Unexpected consequences of block polydispersity on the self-assembly of ABA triblock copolymers

Controlled/"living" polymerizations and tandem polymerization methodologies offer enticing opportunities to enchain a wide variety of monomers into new, functional block copolymer materials with unusual physical properties. However, the use of these synthetic methods often introduces nontrivial molecular weight polydispersities, a type of chain length heterogeneity, into one or more of the copolymer blocks. While the self-assembly behavior of monodisperse AB diblock and ABA triblock copolymers is both experimentally and theoretically well understood, the effects of broadening the copolymer molecular weight distribution on block copolymer phase behavior are less well-explored. We report the melt-phase self-assembly behavior of SBS triblock copolymers (S = poly(styrene) and B = poly(1,4-butadiene)) comprised of a broad polydispersity B block (M(w)/M(n) = 1.73-2.00) flanked by relatively narrow dispersity S blocks (M(w)/M(n) = 1.09-1.36), in order to identify the effects of chain length heterogeneity on block copolymer self-assembly. Based on synchrotron small-angle X-ray scattering and transmission electron microscopy analyses of seventeen SBS triblock copolymers with poly(1,4-butadiene) volume fractions 0.27 ≤ f(B) ≤ 0.82, we demonstrate that polydisperse SBS triblock copolymers self-assemble into periodic structures with unexpectedly enhanced stabilities that greatly exceed those of equivalent monodisperse copolymers. The unprecedented stabilities of these polydisperse microphase separated melts are discussed in the context of a complete morphology diagram for this system, which demonstrates that narrow dispersity copolymers are not required for periodic nanoscale assembly.     

Electronic Properties-Morphology Correlation of a Rod-Rod Semiconducting Liquid Crystalline Block Copolymer Containing Poly(3-hexylthiophene)

The influence of the solvent and annealing temperature on the field-effect mobilities and morphologies of poly(3-hexylthiophene)-b-poly(γ-benzyl-l-glutamate) (P3HT-b-PBLG) rod-rod diblock copolymer has been investigated. Thin film X-ray diffraction studies show peaks originating from both P3HT and PBLG indicating that the crystalline nature of both the blocks is conserved after the formation of the block copolymer. It has been observed that the field-effect mobilities of the diblock copolymer are independent of the annealing temperatures for thin films deposited from both 1,2,4-trichlorobenzene and chloroform solvents. The correlation between the field-effect mobility and morphology indicates that the P3HT block self-assembles at the surface SiO(2) dielectric.     

Production,Partial Characterization,and Use of a Red Biochrome Produced by <Emphasis Type="Italic">Serratia sakuensis</Emphasis> subsp. nov Strain KRED for Dyeing Natural Fibers

We have described a novel red biochrome, 514 Da in size, produced by solid-state cultivation of a bacterial isolate obtained from garden soil. The growth requirements of the isolate, the chemical characteristics of the biochrome produced, and the application of the biochrome in dying of silk, wool, and cotton fabrics have been studied. The biochrome obtained after 52 h of incubation and having a λ _max of 535 nm was used for dyeing the fabrics. We found that silk, wool, and cotton fabrics dyed with this new natural red compound have high color strength values and dye uptake along with good color fastness as well as antibacterial activity.     

Microarray-guided discovery of two-photon (2P) small molecule probes for live-cell imaging of cysteinyl cathepsin activities

A microarray immobilized with 105 aldehyde-containing small molecules was screened against mammalian cell lysates over-expressing cathepsin L to identify two potent inhibitors, which were subsequently converted into cell-permeable probes capable of live-cell imaging of endogenous cysteinyl cathepsin activities by two-photon fluorescence microscopy.     

Construction of a six-membered fused N-heterocyclic ring via a new 3-component reaction: synthesis of (pyrazolo)pyrimidines/pyridines

A conceptually new three-component reaction was developed to construct a six-membered fused N-heterocyclic ring affording (pyrazolo)pyrimidines/pyridines as potential inhibitors of PDE4. The reaction is catalyzed by triflic acid in acetic acid in the presence of aerial oxygen.     

Comparative proteomic profiling of mammalian cell lysates using phosphopeptide microarrays

A library of 176 human phosphotyrosine-containing peptides was used to establish cell lysate binding profiles in a two colour microarray format. The resulting hits led to the pull-down and identification of biomarkers associated with cancer states.     

