Synthesis of oxime phosphoranes from reaction between triphenylphosphine and acetylenic esters in the presence of oxime derivatives

A new one-pot, simple and effective procedure is presented for the preparation of O-containing phosphorus ylides by the Michael addition reaction of N-methylpyrrole-2-carbaldehydoxime, pyridin-2-carbaldehydoxime or acetophenonoxime with acetylenic esters.     

Organically modified montmorillonite and chitosan–phosphotungstic acid complex nanocomposites as high performance membranes for fuel cell applications

Nanocomposite membranes based on polyelectrolyte complex (PEC) of chitosan/phosphotungstic acid (PWA) and different types of montmorillonite (MMT) were prepared as alternative membranes to Nafion for direct methanol fuel cell (DMFC) applications. Fourier transform infrared spectroscopy (FTIR) revealed an electrostatically fixed PWA within the PEC membranes, which avoids a decrease in proton conductivity at practical condition. Various amounts of pristine as well as organically modified MMT (OMMT) (MMT: Cloisite Na, OMMT: Cloisite 15A, and Cloisite 30B) were introduced to the PEC membranes to decrease in methanol permeability and, thus, enhance efficiency and power density of the cells. X-ray diffraction patterns of the nanocomposite membranes proved that MMT (or OMMT) layers were exfoliated in the membranes at loading weights of lower than 3 wt.%. Moreover, the proton conductivity and the methanol permeability as well as the water uptake behavior of the manufactured nanocomposite membranes were studied. According to the selectivity parameter, ratio of proton conductivity to methanol permeability, the PEC/2 wt.% MMT 30B was identified as the optimum composition. The DMFC performance tests were carried out at 70 °C and 5 M methanol feed and the optimum membrane showed higher maximum power density as well as acceptable durability compared to Nafion 117. The obtained results indicated that owing to the relatively high selectivity and power density, the optimum nanocomposite membrane could be considered as a promising polyelectrolyte membrane (PEM) for DMFC applications.     

Polynomial integrability of the Hamiltonian systems with homogeneous potential of degree − 3

In this paper, we study the polynomial integrability of natural Hamiltonian systems with two degrees of freedom having a homogeneous potential of degree k given either by a polynomial, or by an inverse of a polynomial. For k=−2,−1,…,3,4, their polynomial integrability has been characterized. Here, we have two main results. First, we characterize the polynomial integrability of those Hamiltonian systems with homogeneous potential of degree −3. Second, we extend a relation between the nontrivial eigenvalues of the Hessian of the potential calculated at a Darboux point to a family of Hamiltonian systems with potentials given by an inverse of a homogeneous polynomial. This relation was known for such Hamiltonian systems with homogeneous polynomial potentials. Finally, we present three open problems related with the polynomial integrability of Hamiltonian systems with a rational potential.     

Fractality feature in incompressible three-dimensional magnetohydrodynamic turbulence

Direct Numerical Simulation (DNS) of decaying isotropic 3D magnetohydrodynamic (MHD) turbulence based on the 10243-modes in a periodic box is used to study the statistical properties of turbulence. In this paper, the presence of intermittency in MHD turbulence is investigated through the analysis of the Probability Distribution Function (PDF) for Elsässer fields and total energy fluctuations. We observe that the PDFs of the Elsässer fields fluctuations display a strong non-Gaussian behavior at small scale, which can be ascribed to multifractality feature, while the PDFs of the total energy fluctuations have the same shape over all observed scales and are monofractal. The PDFs have stretched exponential tail and satisfy the function P(|δX|) ～ exp(?A|δX| ^μ ). Numerically, we extract the exponent μ and find that it is constant for monofractal behavior as the length scale varies. To check the notion of self-similarity in the respective fluctuation, we apply the compensated structure functions.     

Application of titanium nanoparticles containing natural compounds in cutaneous wound healing

The aim of the study was the rapid green synthesis of titanium nanoparticles using the aqueous extract of Falcaria vulgaris leaves (TiNPs@FV) and exploring their antioxidant, cytotoxicity, antifungal, antibacterial, and cutaneous wound healing activities under in vitro and in vivo condition. These nanoparticles were characterized by UV-Vis, Fourier transform-infrared(FT-IR), X-ray diffraction XRD), field emission-scanning electron microscopy FE-SEM), and transmission electron microscopy TEM) analyses. The synthesized TiNPs@FV had great cell viability on human umbilical vein endothelial cells and indicted this method was nontoxic. DPPH (2,2-diphenyl-1-picrylhydrazyl) test revealed similar antioxidant potentials for F. vulgaris, TiNPs@FV, and butylated hydroxytoluene. All data of antibacterial, antifungal, and cutaneous wound healing tests were analyzed by SPSS 22 software. In the antimicrobial part of this study, TiNPs@FV indicated higher antifungal and antibacterial effects than all standard antibiotics (p ≤ 0.01). Minimal inhibitory concentration (MIC) and minimal fungicidal concentration of TiNPs@FV against all fungi were at 2–4 mg/mL and 2-8 mg/mL ranges, respectively. But, MIC and minimal bactericidal concentration of TiNPs@FV against all bacteria were at 2-8 mg/mL and 2-16 mg/mL ranges, respectively. In the part of cutaneous wound healing, use of TiNPs@FV ointment significantly (p ≤ 0.01) raised the wound contracture, vessel, hydroxyl proline, hexuronic acid, hexosamine, fibrocyte, and fibrocytes/fibroblast rate and significantly (p ≤ 0.01) decreased the wound area, total cells, neutrophil, and lymphocyte compared to other groups in rats. The results of FT-IR, UV-Vis, XRD, TEM, and FE-SEM confirm that the aqueous extract of F. vulgaris leaves can be used to yield titanium nanoparticles with a notable amount of remedial effects.     

