Cyclic chronopotentiometry of nickel(II) at mercury electrodes in acidic perchlorate solutions: Case of higher order nonregenerative reactions following electron transfer

The reduction of Ni²⁺ ions at mercury electrodes in acidic perchlorate solutions, at perchlorate concentrations below 0.2 M, is characterized by absence of kinetic control in the preceding step, and by a complex reaction mechanism following the electron transfer. This reaction sequence is known to involve intermetallic compound formation between Ni and Hg and is best described, as shown here, by a parallel second and third order kinetic scheme. Apparent rate coefficients for this kinetic scheme were determined using cyclic chronopotentiometric data and fitting by digital simulation. A linearization test of computed kinetic rate coefficients versus the number of transitions permits quantitative tests of validity of assumptions made.     

Correlation between C-H and C-C spin-spin coupling constants and s character of hybrids calculated by the maximum overlap method

For some thirty hydrocarbons the s character of hybrids obtained by the application of the maximum overlap method have been correlated with C-H and C-C spin-spin coupling constants. The following relationships were obtained: $$J_{{\text{C}}^{{\text{13}}} - {\text{H}}} = 1079a_{{\text{CH}}}^{\text{2}} /(1 + S_{{\text{CH}}}^{\text{2}} ) - 54.9$$ , $$J_{{\text{C}}_{\text{1}}^{{\text{13}}} - {\text{C}}_{\text{2}}^{{\text{13}}} } = 1020.5a_{{\text{C}}_{\text{1}} }^2 a_{{\text{C}}_{\text{2}} }^{\text{2}} /(1 + S_{{\text{CC}}}^{\text{2}} ) - 8.2$$ . Here the coupling constants are expressed in cps units. In the calculation of the maximum overlap hybrids either the experimental bond lengths or a standard bond lengths were used. For the \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}}\) and \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}} \) coupling constants the standard deviations are 0.9 cps and 1.9 cps respectively. It has been suggested that the large additive constant in the \(J_{{\text{C}}^{{\text{13}}} - {\text{H}}}\) correlation may be attributed to the ionic character of C-H bonds. A good agreement with the experimental data strongly supports the idea that the Fermi contact term and the hybridization are dominant factors in determining carbon-hydrogen and carbon-carbon spin-spin coupling constants across one bond, at least in hydrocarbons.     

Multiplex polymerase chain reaction analysis of Glu-1 high-molecular-mass glutenin genes from wheat by capillary electrophoresis with laser-induced fluorescence detection

The unique bread-making properties of wheat are closely correlated with composition and quantity of high-molecular-mass (HMW) glutenin subunits encoded by the Glu-1 genes. We report the development of a multiplex polymerase chain reaction (PCR) method to identify bread wheat genotypes carrying HMW glutenin allele composition of Glu-1 complex loci (Glu-A1, Glu-B1 and Glu-D1) by capillary electrophoresis(CE) with laser-induced fluorescence (LIF) detection. Two triplex primer sets of HMW glutenin subunit genes were examined. An automated and rapid CE-LIF technique is helpful in the multiplex PCR optimization process. Two fluorescent intercalating dyes (EnhanCE, and YO-PRO-1) are compared for detection of DNA fragments. Amplified DNA fragments of HMW glutenin Glu-1 genes were well separated both by agarose slab-gel electrophoresis and CE, and revealed minor differences between the sequences of 1Ax2*, 1Axnull, 1Bx6, 1Bx7, 1Bx17 and 1Dx5 genes. Moreover, CE technique requires samples of smaller volumes in comparison to slab-gel electrophoresis, and data can be obtained in less than 20 min. There was a very high concordance in the assessment of the molecular size of PCR-generated DNA markers. Fast and accurate identification of molecular markers of Glu-1 genes by CE-LIF can be an efficient alternative to standard procedure separation for early selection of useful wheat genotypes with good bread-making quality.     

Mössbauer spectroscopic and X-ray diffraction study of the thermal decomposition of natural siderite and goethite

Thermal decomposition of natural siderite and goethite has been studied using Mössbauer spectroscopy and X-ray diffraction. Hematite and magnetite were the principal compounds formed during high temperature treatment of siderite. Natural goethite transformed to hematite at high temperatures. The crystal structures, stoichiometry and the nuclear magnetic properties of Fe-oxides formed are discussed.     

