Heterometallic copper-lanthanum complexes of 4-(1H)-pyridone

Summary Reaction of Cu(OAc)₂, 4-(1H)-pyridone (LH) and Dy or Gd nitrate in MeOH resulted in the formation of the heterometallic complexes [Cu₂LnL₂(LH)₂(NO₃)(OH)₄· xH₂O], Ln = Dy (1) or Gd (2). Reaction of Cu(OH)₂ with 4-(1H)-pyridone and Dy(NO₃)₃ in DMF resulted in the formation of the heterometallic compound [Cu₂DyL₂(LH)₂(NO₃)₂(OH)₃·DMF] (3). The Cu complexes [Cu(OAc)L]₂ and [CuL₂·DMF] _x have also been prepared from the reaction of 4-(1H)-pyridone with Cu²⁺ in MeOH and DMF, respectively. All the complexes were characterized by elemental analyses, and i.r. and X-band e.s.r. spectroscopies.     

Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

Structural impacts on thallus and algal cell components of two lichen species in response to low-level air pollution in pacific northwest forests.

Lichens have long been regarded as bioindicators of air pollution, and structural studies typically have indicated negative impacts in highly polluted areas. In this research, Parmelia sulcata and Platismatia glauca were collected from one clean and two polluted sites in the Pacific Northwest forests of the United States to investigate the anatomical and ultrastructural responses of relatively resistant lichens to moderate air pollution. Light microscopy of polluted materials revealed only slight increases in the algal cell proportions of the thallus, and a decrease in the fungal cells of the medulla. Using transmission electron microscopy, increased lipid droplets in the cytoplasm and an increase in the cell wall thickness of the photobionts were found in the polluted lichens. These results were compared with physiological data in which the net carbon uptake did not show any significant differences; however, the total chlorophyll content was heightened in the polluted samples. The increased total chlorophyll content and the absence of any changes in the algal cell proportions of the polluted samples suggest that the photobionts possessed a higher chlorophyll content per unit volume of the photobiont at polluted sites. The results also indicate that lichens have altered their storage allocation in different cellular compartments. This may be a result of symbiotic readjustment(s) between the photobiont and the mycobiont. In comparison with the physiological results from these two species, these changes do not represent damaging effects by low-level air pollution.     

Haplotyping by capillary electrophoresis

The investigation of the genetic background and phenotype structures of complex diseases, such as cardiovascular or psychiatric disorders and tumors, is one of the most scrutinized fields of the post genomic era. Besides the multiplex analysis of genetic markers and polymorphisms throughout the whole genome, more and more attention is focused on the interaction between the etiological factors of these traits. Haplotype determination, rather than multiplex genotyping seems to be one of the first building blocks of this endeavor. This review focuses on the importance and theoretical background of haplotyping, and summarizes the recent examples of novel and emerging haplotyping techniques by capillary gel electrophoresis based DNA fragment analysis, a powerful tool for the examination of the inheritance of complex traits.     

A comparative study of several HPLC methods for determining free amino acid profiles in honey

A study of the viability of three derivatizing reagents for obtaining amino acid profiles in honey through high performance liquid chromatography (HPLC) is presented. A method using diode array detection based on a reaction with diethyl ethoxymethylene malonate (DEMM) and two other methods using fluorescence detection based on derivatization with fluorenylmethyl chloroformate (FMOC-Cl) and 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) have been developed. The three methods yield detection limits close to the ppb level, but vary in relation to other analytical characteristics. The use of methyl chloroformate derivatives allows the profile to be obtained with the greatest sensitivity within a short time frame. On applying such methods to honey samples of diverse botanical origin, we observe that the proline values obtained are always lower than those found using the official spectrophotometric method, thereby underlining the advisability of using HPLC methods to reduce uncertainty in these results.     

The cycloaddition way to novel deoxy disaccharide analogs

A novel heterocycloaddition merges 2-thiono-3-ketolactones with carbohydrate glycals to afford materials which resemble disaccharides with an O-glycosidic linkage at the anomeric center and a thioether linking both C-2 and C-2′, thus creating a third heterocyclic ring. Upon desulfurization, these novel cycloadducts afford materials which are models for 2-deoxydisaccharides. Studies with two keto lactones and seven glycals are described.     

Synthesis and evaluation of a C8 stationary phase on a silica hydride surface by hydrosilation of 1-octyne

The silanization/hydrosilation method is used to bond an alkyne (1-octyne) to a silica hydride surface. The new bonded material is characterized by elemental analysis and diffuse reflectance infrared Fourier transform spectroscopy. The hydrophobic behavior of this material was determined by the retention characteristics of aromatic solutes and the shape selectivity as well as phase classification (monomeric or polymeric) was measured by the polycyclic aromatic hydrocarbon mixture standard reference material 869. The presence of residual silanols on the bonded phase was probed by several basic solutes at pH 7. Long-term stability studies were conducted by measuring retention and peak symmetry of basic compounds over several thousand column volumes at pH 10.     

Seed gum ofStryphnodendron barbatiman (barbatimão)

Stryphnodendron barbatiman (barbatimão) is a native tree that is found throughout the “Cerrados,” a region of Central Brazil. Plant seeds, on water extraction, furnished 28 g% galactomannan (dryweight basis), the monosaccharide composition of which (galactose to mannose ratio, 1.0:1.5) fits in the legume heteromannan group. This seed gum, after Sevag deproteinization, still retained 6 g% of associated protein and had a molecular weight of about 1.8 MD on gel filtration. A high intrinsic viscosity (1300 cP) was observed for the polysaccharide sample obtained after reflux of the crushed seeds in 80% aqueous methanol.

     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.