Design of neutral, mono- or di-cationic water-soluble trihydrazidophosphoradamantanes

The versatile behavior of a trihydrazidophosphoradamantane allowing the synthesis of a variety of neutral, mono- or di-cationic water-soluble molecules of potential interest for biphasic catalysis is reported.     

Synthesis and Diels-Alder reaction of a sapphyrin derivative

Sapphyrins participate in Diels-Alder reactions with pentacene affording novel barrelene-fused sapphyrins. The new compounds were synthesized using traditional heating and microwave irradiation conditions. The experiments carried out under microwave irradiation proved cleaner, affording only the monoadduct and in higher yields.     

Synthesis of new chiral amines with a cyclic 1,2-diacetal skeleton derived from (2R, 3R)-(+)-tartaric acid

The syntheses of new chiral cyclic 1,2-diacetals from (2R, 3R)-( )-tartaric acid are described. C(2)-symmetrical diamines were prepared via direct amidation of the tartrate or from the corresponding bismesylate via reaction with sodium azide. For C1-symmetrical compounds, the Appel reaction was used to form the key intermediate, a monochlorocarbinol, from the diol. Some of the new chiral compounds, produced in good to high yields, may be potentially useful as asymmetric organocatalysts or as nitrogen and sulfur chelating ligands for asymmetric metal catalyzed reactions. Thus, a bis-N-methyl-methanamine derivative, used in substoichiometric amounts, was found to catalyze the enantioselective addition of cyclohexanone to (E)-beta-nitrostyrene with high diastereoselectivity (syn / anti = 92:8), albeit giving moderate optical purity (syn: 30 %).     

Conductivity percolation in loosely compacted microcrystalline cellulose: An in situ study by dielectric spectroscopy during densification

The present study aims at contributing to a complete understanding of the water-induced ionic charge transport in cellulose. The behavior of this transport in loosely compacted microcrystalline cellulose (MCC) powder was investigated as a function of density utilizing a new type of measurement setup, allowing for dielectric spectroscopy measurement in situ during compaction. The ionic conductivity in MCC was found to increase with increasing density until a leveling-out was observed for densities above approximately 0.7 g/cm3. Further, it was shown that the ionic conductivity vs density followed a percolation type behavior signifying the percolation of conductive paths in a 3D conducting network. The density percolation threshold was found to be between approximately 0.2 and 0.4 g/cm3, depending strongly on the cellulose moisture content. The observed percolation behavior was attributed to the forming of interparticulate bonds in the MCC and the percolation threshold dependence on moisture was linked to the moisture dependence of particle rearrangement and plastic deformation in MCC during compaction. The obtained results add to the understanding of the density-dependent water-induced ionic transport in cellulose showing that, at given moisture content, the two major parameters determining the magnitude of the conductivity are the connectedness of the interparticluate bonds and the connectedness of pores with a diameter in the 5-20 nm size range. At densities between approximately 0.7 and 1.2 g/cm3 both the bond and the pore networks have percolated, facilitating charge transport through the MCC compact.     

Simultaneous determination of monomethylmercury, monobutyltin, dibutyltin and tributyltin in environmental samples by multi-elemental-species-specific isotope dilution analysis using electron ionisation GC-MS

In this work, the simultaneous determination of four organometallic species (monomethylmercury, monobutyltin, dibutyltin and tributyltin) in environmental samples by using a GC-MS system with electron ionisation has been established. The measurement of isotope ratios in each species was accomplished by selecting the most adequate molecular cluster, and simple mathematical equations were applied to correct the contributions of 13C from the organic groups attached to the tin and mercury atoms. The influence of different parameters such as dwell time on the precision and accuracy of the measured isotope ratios in each target species has also been studied. The determination and the sample preparation procedures presented in this work were first individually validated by analysing several certified reference materials for butyltin compounds (mussel tissue CRM-477 and marine sediment SOPH-1) and for monomethylmercury (tuna fish CRM-464) using an innovative focused microwave technology for the extraction of the species from the solid samples. Additionally, the simultaneous determination of the four species was successfully validated by obtaining quantitative recoveries in spiked natural waters and by analysing the certified reference material BCR-710 (certified in tributyltin and monomethylmercury). The values obtained in such certified tissue were fully in agreement not only with the certified mass fractions but also with the proposed indicative values for mono- and dibutyltin.     

Ultra-performance liquid chromatography/tandem mass spectrometry method for the determination of lercanidipine in human plasma

A simple, sensitive and rapid ultra-performance liquid chromatography/positive electrospray ionization tandem mass spectrometry (UPLC/ESI-MS/MS) method has been developed and validated for the determination of lercanidipine in human plasma. Lercanidipine and the internal standard, nicardipine, were extracted from plasma by liquid-liquid extraction using tert-butyl methyl ether as the extraction solvent. UPLC analysis was performed isocratically on an AcQuity UPLC BEH C18 analytical column (2.1 x 50.0 mm i.d., particle size 1.7 microm). The mobile phase consisted of 70% acetonitrile in water containing 0.2% v/v formic acid and pumped at a flow rate of 0.30 mL/min. ESI in positive ion mode, with multiple reaction monitoring (MRM), was chosen for the detection of the analytes. The assay was linear over a concentration range of 0.05-30 ng/mL for lercanidipine with a limit of quantitation of 0.05 ng/mL. Quality control samples (0.05, 0.15, 15 and 25 ng/mL) in five replicates from five of analytical runs demonstrated intra-assay precision (% CV < or =7.3%), inter-assay precision (% CV < or =6.1%) and an overall accuracy (% relative error) of less than 6.2%. A run time of less than 1.0 min for each sample made it possible to analyze a large number of human plasma samples per day. The method can be used to quantify lercanidipine in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.     

