Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Stepwise hydration and multibody deprotonation with steep negative temperature dependence in the benzene.+ -water system

We studied the stepwise hydration and solvent-mediated deprotonation of the benzene*+ cation (Bz*+) and found several unusual features. The solvent binding energies DeltaH on-1,n for the reactions Bz*+(H2O)n-1 + H2O --> Bz*+(H2O)n are nearly constant at 9 +/- 1 kcal mol-1 for n = 1 to 8. We observed a remarkable sudden decrease in the entropy of association accompanying the formation of Bz*+(H2O)7 and Bz*+(H2O)8, indicating strong orientational restraint in the hydration shells of these clusters consistent with the formation of cagelike structures. We observed the size-dependent deprotonation of Bz*+ in a cooperative multibody process, where n H2O molecules (n >/= 4) can remove a proton from Bz*+ to form protonated water clusters. We measured, for the first time, the temperature dependence of such a process and found a negative temperature coefficient of a magnitude unprecedented in any chemical reaction, of the form k = AT-67+/- 4, or in an Arrhenius form having an activation energy of -34 +/- 1 kcal mol-1. The temperature effect may be explained by Bz*+ and four H2O molecules needing to be assembled from gas-phase components to form the reactive species. Such large temperature effects may be therefore general in solvent cluster-mediated reactions.     

Determination of total arsenic by use of a zinc-column arsine generator

A method for the measurement of total arsenic in extracts of environmental materials is described. Arsenic is reduced to arsine with a zinc reductor column, the evolved arsine is decomposed in a heated carbon-tube furnace, and arsenic determined by measurement of its atomic-absorption at 193.7 nm. The detection limit is 0.002 mug/ml and the coefficient of variation is 1.4% at 0.01 mug/ml.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Synthesis of Some Pyrimidine 2-Oxo(Thio)-4,6-Dione Derivatives

5-Arylidenes 1a and 1b, on reaction with ethyl cyanoacetate and diethyl malonate in the presence of ammonium acetate under Michael condensation, yield pyridine derivatives 2 and 3, respectively. Cyclopentapyrimidine derivative 4 can also be obtained by the reaction of 1a with malononitrile in the presence of piperidine. The reaction of 5-arylidene lb with monochloroacetic acid in an alkaline medium gives the thiazol derivative 5. Also, spiro-[3′, 5′]cyclohexenyl pyrimidine derivative 6 could be obtained from the reaction of 1d with maleic anhydride. On the other hand, 5-arylidene 1e reacts with maleic anhydride to give 2-thiobarbituric acid derivative 7. The condensation reaction of 2-thiovioluric acid 8 with some hydrazines affords the triazole derivatives 9a-d. Finally, barbituric acid condenses with isatin to give 5-arylidene 1f, which can be cyclized with phosphorous pentoxide to afford 10.     

A microwave-assisted sequential extraction of water and dilute acid soluble arsenic species from marine plant and animal tissues

This paper describes the use of dilute nitric acid for the extraction and quantification of arsenic species. A number of extractants (e.g. water, 1.5 M orthophosphoric acid, methanol-water and dilute nitric acid) were tested for the extraction of arsenic from marine biological samples, such as plants that have proved difficult to quantitatively extract. Dilute 2% (v/v) nitric acid was found to give the highest recoveries of arsenic overall and was chosen for further optimisation. The optimal extraction conditions for arsenic were 2% (v/v) HNO₃, 6 min⁻¹, 90 °C. Arsenic species were found to be stable under the optimised conditions with the exception of the arsenoriboses which degraded to a product eluting at the same retention time as glycerol arsenoribose. Good agreement was found between the 2% (v/v) HNO₃ extraction and the methanol-water extraction for the certified reference material DORM-2 (AB 17.1 and 16.2 μg g⁻¹, respectively, and TETRA 0.27 and 0.25 μg g⁻¹, respectively), which were in close agreement with the certified concentrations of AB 16.4 ± 1.1 μg g⁻¹ and TETRA 0.248 ± 0.054 μg g⁻¹.To preserve the integrity of arsenic species, a sequential extraction technique was developed where the previously methanol-water extracted pellet was further extracted with 2% (v/v) HNO₃ under the optimised conditions. Increases in arsenic recoveries between 13% and 36% were found and speciation of this faction revealed that only inorganic and simple methylated species were extracted.     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

New resveratrol oligomers in the stem bark of Vatica pauciflora

Five new resveratrol oligomers; pauciflorols A-C (1-3), isovaticanols B (6) and C (8), and three new oligostilbene glucosides; pauciflorosides A (11), B (13), C (14), were isolated from the stem bark of Vatica pauciflora (Dipterocarpaceae) together with known 17 resveratrol oligomers (4, 5, 7, 9, 10, 12 and 15-25) and bergenin (26). The structures of isolates were established on the basis of detailed spectroscopic analysis. The typical and characteristic spectral properties of some resveratrol oligomers were also discussed.     

Kinetics of the solvolysis of [Co(Rpy)4Cl4]+ with R = 4-t-Bu, 3-Me or 3-Et in mixtures of urea with water

Summary The kinetics of the solvolysis of complex ions trans-[Co(Rpy)₄Cl₂]⁺, with R = 4-t-Bu, 3-Me and 3-Et, have been investigated in mixtures formed by adding urea to water, which enhances the dielectric constant and decreases solvent structure. Differential effects of the changes in solvent structure on the initial and transition states are found to be important factors controlling changes in the rate constant with solvent composition. The variation of the enthalpy and the entropy of activation with solvent composition are contrasted with their variations found for the solvolysis of [Co(Rpy)₄Cl₂]⁺ in mixtures where solvent structure is enhanced by additions of a co-solvent to water. The application of a free energy cycle to the process of the initial state going to the transition state suggests that the Co³⁺ cation in the transition state is more stable than the Co³⁺ cation in the initial state in the water + urea mixtures.     

Physicochemical studies of a new series of aryloxide complexes,Na2[Co(OAr)4].nTHF

Summary By the interaction of anhydrous CoBr₂ or CoBr₂·2THF with different sodium aryloxides, a new series of complexes of general formula Na₂[Co(OAr)₄]·nTHF (OAr =o-nitro,o-chloro,o-bromo,m-chloro,p-bromo, 2,4-dichloro, 2,6-dichloro, or 2,4-dimethylphenoxide;n = 1, 3, 4 or 5) were prepared and characterized by physicochemical means. The electronic spectra and magnetic measurements suggest a tetrahedral geometry for cobalt(II). Heating the complexes led to reversible loss of THF with an accompanying colour change.