Cu(OTf)2-promoted efficient synthetic route towards glycospiro-pyrrolo[2,1-a]isoquinolines

A simple, convenient and efficient protocol for the construction of an array of glycospiro-pyrroloisoquinolines using isoquinolinium ylide and a carbohydrate-derived exocyclic olefin in the presence of Cu(OTf)₂–Et₃N catalytic system is described. Isoquinoline and alkylbromoacetates/2-bromoacetophenones were employed to generate the azomethine ylides in the presence of Et₃N in refluxing toluene and subsequent exposure to the olefin led to the desired isoquinoline derivatives.     

rac-BINAP-PdCl2 catalyzed Heck reactions of 3-formylquinolin-2-yl chlorides with methyl acrylate: synthesis of methyl 3-(3-formylquinolin-2-yl) acrylates

rac-BINAP-PdCl₂ catalytic system catalyzed Heck reaction of 3-formylquinolin-2-yl chlorides with methyl acrylate in DMA is described to the synthesis of methyl 3-(3-formyl-quinolin-2-yl)-acrylates, in good to excellent yields. The reaction could be also extended with other activated alkenes to afford Heck products. Fused-benzene ring in heterocyclic and carbocyclic moieties was found to enhance the yields.     

BF3·OEt2-catalyzed synthesis of 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran and trans-fused hexahydropyrano[3,2-c]chromene derivatives

A novel intramolecular Prins cyclization of (E)-5-(2-(hydroxymethyl)phenyl)pent-4-en-1-ol with aldehydes has been achieved using 10 mol % BF₃·Et₂O to produce 1-(tetrahydropyran-3-yl)-1,3-dihydroisobenzofuran derivatives in good to excellent yields with high selectivity. Similar type of coupling with salicylaldehydes provides the trans-fused hexahydropyrano[3,2-c]chromene derivatives in excellent yields.     

Determination of Required HLB of Capryol 90

The required hydrophilic-lipophilic balance (HLB) of an oily substance indicates the HLB of the surfactants required to prepare a stable emulsion using the oil. This study utilizes empirical method to calculate required HLB (RHLB) of Capryol 90 using surfactant blends (Span 20, Tween 20, vitamin E TPGS, Pluronic F68, Span 60, and Tween 80). The methods used were assessment of degree of creaming after centrifugation and after shelf storage for 28 days at room temperature, turbidimetric method, accelerated stability study, and droplet size analysis. The droplet size was found to be in the range of 15 to 2 µm and v/v% separation after centrifugation was found to be 0–82%. The RHLB for Capryol 90 was found to be 15. The effect of various surfactant blends was investigated. Results revealed that a blend of tocopherol polyethylene glycol succinate (TPGS) and Pluronic F68 gave the most stable emulsion for Capryol 90.     

Industrial Applications of Dimeric Surfactants: A Review

Dimeric surfactants also known as gemini surfactants have received lots of attention for high performance formulations in the various scientific and commercial products. Due to the greater amount of hydrocarbon per molecule, the critical micelle concentrations (CMC) of dimeric are typically one order of magnitude lower than the corresponding monomeric surfactant. They are ten to hundred times more efficient at reducing the surface tension of water and the interfacial tension of the oil-water interface than conventional surfactants. Besides, the Krafft temperatures of gemini surfactants with hydrophilic spacers are generally very low giving these surfactants the capacity to be used in cold water. These surfactants display a range of interesting properties, including elevated surface activity, extremely low CMC and extraordinary rheology and self-assimilation aspect. As a consequence of these properties, they have many potential applications include detergents and cleaning agents, cosmetics, textile, and dyeing, dispersion stabilization and emulsion polymerization, genetics science, pharmaceutical, and biological applications.      

Experimental and Theoretical Studies on Synthesized Compounds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution

Imidazole derivatives, namely, 1-((1-(piperazinomethyl)-1H-benzoimidazol-2-yl)methyl)-2-phenylhydrazine (PBIP), and 1-((1-(morpholinomethyl)-1H-benzoimidazol-2-yl)methyl)-2-phenylhydrazine (MBIP) were synthesized and investigated as inhibitors for mild steel corrosion in 15% HCl solution using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. It was found that the inhibition efficiency of both the inhibitors increases with increase in concentration of inhibitors and decreases with increase in temperature. The inhibitors, PBIP and MBIP, show corrosion inhibition efficiency of 92.6% and 91.4% at 300 ppm concentration, respectively, at 303 K. Polarization studies showed that both the studied inhibitors were of mixed type in nature. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were performed for surface study of uninhibited and inhibited mild steel samples. The semi-empirical AM1 method was employed for theoretical calculations.     

Determination of calcium and iron in silicon and uranium silicide using ion chromatography

Two separate ion chromatography methods were developed for the determination of calcium and iron in silicon and uranium silicide. A cation exchange separation with conductivity detection was developed for Ca. A reversed phase column modified with 50 mM camphor-10-sulphonic acid was used for separating Fe. Iron was detected photometrically. Linear calibrations for Ca (0.1–10 ppm) and Fe (0.5–25 ppm) were performed. Limits of detections for Ca and Fe are 0.03 and 0.2 ppm, respectively. The precision of the methods are better than 2 % for Ca at 0.2 ppm and Fe at 2 ppm.     

Fluorimetric estimation of U(VI) in the presence of a large excess of Th(IV)

A fluorescence based method has been developed for the determination of trace amounts of uranium in thorium matrix using a mixture of phosphoric acid (H₃PO₄) and sulfuric acid (H₂SO₄), as fluorescence enhancing reagent for uranyl (UO₂ ²⁺) ion fluorescence. Synthetic samples mimicking the composition of ThO₂ fuel were prepared and the concentration of U(VI) was estimated. Satisfactory results are obtained when uranium is present at a concentration of 10 ppm in solid thorium samples with good precision.     

Structural interaction leading to volumetric changes in aqueous solutions of nitrates of rubidium,cesium, strontium,yttrium, and gallium at different temperatures

Densities of the aqueous dilute solutions of rubidium, cesium, strontium, yttrium, and gallium nitrate were measured at different temperatures ranging from (293.15–343.15) K and atmospheric pressure. From these density values, the apparent molal volumes were calculated and fitted to Masson’s correlation and the temperature dependence was correlated by a second order polynomial. The apparent molal volumes at infinite dilution and experimental slopes have been interpreted in terms of ion–solvent and ion–ion interactions, respectively. The measurements include density as per ASTM D-4052, refractive index (nD²⁵) at sodium D line at 25 °C. Thermal isobaric expansibility was calculated and structure making and structure breaking behaviour of electrolytes were inferred from the sign of the second derivative of apparent molal volumes with respect to temperature at constant pressure. The experimental apparent molal volume was compared with the available literature value.     

Kinetics of Pu(IV) sorption by smectite-rich natural clay

Kinetics of sorption of Pu(IV) by smectite-rich clay has been studied at varying metal ion concentrations. Different concentrations were achieved using different isotopes of Pu, namely, ²³⁹Pu, ²³⁸Pu and ²³⁷Pu. ²³⁷Pu was produced by alpha induced reaction on ²³⁵U, followed by radiochemical separation of Pu from irradiated U₃O₈ target. The concentrations used are above and below the solubility of Pu(IV) under neutral pH conditions, thereby, indicating the mechanism of sorption reactions of Pu(IV) in typical laboratory experiments and field level observations. Kinetics of Pu(IV) at 10^?13 M concentration was found to be fast whereas at higher metal concentration the rate is governed by a slow step, indicating the role of formation of Pu(IV) polymeric species at the sorbent surface.