The Field-Dependent Magnetization of d5–d7 Metal β−Diketonate Complexes and Their Macromolecular Polymers

A vibrating sample magnetometer (VSM) has been used to study the field-dependent magnetization, M(H), of the d⁵?d⁷ metal acetates [M(OAc)₂.nH₂O], metal β?diketonate complexes [M(tba)₂(H₂O)₂] and the macromolecular polymers [M(tba)₂(4,4-bipy)]_n (where, M = Mn(II), Fe(II), and Co(II), OAc = O₂CCH₃, tba = deprotonated 3-benzoyl-1.1.1-trifluoroacetone, and 4,4-bipy = 4,4′-bipyridine). The magnetic field strength (H) was applied in the range of 0?10⁴ O_e at ambient temperature (ca. 23°C). The experimental results showed that the d⁵?d⁷ metal acetate, complexes and polymers exhibit low paramagnetic properties excepting [Fe(tba)₂(4,4-bipy)]_n polymer, which had negative magnetization M(emu/g) showing diamagnetic properties in the range 0?10⁴ O_e. The magnetization was almost equal to zero without an applied magnetic field (H(O_e)) for each d⁵?d⁷ metal acetate, complex, and polymer. The linear M(H) curve had a magnetic saturation for iron and manganese acetate species at the magnetic field strengths of 3.1 × 10³ and 4.7 × 10³ Oe, respectively. The external magnetic field reached 9.0 × 10³ O_e without any saturation magnetization for the cobalt compounds. The coordination effect of 3-benzoyl-1.1.1-trifluoroacetone (H-tba) and 4,4′-bipyridine (4,4′-bipy) ligands on the field-dependent magnetization M(H) and paramagnetic behavior of d⁵?d⁷ metal atoms is discussed. The field-dependent magnetization M(H) curves of metal β?diketonate complexes and the polymers including d⁵?d⁷ metal acetates showed a weak field octahedral geometry.     

A Study on Transreactions of PET/PEN Reactive Blending in a Twin‐Screw Extruder Using an Axial Dispersion Model

Transreactions of PET and PEN melt‐mixed in a twin‐screw extruder are investigated. The extruder is modeled and characterized in the frame of a tubular system of closed type. The kinetic modeling is based on a modified second‐order reversible reaction equation, which allows the dispersion equation to be solved analytically. The analysis shows a good agreement between the model and experiment. The axial dispersion model is employed to predict the extent of transesterification reactions (X) and degree of randomness (RD). ¹H NMR measurements are performed to estimate X and RD. Theoretical and experimental data are in good agreement. The model can thus be exploited to describe the effects of processing parameters, mixing time, mixing temperature, and blend composition on X and RD.

     

Polyaniline/graphene oxide nanocomposite as a sorbent for extraction and determination of nicotine using headspace solid-phase microextraction and gas chromatography–flame ionization detector

A solid-phase microextraction fiber was prepared by polyaniline/graphene oxide nanocomposite as sorbent on the surface of a platinized stainless steel wire using electrospinning technique. The nanocomposite structure was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The polyaniline/graphene oxide nanocomposite fiber was used for the determination of nicotine from tobacco samples using headspace solid-phase microextraction method and gas chromatography–flame ionization detection. Influential experimental variables on the extraction efficiency of nicotine, such as extraction time and temperature, humidity and desorption conditions, were evaluated and optimized. Under the optimal experimental conditions? the limit of detection, linear dynamic range, intraday and inter-days precisions were found to be 0.01 μg g^?1, 0.05–700 µg g^?1 (R²?=?0.996), 6.9 and 8.1%, respectively. Comparison of the polyaniline/graphene oxide nanocomposite sorbent with polyaniline and commercial fibers shows longer durability, larger capacity and higher extraction efficiency. The polyaniline/graphene oxide nanocomposite fiber was successfully applied for the determination of nicotine in tobacco samples.