Relationship between microhardness and fluorine contents on tooth enamel determined by PIGE analysis

The remineralization effect of fluoride has been measured by surface microhardness on tooth enamel. The purpose of this study was to investigate the relationship between microhardness and fluorine concentration on tooth enamel. Twelve sound bovine enamel specimens were prepared and immersed in 0.05% NaF solution for 1, 3, 6, 24 and 36 hours, respectively. The concentration of fluorine in specimens were measured by PIGE analysis and surface microhardness of each specimen was measured by surface microhardness tester. Fluorine concentration was increased by immersing time. There was no change in microhardness of each specimen by fluorine content. The results of this study suggest that there was no relationship between the fluorine concentration and surface microhardness in sound tooth enamel. PIGE analysis can be used effectively to assess the remineralization effect of fluorine content in tooth enamel.     

Mechanism of TiO2-assisted photocatalytic degradation of dyes under visible irradiation: photoelectrocatalytic study by TiO2-film electrodes

Photoelectrocatalytic degradation of various dyes under visible light irradiation with a TiO(2) nanoparticles electrode has been investigated to reveal the mechanism for TiO(2)-assisted photocatalytic degradation of dyes. The degradation of both cationic and anionic dyes at different biases, including the change in the degradation rate of the dyes and the photocurrent change with the bias potential, the degraded intermediates, the voltage-induced adsorption of dyes, the accumulation of electrons in the TiO(2) electrode, the effect of various additives such as benzoquinone (BQ) and N,N-dimethyl aniline (DMA), and the formation of active oxygen species such as O(2)(*-) and H(2)O(2) were examined by UV-visible spectroscopy, HPLC, TOC, and spin-trap ESR spectrometry. It was found that the dyes could controllably interact with the TiO(2) surface by external bias changes and charging of dyes. The cationic dyes such as RhB and MG underwent efficient mineralization at negative bias, but the N-dealkylation process predominated at positive bias under visible light irradiation. The discolorations of the anionic dyes SRB and AR could not be accelerated significantly at either negative or positive bias. At a negative bias of -0.6 V vs SCE, O(2)(*-) and dye(*+) were formed simultaneously at the electrode/electrolyte interface during degradation of cationic RhB. In the case of anionic dyes, however, it is impossible for the O(2)(*-) and dye cationic radical to coexist at the electrode/electrolyte surface. Experimental results imply both the superoxide anionic radical and the dye cationic radical are essential to the mineralization of the dyes under visible light-induced photocatalytic conditions.     

手性双氨基醇-Et2Zn催化的不对称直接羟醛缩合反应

以1,3-二溴丙酮和(2'S)-(二苯基羟甲基)-四氢吡咯为原料,合成了两种新型手性氨基醇1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]丙酮(3)和1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]-2-丙醇(4),总产率分别为39%和35%.手性双氨基醇3-/4-Et2Zn可催化未修饰醛、酮的不对称直接羟醛缩合反应,对映体过量最高9%.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Some applications of gel-permeation chromatography in investigations of structure and the solution properties of radical-initiated poly(vinyl chloride)

The applicability of the published universal calibration parameters for gel-permeation chromatography on polystyrene standards and poly(vinyl chloride) samples with a defined structure has been compared. It was shown experimentally that of several theoretically possible molecular weight averages attributed to the elution volume at the position of the peak maximum, the root mean-square average molecular weight M _Rms = (M _wM _n)^0.5 shows the best accordance. The molecular weights obtained by gel-permeation chromatography were compared with those determined by viscometry, osmometry, and the light-scattering method. The reproducibility of gel-permeation chromatography measurements is 3%, and the average variance of the results as compared with results obtained by the above methods is about 8%. It was also found that the gel-permeation chromatography does not involve any anomalies interfering with results obtained by other methods.     

Polyacrylate/silica nanocomposite materials prepared by sol-gel process

Polyacrylate/silica nanocomposite was prepared by sol-gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), γ-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanocomposite was investigated in details. Dynamics Laser Scattering (DLS) indicated that the average diameter of the polyacrylate/silica latex particles (177 nm) was bigger than that of the pure polyacrylate latex particles (105.3 nm), but the ζ potential of polyacrylate/silica was decreased respectively in contrast to that of the polyacrylate. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature of polyacrylate/nano-SiO₂ (T_g = −24 °C) was higher than that of polyacrylate (T_g = −36 °C). UV analysis showed that the UV absorbency of polyacrylate/silica was improved evidently in contrast to that of polyacrylate.     

242-260nm波长区CS2分子的多光子解离电离

在242－260nm波氏范围通过CS2分子的共振增强多光子电离（REMPI）获得了母体离子CS和碎片离子的分质量激发谱．在λ＜246.4nm区间，CS激发谱上呈现出来源于CS2双光子电离的弥散谱带,碎片离子激发谱的归属强烈提示多光子过程中有中性基电子态的CS和S（经由CS2的光解离）产生：（1）CS 的谱带主要来源于中性CS碎片经由单光子跃迁产生的（1＋1）共振增强电离，（2）除了部分S 的谱峰来自CS 的光解外，多数S 的锐谱峰来自中性S原子经由3p3（2D0）4p，3p3（4S0）np（n＝6，7，8）←3p43pJ（J＝2，1,0）双光子跃迁产生的（2＋1）共振增强电离．     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Generalization of Lagrangian dynamics

We speculate on a generalized dynamics described by an integral over action functionals that is a generalization of the standard functional integral. In a simple Gaussian case we obtain a certain differential equation for the measure of Feynman integral. We prove that the equation is satisfied for the spin zero field in one space-time dimension.