Synthesis of novel, potentially biologically active dibenzosuberone derivatives

Novel representatives of the important group of biologically active dibenzosuberone derivatives were prepared: 3,7-dibromo-5-(dimethylaminoethyl- oxyimino)-10,11-dihydro-5H-dibenzo[a,d]cyclohepta-1,4-diene (1), 3,7-dibromo-5-(3- dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2) and 1,7- dibromo-5-(3-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo-[a,d]-cycloheptene (3). These compounds are potential tricyclic antidepressants (TCAs), which are still the most frequently prescribed antidepressants in many countries.     

Comparative thermal analysis of commercial and low-grade bauxites

This paper presents qualitative and quantitative comparative results on the simultaneous TG-DTG DTA of five commercial and low-grade bauxites. The methodology of qualitative determination of the basic mineral forms contained in bauxites is currently being established. The weight losses relating to the steps in the TG curve allow determination of the contents of the basic minerals in bauxite. These are recalculated as percentages of Al₂O₃, SiO₂, CaO moisture and total volatiles. The final results are in accordance with the results of classical chemical analyses, and this jusitifies the use of this technique as a quick method for qualitative and quantitative determinations of both commercial and low-grade bauxites.

---

Zusammenfassung Qualitative und quantitative Ergebnisse vergleichender simultaner TG-DTG-DTA-Untersuchungen an 5 kommerziellen und geringwertigen Bauxiten werden vorgestellt. Die Methodologie der qualitativen Bestimmung der wichtigsten im Bauxit enthaltenen Minerale wird ausgearbeitet. Die Gewichtsverluste bei den entsprechenden TG-Stufen erlauben die Berechnung der Gehalte an den wichtigsten Mineralen. Diese werden umgerechnet in die Anteile an Al₂O₃, SiO⁰², CaO, Feuchtigkeit und Glühverlust. Letztere Resultate stimmen mit denen klassisch-chemischer Analyse überein. Das erlaubt die Anwendung thermoanalytischer Methoden als Schnellverfahren für qualitative und quantitative Bestimmungen in kommerziellen und geringwertigen Bauxiten.

---

, . , . , , , . , , .

     

Preparation and the mechanisms of formation of silver particles of different morphologies in homogeneous solutions

Uniform, well-dispersed silver particles of various morphologies have been prepared by reducing highly acidic silver nitrate solutions with ascorbic acid in the presence of a sodium naphthalene sulfonate-formaldehyde copolymer as dispersing agent. By varying the temperature of the reaction, the free acid content, the addition rate of the reductant, and the aging time, both isometric and anisotropic silver particles could be obtained. It was found that the latter were formed by aggregation of nanosize subunits, which were identified by electron microscopy and X-ray diffractometry.     

Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

Investigation of changes in catalyst for conversion by means of steam during use in an industrial reactor

A study was made of the changes in the active component of a commercial catalyst for methane reforming by means of steam, as a function of its duration of use and of its position in an industrial reactor. The samples for examination were taken after 3, 8, 9 and 20 months of catalyst use, and from seven different levels in the reformer tube, ranging from the top to the bottom.DTA, TG, IR spectroscopy, X-ray diffraction and surface area determination were used to follow the catalyst changes.

---

Zusammenfassung Veränderungen der aktiven Komponente eines kommerziellen Katalysators zur Methanreformierung mittels Wasserdampf wurden in Abhängigkeit von der Betriebsdauer und der Lage im industriellen Reaktor untersucht. Proben für die Untersuchung wurden nach 3-, 8-, 9- und 20-monatiger Betriebsdauer aus 7 verschiedenen Höhen vom Boden bis zum Kopf des Reformer-Rohres entnommen. Veränderungen des Katalysators wurden mittels DTA, TG, IR-Spektroskopie, Röntgendiffraktometrie und Oberflächenmessungen verfolgt.

---

, - , @2 . 3, 8, 9 20 -, -. , , , , , .