Simultaneous determination of cocaine and its metabolites with caffeine in rat serum microsamples by high-performance liquid chromatography

A single, isocratic high-performance liquid chromatographic method is described for the determination of cocaine and three of its metabolites along with caffeine in serum microsamples (50 microliters). The small sample size permits the tracking of pharmacokinetic data over time in individual, small animals. The method also was used to demonstrate that cocaine, benzoylecgonine and norcocaine in rat serum samples were stable for at least a month without the presence of sodium fluoride.     

Layer-by-layer assembled multilayer films of titanate nanotubes, Ag- or Au-loaded nanotubes, and nanotubes/nanosheets with polycations

Aqueous suspensions of hydrothermally synthesized titanate nanotubes and poly(diallyldimethylammonium chloride) (PDDA) have been employed to fabricate multilayer films on various substrates in a layer-by-layer fashion. Atomic force microscopy displays the dense coverage of the substrate surface by the nanotubes. UV-vis absorption spectroscopy confirms the consecutive growth of PDDA/nanotube layer pairs. Single crystalline Ag and Au nanoparticles with narrow size distribution spatially correlating with the nanotubes have been obtained by treating the nanotubes with AgNO(3) or HAuCl(4) aqueous solution followed by chemical reduction. The noble metal nanoparticles show a strong surface plasmon absorption band. A multilayer film construction of the noble-metal-loaded nanotubes has also been achieved. This process has been further extended to the heteroassembly of nanotubes/nanosheets in different layer sequences.     

Enhancement of three-photon absorption cross-sections in a novel class of symmetrical charge transfer fluorene-based molecules

The three-photon absorption effect (3PA) of two novel symmetrical charge transfer fluorene-based molecules (abbreviated as BASF and BMOSF) has been determined by using a Q-switched Nd:YAG laser pumped with 38 ps pulses at 1064 nm in DMF. The measured 3PA cross-sections are 84 × 10⁻⁷⁸ and 114 × 10⁻⁷⁸ cm⁶ s², respectively. The geometries and electronic excitations of these two molecules are systematically studied by PM3 and ZINDO/S methods. The relationships between 3PA cross-sections and intramolecular charge transfer are discussed micromechanically. The experimental and theoretical results have shown that the larger intramolecular charge transfer, which was characterized by the charge density difference between the ground state (S₀) and the first excited state (S₁), the greater enhancement of the 3PA cross-sections.     

Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

Crystal Structures of Lanthanum Complexes with Nitrobenzoic Acids

ＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｓｏｆＬａｎｔｈａｎｕｍＣｏｍｐｌｅｘｅｓｗｉｔｈＮｉｔｒｏｂｅｎｚｏｉｃＡｃｉｄｓ￥ＭａＪｉａｎ－Ｆａｎｇ;ＪｉｎＺｈｏｎｇ－Ｓｈｅｎｇ;ＮｉＪｉａ－Ｚｕａｎ（ＬａｂｏｒａｔｏｒｙｏｆＲａｒｅＥａｒｔｈＣｈｅｍｉｓｔ...     

Asymmetric Intramolecular Hydroalkoxylation of Unactivated Alkenes Catalyzed by Chiral N‐Triflyl Phosphoramide and TiCl4†

By using a combination of a chiral N‐triflyl phosphoramide and TiCl₄ as the catalyst, a new process for asymmetric intramolecular hydroalkoxylation of unactivated alkenes was developed, producing various chiral tetrahydrofuran derivatives in 51%—99% yields with 30%—71% ee's.     

L-赖氨酸锌兔体内生物利用度研究

用原子吸收分光光度法和氨基酸自动分析仪法分别测定兔血清锌浓度和血清L-赖氨酸含量．结果表明．L-赖氨酸锌中锌的相对生物利用度明显优于硫酸锌．而其中的L-赖氨酸的相对生物利用度与L-赖氨酸组比较无明显差异．     

Relationship between microhardness and fluorine contents on tooth enamel determined by PIGE analysis

The remineralization effect of fluoride has been measured by surface microhardness on tooth enamel. The purpose of this study was to investigate the relationship between microhardness and fluorine concentration on tooth enamel. Twelve sound bovine enamel specimens were prepared and immersed in 0.05% NaF solution for 1, 3, 6, 24 and 36 hours, respectively. The concentration of fluorine in specimens were measured by PIGE analysis and surface microhardness of each specimen was measured by surface microhardness tester. Fluorine concentration was increased by immersing time. There was no change in microhardness of each specimen by fluorine content. The results of this study suggest that there was no relationship between the fluorine concentration and surface microhardness in sound tooth enamel. PIGE analysis can be used effectively to assess the remineralization effect of fluorine content in tooth enamel.     

Mechanism of TiO2-assisted photocatalytic degradation of dyes under visible irradiation: photoelectrocatalytic study by TiO2-film electrodes

Photoelectrocatalytic degradation of various dyes under visible light irradiation with a TiO(2) nanoparticles electrode has been investigated to reveal the mechanism for TiO(2)-assisted photocatalytic degradation of dyes. The degradation of both cationic and anionic dyes at different biases, including the change in the degradation rate of the dyes and the photocurrent change with the bias potential, the degraded intermediates, the voltage-induced adsorption of dyes, the accumulation of electrons in the TiO(2) electrode, the effect of various additives such as benzoquinone (BQ) and N,N-dimethyl aniline (DMA), and the formation of active oxygen species such as O(2)(*-) and H(2)O(2) were examined by UV-visible spectroscopy, HPLC, TOC, and spin-trap ESR spectrometry. It was found that the dyes could controllably interact with the TiO(2) surface by external bias changes and charging of dyes. The cationic dyes such as RhB and MG underwent efficient mineralization at negative bias, but the N-dealkylation process predominated at positive bias under visible light irradiation. The discolorations of the anionic dyes SRB and AR could not be accelerated significantly at either negative or positive bias. At a negative bias of -0.6 V vs SCE, O(2)(*-) and dye(*+) were formed simultaneously at the electrode/electrolyte interface during degradation of cationic RhB. In the case of anionic dyes, however, it is impossible for the O(2)(*-) and dye cationic radical to coexist at the electrode/electrolyte surface. Experimental results imply both the superoxide anionic radical and the dye cationic radical are essential to the mineralization of the dyes under visible light-induced photocatalytic conditions.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.