Cyclopalladated ferrocenylimine: a highly effective catalyst for the borylation/suzuki coupling reaction

The cyclopalladated ferrocenylimine was an efficient catalyst for the borylation/Suzuki coupling reaction. The catalytic loading for the reaction containing bromoarenes was 1 mol %. When iodobenzene was used, the catalytic loading was as low as 0.1 mol %. Furthermore, the cyclopalladated ferrocenylimine also exhibited excellent catalytic power in the case of substrates containing electron-donating substituents, with yields reaching 93% or higher.     

Over 18% binary organic solar cells enabled by isomerization of non-fullerene acceptors with alkylthiophene side chains

Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.

     

有机试剂结构与性质的研究XII有机试剂的pKa与改进的Swain－Lupton参数

有机试剂的ｐＫ０ａ是其重要的物化参数，它是有机试剂酸碱性的度量，决定其配合物的稳定性．根据Ｓｗａｉｎ－Ｌｕｐｔｏｎ的工作，每个取代基的效应可用两个参数：场／诱导效应参数与共振效应参数来描述．本文应用Ｈａｎｓｃｈ改进的参数值研究了ｐＫａ与取代基常数的相关性，建立了下式．ｐＫａ＝ｐＫ０ａ＋ｒ１Ｆ＋ｒ２Ｒ     

ZnCl2熔盐的分子动力学模拟

近年来，若干作者根据几种粒子间函数，对ZnCl2熔盐结构做过分子动力学模拟［1－3］其出的Zn－Cl和Cl－Cl离子间的偏径向分布函数与中子衍射实测值符合较好，但Zn－Zn离子间距以及Zn－Zn间配位数计算值多偏高．鉴于Busing势函数在多价卤化物馆盐的分子动力学计算中应用效果较好[4],我们试用Busing势函数为基础对ZnCl2熔盐结构和能量做分子动力学计算．1研究方法计算所用粒子势为Busing势函数此处，Zi为离子的电行数（ZZn。＋＝2，Zcl－＝1），几；是离子有效半径，人为＊离子的“硬度”参数·据文献问，f二0．005071，尸zn。十二0．…     

Well-defined star-shaped calcite crystals formed in agarose gels

Single crystals of calcite exhibiting a morphology of well-defined 8-armed stars, which evolved from original rhombohedral calcite crystals with their 8 points extending radially into eight arms, were produced by crystallization of CaCO3 in agarose gels.     

流动注射氢化物石墨炉原子吸收法的应用研究 Ⅰ.——实验装置与分析性能

氢化物石墨炉联用技术的原理是先在较低温度下将氢化物蒸气通入石墨炉并分解沉积于石墨管的内表面,然后再在高温下原子化。该法能明显提高灵敏度,消除液相和气相干扰。本文采用自制的半自动氢化物石墨炉进样系统及流动注射氢化物发生器,直接在普通石墨炉上进行氢化物石墨炉分析,研究了部分元素的测定条件,建立的方法操作方便,灵敏度高,耗样少,线性范围宽,是一种值得推广的新方法。     

大环烷构象

综述了40多年来大环烷构象的研究进展，将大环烷分为偶数和奇灵敏环分别对其构象研究进行讨论，得出大环烷构象的一般规律，并介绍了有关大环化合物构象的命名法则。     

一阶导数光谱K系数法同时测定硝基酚钠三组分

研究和建立了同时测定硝基酚钠混合三组份的新方法——一阶导数光谱K系数法。确定了最佳实验条件和测定波长,方法简便、快速、准确。通过对动植物细胞赋活增进剂中邻硝基酚钠、对硝基酚钠、5-硝基愈创木酚钠三组份的直接测定,其相对误差小于2%,相对标准偏差小于3%,回收率为99～103%。     

ICP—AES法测定玩具材料中痕量砷,硒,锑

用电感耦合等离子体原子发射光谱法（ＩＣＰ－ＡＥＳ０测定了玩具材料中的痕量砷，硒和锑。方法简便快速，回收率为９７．５％－１０２．７％，相对标准偏差小于３％。     

热处理对Nylon—11结构的影响

对不同温度热处理过的Nylon－11样品，采用广角X射线衍射（WAXD），根据X射线衍射强度理论，用多重峰图解分峰方法研究了Nylon－11结构的变化，并导出了计算Nylon－11结晶度的公式．所得结果与密度法、DSC法进行了比较．同时也给出了Nylon－11的有关热力学参数，