Study of lithium ion intercalation/de-intercalation into LiNi1/3Mn1/3Co1/3O2 in aqueous solution using electrochemical impedance spectroscopy

The mechanism of lithium ion intercalation/de-intercalation into LiNi_1/3Mn_1/3Co_1/3O₂ cathode material prepared by reactions under autogenic pressure at elevated temperatures method is investigated both in aqueous and non-aqueous electrolytes using electrochemical impedance spectroscopy (EIS) technique. In accordance with the results obtained an equivalent circuit is used to fit the impedance spectra. The kinetic parameters of intercalation/de-intercalation processes are evaluated with the help of the same equivalent circuit. The dependence of charge transfer resistance (R _ct), exchange current (I ₀), double layer capacitance (C _dl), Warburg resistance (Z _w), and chemical diffusion coefficient (D _Li+) on potential during intercalation/de-intercalation is studied. The behavior of EIS spectra and its potential dependence is studied to get the kinetics of the mechanism of intercalation/de-intercalation processes, which cannot be obtained from the usual electrochemical studies like cyclic voltammetry. The results indicate that intercalation and de-intercalation of lithium ions in aqueous solution follows almost similar mechanism in non-aqueous system. D _Li+ values are in the range of 10^?8 to 10^?14?cm²?s^?1 in aqueous 5?M LiNO₃ and that in non-aqueous 1?M LiAsF₆/EC+DMC electrolyte is in the order of 10^?12?cm²?s^?1 during the intercalation/de-intercalation processes. A typical cell LiTi₂ (PO4)₃/5?M LiNO₃/LiNi_1/3Mn_1/3Co_1/3O₂ is constructed and the cycling stability is compared to that with an organic electrolyte.     

Synthesis, characterization and antimicrobial investigation of mechanochemically processed silver doped ZnO nanoparticles

The application of nanomaterials has gained considerable momentum in various fields in recent years due to their high reactivity, excellent surface properties and quantum effects in the nanometer range. The properties of zinc oxide (ZnO) vary with its crystallite size or particle size and often nanocrystalline ZnO is seen to exhibit superior physical and chemical properties due to their higher surface area and modified electronic structure. ZnO nanoparticles are reported to exhibit strong bacterial inhibiting activity and silver (Ag) has been extensively used for its antimicrobial properties since ages. In this study, Ag doped ZnO nanoparticles were synthesized by mechanochemical processing in a high energy ball mill and investigated for antimicrobial activity. The nanocrystalline nature of zinc oxide was established by X-ray diffraction (XRD) studies. It is seen from the XRD data obtained from the samples, that crystallite size of the zinc oxide nanoparticles is seen to decrease with increasing Ag addition. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) data also supported the nanoparticle formation during the synthesis. The doped nanoparticles were subjected to antimicrobial investigation and found that both increase in Ag content and decrease in particle size contributed significantly towards antimicrobial efficiency. It was also observed that Ag doped ZnO nanoparticles possess enhanced antimicrobial potential than that of virgin ZnO against the studied microorganisms of Escherichia coli and Staphylococcus aureus.     

Validated LC–MS/MS method for quantification of agomelatine in human plasma and its application in a pharmacokinetic study

An analytical method based on liquid–liquid extraction has been developed and validated for analysis of agomelatine in human plasma. Fluoxetine was used as an internal standard for agomelatine. A Betasil C18 (4.0 × 100 mm, 5 µm) column provided chromatographic separation of analytes followed by detection with mass spectrometry. The method involves simple isocratic chromatographic conditions and mass spectrometric detection in the positive ionization mode using an API‐4000 system. The proposed method has been validated with linear range of 0.050–8.000 ng/ml for agomelatine. The intra‐run and inter‐run precision values are within 12.12% and 9.01%, respectively, for agomelatine at the lower limit of quantification level. The overall recovery for agomelatine and fluoxetine was 67.10% and 72.96%, respectively. This validated method was used successfully for analysis of plasma samples from a pharmacokinetic study. Copyright © 2012 John Wiley & Sons, Ltd.     

Can functionalized cucurbituril bind actinyl cations efficiently? A density functional theory based investigation

The feasibility of using cucurbituril host molecule as a probable actinyl cation binders candidate is investigated through density functional theory based calculations. Various possible binding sites of the cucurbit[5]uril host molecule to uranyl are analyzed and based on the binding energy evaluations, μ(5)-binding is predicted to be favored. For this coordination, the structure, vibrational spectra, and binding energies are evaluated for the binding of three actinyls in hexa-valent and penta-valent oxidation states with functionalized cucurbiturils. Functionalizing cucurbituril with methyl and cyclohexyl groups increases the binding affinities of actinyls, whereas fluorination decreases the binding affinities as compared to the native host molecule. Surprisingly hydroxylation of the host molecule does not distinguish the oxidation state of the three actinyls.