Absence of long-range magnetic order in the La1.4Sr0.8Ca0.8Mn2O7 bilayered manganite

This paper presents the results of a high-resolution neutron diffraction and magnetometry investigation on the optimally doped (x = 0.3) La(1.4)Sr(0.8)Ca(0.8)Mn(2)O(7) bilayered manganite. In particular, two samples with different oxygen contents have been studied to put in prominence the role of the Mn average valence states at fixed cation concentration. The results show, for the first time, the absence of long-range magnetic order in this optimally doped manganite when the A-site of the structure is doped with equal proportions of isovalent Ca and Sr. This holds for both samples, which present different lattice effects with T, thus suggesting the primary role of cation disorder as the source of the lack of long-range order. The presence, for both samples, of defined insulating- to metallic-like transitions suggests that the transport properties are not linked to the evolution of long-range order and that two-dimensional spin ordering in the layers of the perovskite blocks may be sufficient to "assist" the hole hopping. A possible reason for the suppression of magnetic order induced by the Ca doping is a size effect coupled to the cation size mismatch between the Sr and Ca ions.     

Spectroscopic and potentiometric characterization of oxovanadium(IV) complexes formed by 3-hydroxy-4-pyridinones. Rationalization of the influence of basicity and electronic structure of the ligand on the properties of V(IV)O species in aqueous solution

Aqueous solution studies regarding the identification and characterization of complexes formed by the VIVO ion and 11 3-hydroxy-4-pyridinone derivatives have been performed using EPR and UV/vis spectroscopic techniques. For the three ligands (HL) adequately soluble in water (1-methyl-3-hydroxy-4-pyridinone, 1-methyl-2-ethyl-3-hydroxy-4-pyridinone, and 1,2-diethyl-3-hydroxy-4-pyridinone), potentiometric titrations were performed; the results are consistent with the formation of [V(IV)OL]+, [V(IV)OL2], [V(IV)OL2H(-1)]-, [(V(IV)O)2L2H(-2)], and [V(IV)L3]+ species. Bis chelated complexes are characterized by a cis-trans isomerism, the trans isomer being strongly favored with respect to the cis arrangement. Tris chelated non-oxo V(IV) species were prepared in CH3COOH; their spectroscopic features point to a d(z2) ground state and a geometry intermediate between an octahedron and a trigonal prism, related to the steric requirements of the substituent on the carbon atom in position 2 of the pyridinone ring. Four new solid derivatives, [V(IV)O(1,2-diethyl-3-hydroxy-4-pyridinonato)2], [V(IV)O(1-(p-tolyl)-2-ethyl-3-hydroxy-4-pyridinonato)2], [V(IV)O(1-(p-(n-butyl)phenyl)-2-ethyl-3-hydroxy-4-pyridinonato)2], and [V(IV)O(1-(p-(n-hexyl)phenyl)-2-ethyl-3-hydroxy-4-pyridinonato)2], were isolated and characterized; they exhibited a five-coordinate geometry close to square-pyramid. A criterion for establishing the degree of distortion toward the trigonal-bipyramid on the basis of the electronic absorption spectra is provided. Relationships between the pKa of the -OH group in position 3 of the ring and (i) log K of mono and bis chelated complexes, (ii) pK of the water molecule in cis-[V(IV)OL2(H2O)], (iii) log K of tris chelated species [V(IV)L3]+, and (iv) 51V hyperfine coupling constant (Az) have been established and discussed for a number of pyrone, pyridinone, and catechol ligands. The results are rationalized by assuming for pyridinones an electronic structure intermediate between that of pyrones and catechols. The relationships are valuable to the understanding of the behavior of VIVO species in aqueous solution.     

Modulation of the lowest metal-to-ligand charge-transfer state in [Ru(bpy)2(N-N)]2+ systems by changing the N-N from hydrazone to azine: photophysical consequences

Two Ru(II) complexes, [Ru(bpy)2L](ClO4)2 (1) and [Ru(bpy)2L'](BF4)2 (2), where bpy is 2,2'-bipyridine, L is diacetyl dihydrazone, and L' 1:2 is the condensate of L and acetone, are synthesized. From X-ray crystal structures, both are found to contain distorted octahedral RuN(6)(2+) cores. NMR spectra show that the cations in 1 and 2 possess a C2 axis in solution. They display the expected metal-to-ligand charge transfer (1MLCT) band in the 400-500 nm region. Complex 1 is nonemissive at room temperature in solution as well as at 80 K. In contrast, complex 2 gives rise to an appreciable emission upon excitation at 440 nm. The room-temperature emission is centered at 730 nm (lambda(em)(max)) with a quantum yield (Phi(em)) of 0.002 and a lifetime (tau(em)) of 42 ns in an air-equilibrated methanol-ethanol solution. At 80 K, Phi(em) = 0.007 and tau(em) = 178 ns, with a lambda(em)(max) of 690 nm, which is close to the 0-0 transition, indicating an 3MLCT excited-state energy of 1.80 eV. The radiative rate constant (5 x 10(4) s(-1)) at room temperature and 80 K is almost temperature independent. From spectroelectrochemistry, it is found that bpy is easiest to reduce in 2 and that L is easiest in 1. The implications of this are that in 2 the lowest (3)MLCT state is localized on a bpy ligand and in 1 it is localized on L. Transient absorption results also support these assignments. As a consequence, even though 2 shows a fairly strong and long-lived emission from a Ru(II) --> bpy CT state, the Ru(II) --> L CT state in 1 shows no detectable emission even at 80 K.