Dielectric properties of plasma polymerized PVCa and composite PVCa:Au films

Dielectric properties of plasma polymerized PVCa and composite PVCa:Au films had been analyzed in the frequency range from 10 to 10⁵ Hz. In order to explain experimental data obtained the modification of Maxwell-Garnett and Bruggeman self-consistent models for the case of three-component composite has been done. The theoretical analysis performed allows to determine peculiarities of dielectric behavior of a three-component system, as well as to disclose the procedure of evaluation of third-component parameters. Results of this analysis are in agreement with experimental ones.     

Iodine photodissociation laser system Perun II

A construction and exploitation of a medium size iodine photodissociation laser system Perun II is reported. This laser produced pulses of infrared light (=1.315m) up to 50 J in energy and 300 ps in duration. The diameter of the beam is 82 mm. The beam divergence is about 4×10^–4 rad. The laser beam can be focused in a focal spot of a power density exceeding 10¹⁴ W/cm². The resuls of measurements of basic plasma parameters on an Al foil target are also presented. A recent improvement of the system includes a conversion to the second harmonic by a DKDP crystal.Presented at bilateral international seminar of High Temperature Laser Plasma and High Gain Iodine Lasers held on 4 July 1991 in the Inst. of Physics, Czechosl. Acad. Sci., in Prague (organized by Division of Optics of the Inst. of Physics, Czechosl. Acad. Sci., and Physical Section (Plasma Division) of the Union of Czech Mathematicians and Physicists.     

Die Komplexe von Dioxocyan (OCN)2 mit TiCl4 und ZrCl4

Complexes of Dioxocyanogen (OCN)₂ with TiCl₄ and ZrCl₄ A solution of (OCN)₂ was obtained by reaction of AgOCN with Br₂ in H₂CCl₂ at ?70°C. From this the complexes TiCl₄(NCO)₂ and ZrCl₄(NCO)₂ were obtained by addition of equimolar amounts of TiCl₄ and ZrCl₄, respectively. According to the i.r. and Raman spectra, the (NCO)₂ ligand is bonded via its N atoms to the metal.     

Mass spectrometric determination of selenenylsulfide linkages in rat selenoprotein P

The reversible formation of a selenenylsulfide linkage in mammalian thioredoxin reductase was identified as having a key role in its activity. Identification of selenenylsulfide and/or diselenide linkages is therefore critical to the determination of the structure and function of selenoproteins. A selenopeptide, (298)SGSAITUQCAENLPSLCSUQGLFAEEK(324) (U=selenocysteine), was isolated from a tryptic digest of rat selenoprotein P. Its two cysteine residues and two selenocysteine (Sec) residues were determined to be present in oxidized form by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The selenopeptide was subjected to partial reduction by dithiothreitol with immediate alkylation by iodoacetamide. This process was monitored by MALDI-TOFMS to determine the number of alkylations that had taken place. The partially reduced and alkylated peptides were then analyzed by nano-electrospray ionization tandem mass spectrometry and the results indicated that selenenylsulfide linkages Sec304-Cys314 and Cys306-Sec316 were present. It is concluded that selenoprotein P contains these two selenenylsulfide bonds.     

Ultra-violet excited laser emission in Na2

Laser emission at different wavelengths in the range of 903–914 nm and around 2.5 m has been observed upon excitation of Na₂ by uv radiation from an excimer laser at 351 nm and an excimer pumped dye laser in this wavelength range. The emission is attributed to a cascade emission followed by . In addition, coupled with the laser emission around 910 nm, broad-band fluorescence peaking around 855.5 nm is observed which, eventually, may be the first observation of the bound-free transition in Na₂.     

A continuous flow system design for simultaneous determination of heavy metals in river water samples

A new design of a continuous flow system applied to the simultaneous determination of the concentration of zinc(II), cadmium(II), lead(II), copper(II), nickel(II), cobalt(II) and chromium(VI) in river water is described. A flow cell made in the laboratory, which has been patented, based on a 'wall-jet' configuration with a three-electrode system is described. Optimum conditions for the determination of the metal ions are reported. The detection limits and relative standard deviation values were 4.01x10(-9) M and 0.078 for Zn(II), 1.76x10(-10) M and 0.056 for Cd(II), 4.69x10(-10) M and 0.134 for Pb(II), 2.29x10(-10) M and 0.138 for Cu(II), 1.61x10(-9) M and 0.093 for Ni(II), 1.91x10(-9) M and 0.113 for Co(II), and 1.35x10(-9) M and 0.081 for Cr(VI). The procedure was applied to a sample of water from the Arlanzón river and the results were compared with inductively coupled mass plasma spectrometry (ICP-MS) as reference method. The final aim of this work is to design a flow system, which can be automated.     

Competition between pi and non-pi cation-binding sites in aromatic amino acids: a theoretical study of alkali metal cation (Li+, Na+, K+)-phenylalanine complexes

To understand the cation-pi interaction in aromatic amino acids and peptides, the binding of M(+) (where M(+) = Li(+), Na(+), and K(+)) to phenylalanine (Phe) is studied at the best level of density functional theory reported so far. The different modes of M(+) binding show the same order of binding affinity (Li(+)>Na(+)>K(+)), in the approximate ratio of 2.2:1.5:1.0. The most stable binding mode is one in which the M(+) is stabilized by a tridentate interaction between the cation and the carbonyl oxygen (O[double bond]C), amino nitrogen (--NH(2)), and aromatic pi ring; the absolute Li(+), Na(+), and K(+) affinities are estimated theoretically to be 275, 201, and 141 kJ mol(-1), respectively. Factors affecting the relative stabilities of various M(+)-Phe binding modes and conformers have been identified, with ion-dipole interaction playing an important role. We found that the trend of pi and non-pi cation bonding distances (Na(+)-pi>Na(+)-N>Na(+)-O and K(+)-pi>K(+)-N>K(+)-O) in our theoretical Na(+)/K(+)-Phe structures are in agreement with the reported X-ray crystal structures of model synthetic receptors (sodium and potassium bound lariat ether complexes), even though the average alkali metal cation-pi distance found in the crystal structures is longer. This difference between the solid and the gas-phase structures can be reconciled by taking the higher coordination number of the cations in the lariat ether complexes into account.     

Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method

Organic-inorganic hybrids were prepared using diglycidyl ether of bisphenol A (DGEBA) type epoxy and tetraethoxysilane via the sol-gel process. The DGEBA type epoxy was modified by a coupling agent to improve the compatibility of the organic and inorganic phases. The sol-gel technique was used successfully to incorporate silicon and phosphorus into the network of hybrids increasing flame retardance.Fourier transform infrared spectroscopy and ²⁹Si nuclear magnetic resonance spectroscopy were used to characterize the structure of the hybrids. In condensed siloxane species for TEOS, silicon atoms through mono-, di-, tri-, and tetra-substituted siloxane bonds are designated as Q¹, Q², Q³, Q⁴, respectively. For 3-isocyanatopropyltriethoxysilane and diethylphosphatoethyltriethoxysilane, mono-, di-, tri-, tetra-substituted siloxane bonds are designated as T¹, T², T³. Results revealed that Q⁴, Q³, T³ are the major environments forming a network structure. The morphology of the ceramer was examined by scanning electron microscopy and Si mapping. Particle sizes were below 100 nm. The hybrids were nanocomposites. The char yield of pure epoxy resin was 14.8 wt.% and that of modified epoxy nanocomposite was 31 wt.% at 800 °C. A higher char yield enhances the flame retardance. Values of limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively, indicating that modified epoxy nanocomposites possess better flame retardance than the pure epoxy resin.     

A bifunctional platinum(II) complex capable of intercalation and hydrogen-bonding interactions with DNA: binding studies and cytotoxicity

The interactions of [Pt(CNN)(4-dpt)]PF(6), (1; 4-dpt=2,4-diamino-6-(4-pyridyl)-1,3,5-triazine, HCNN=6-phenyl-2,2'-bipyridine) with double-stranded DNA, poly(dA-dT)(2), and poly(dG-dC)(2) were examined by spectroscopic, electrophoretic, and hydrodynamic methods. The spectroscopic data were analyzed with McGhee, van't Hoff, and Gibbs-Helmholtz equations. In a comparative study, [Pt(CNN)(py)]PF(6) (2; py=pyridine) was prepared and the nature of its binding towards DNA was investigated [preliminary results: ChemBioChem 2003, 4, 62-68]. For reactions with calf thymus DNA at 20 degrees C, the intrinsic binding constants for 1 and 2 are (4.6+/-0.2)x10(5) and (2.3+/-0.3)x10(4) mol(-1) dm(3), respectively. Results of DNA-binding reactions revealed that 1 and 2 preferentially bind to the AT sequence of duplex DNA. Intercalation is the preferred binding mode for 2, whereas both intercalation and minor-groove binding are observed for 1. Complex 1 is cytotoxic against a number of carcinoma cell lines, including KB-3-1, CNE-3, and HepG2, and remains potent against multidrug- or cisplatin-resistant KB-V-1 and CNE1 cell lines, for which the resistance ratios are 1.6 and 1.5, respectively. Importantly, 1 is almost an order of magnitude less toxic to the normal cell line CCD-19Lu (IC(50)=176+/-1.7 microM) and it selectively induced apoptosis leading to cancer cell death with less than 5 % detectable necrosis.     

Solution NMR determination of the seating(s) of meso-nitro-etioheme-1 in myoglobin: implications for steric constraints to meso position access in heme degradation by coupled oxidation

The highly stereoselective cleavage of hemin in myoglobin by coupled oxidation has been attributed to steric barriers that leave more space near the alpha- than the other meso-positions. The steric barriers near meso positions in myoglobin have been investigated by establishing the thermodynamics and dynamics of possible seatings in the pocket of horse myoglobin of a four-fold symmetric etioheme I modified with a bulky nitro group at a single meso position. The cyanomet complex of this reconstituted myoglobin exhibits three sets of (1)H NMR resonances that are linked dynamically and occur in approximate populations ratios of 0.82:0.10:0.08. Two dimensional (1)H NMR has been used to assign the hemin and heme pocket resonances in the major isomer in solution and to determine that the hemin is oriented with the nitro group at the canonical gamma-meso position of native hemin. The dominance of this isomer is attributed to the solvent exposure of this portion of the hemin which stabilizes the highly polar nitro group. Using a combination of magnetization transfer among methyl groups of the three isomers due to "hopping" of the hemin about its normal, the assigned resonances of an isoelectronic, bis-cyano complex of meso-nitro-etioheme I, and the known essentially constant rhombic perturbation of heme pocket sites on the hyperfine shifts of heme methyl (Kolczak, U.; Hauksson, J. B.; Davis, N. L.; Pande, U.; de Ropp, J. S.; Langry, K. C.; Smith, K. M.; LaMar, G. N. J. Am. Chem. Soc. 1999, 121, 835-843); the two minor isomers are shown to place their bulky nitro group at the canonical delta-meso (8%) and alpha-meso positions (10%). The comparable population of the isomers with nitro groups at the hydrophobic alpha- and delta-meso positions dictates that, while the static crystal structure finds more room near the alpha-meso position, the deformation at minimal energetic expense near the alpha- and delta-meso positions is comparable. These results argue that factors other than simple steric influences control the selectivity of the ring cleavage in myoglobin.