coefficient of 0.9030 and root mean square error of 0.20 in leave-one-out validation step, respectively. To further test the predictive ability of the model, 20 DAA compounds are picked up to construct a training set which is used to build a QSAR model and then the model is employed to predict the biological activities of the balance compounds. The predicted correlation coefficient and root mean square error are 0.9332 and 0.19, respectively.     

An improved clean-up strategy for simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), and polychlorinated biphenyls (PCB) in fatty food samples

The study and extension of a simple automated clean-up method for polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) to a broad range of polychlorinated biphenyls (PCB) is described. The isolation of seven PCDD, ten PCDF, and three coplanar PCB (cPCB) is extended to eight monoortho substituted PCB and seven so-called "marker PCB" (Aroclor 1260) for fatty food samples. This enables quantification of 35 compounds - including all congeners with a WHO toxic equivalent factor (TEF)--in a single extraction and single purification step. The chromatographic behaviour of mono-ortho PCB and marker PCB on a variety of adsorbents, including basic alumina, has been studied. Partitioning of analytes through multi-column sequences is described and correlated with their structural and electronic properties, by use of molecular modelling calculations. The fractionation process available with the Power-Prep automated clean-up system enables rapid independent analysis of the different groups of compounds. Gas chromatography with high resolution mass spectrometry (GC-HRMS) is used for the PCDD/F and cPCB fraction and quadrupole ion-storage tandem in time mass spectrometry (GC-QISTMS) for analysis of the remaining PCB. A comparison study was performed on quality-control samples and real fatty food samples to evaluate the robustness of the new strategy compared with a reference method. On the basis of this simultaneous clean-up, a rapid simplified strategy for PCDD/F and selected PCB analysis determination is proposed for fatty food samples.     

Investigation on the Interaction of Bendazac with β-, Hydroxypropyl-β-, and γ-, yclodextrins

The interactions of Bendazac, a topical non-steroidal anti-inflammatory drug, with-cyclodextrin, hydroxypropyl--cyclodextrin and -cyclodextrinwere investigated to evaluate possibilities to improve the drug's poor water solubilityand eventually to enhance the topical delivery of Bendazac. Phase solubility studiesdemonstrated the ability of the selected cyclodextrins to complex with Bendazac andincrease drug solubility. The amount of solubilized Bendazac increased linearly withthe addition of each cyclodextrin according toA_L type plots. ¹³C-NMR studiesshowed that the Bendazac A-ring was included in the cavity of the three cyclodextrins.The -cyclodextrin was also able to include the B-ring of Bendazac, forminga complex where one drug molecule fitted into two cyclodextrin molecules. Equimolarsolid systems of the drug with each cyclodextrin carrier were prepared using varioustechniques (physical mixing, spray-drying and freeze-drying). The results of differential scanning calorimetry and Fourier transform infrared analysis, performed on the solid systems, demonstrated that freeze-dried and spray-dried products had a high degree of amorphization and agreed with the hypothesis of the existence of drug–cyclodextrin interaction in the solid state. The cyclodextrins tested were able to improve the dissolution of Bendazac. The dissolution profile of the drug was also affected by the physico-chemical properties of each solid system, the freeze-dried products being the most rapidly dissolving forms.     

Determination of arsenic in mussels by slurry sampling and electrothermal atomic absorption spectrometry (ETAAS)

A method for the determination of arsenic in slurries of mussel tissue using palladium-magnesium nitrate as modifier was optimized. The slurry was stabilized by a 0.015% (v/v) of Triton X-100. To achieve complete mineralization the slurries were ashed at 480 °C for 10s in an air flow (50 ml/min) and at 1200 °C for 15s in an argon flow (300 ml/min) in the presence of Pd—Mg(NO₃)₂ as modifier. The optimum atomization temperature was 2200 °C. The precision and accuracy of the method were studied using the Reference Material BCR n ° 278 Mussel Tissue (Mytilus edulis). The detection limit (LOD) of the final slurry solution was 1 g/l of arsenic corresponding to an arsenic level in the mussel of 1.3 g/g, for a 0.5% (m/v) slurry. Results of calibration using aqueous standards and the standard additions method were compared. The method was applied to the determination of arsenic in mussels from the Galician coast. The levels found lie between 2 and 9.3 g/g of arsenic.     

On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.