Relationship between Dispersive Surface Tension and Density and Molecular Weight of Solvents and Polymers

The surface and interfacial properties of polymers are important for their applications. Generally, the surface property is quantitatively characterized by the surface tension or surface tension component parameters, which are obtained with the contact angle technique. However, the contact angle technique has an inherent problem, contact angle hysteresis phenomenon, which will result in many incredible surface tension data. In order to find a simple and easy method to estimate the rationality of a surface tension result, the relationship between dispersive surface tension component and density and molecular weight is researched in this work. It is found that for 30 organic solvents, there is a good relationship between the dispersive surface tension r^d and the parameter . In addition, for 12 polymers, when the molecular weight is replaced with the molecular weight of the repeat unit, there is still the same relationship as for small liquids. However, because it is difficult to judge the accuracy of the published dispersive data of the polymers, the found experiential relationship needs further confirmation, requiring more reliable published data.     

Control of gain and thermal carrier loss profiles for mode optimization in 980-nm broad-area vertical-cavity surface-emitting lasers

Optical gain and thermal carrier loss distributions regarding current diffusion and various electric contact areas are investigated to improve the near-field modes from the ring-shape to a Gaussian-like configuration for extra-broad-area and oxide-confined vertical-cavity surface-emitting lasers. In this work an equivalent circuit network model is used. The resistance of the continuously-graded distributed Bragg reflectors （DBRs）, the current diffusion and the temperature effect due to different electric-contact areas are calculated and analyzed at first, as these parameters affect one another and are the key factors in determining the gain and thermal carrier loss. Finally, the gain and thermal carrier loss distributions are calculated and discussed.     

Cu/HMOR催化二甲醚羰基化合成乙酸甲酯: 催化剂制备方法的影响 (cited: 2)

采用氨蒸发法、尿素水解法、离子交换法及浸渍法制备HMOR负载的Cu催化剂, 考察其催化二甲醚(DME)羰基化合成乙酸甲酯(MA)性能. 结果表明离子交换法制得Cu/HMOR催化剂在Cu的金属中心和酸性分子筛载体的共同作用下具有较好催化反应活性. 在210 oC、1.5 MPa、空速4883 h^-1,DME转化率为95.3%,MA选择性为94.9%. 对催化剂进行N2物理吸附、X射线衍射、NH₃程序升温脱附和CO程序升温脱附等表征发现,离子交换法制得Cu/HMOR催化剂具有较高比表面、大量弱酸及一定中强酸、适中的CO吸附强度,提高了CO插入DME羰基化反应活性.     

一维锰氧化物纳米棒在以O2为氧源的苯甲醇氧化反应中的催化性能

采用水热法合成MnOOH一维纳米线,通过MnOOH在不同气氛和温度中煅烧得到尺寸和形貌相似的不同锰氧化物,并用于以O₂为氧源的苯甲醇液相氧化反应. 结果表明,MnO₂对苯甲醇氧化反应具有较高的催化活性. 通过XPS、SEM、TEM和H₂-TPR等手段对催化剂的形貌和结构进行了表征,并讨论了可能影响反应活性的一些因素. MnO₂的良好催化性能可能与其晶格氧具有较高的迁移率以及氧化还原能力有关. 通过简单的焙烧处理,可以使MnO₂催化剂在苯甲醇氧化反应中具有良好的重复使用性.     

基于多重散射强度和偏振特征的舰船尾流气泡激光探测方法

研究多重散射效应对舰船尾流气泡群光散射强度和偏振特征的影响是舰船光尾流探测以及新型光自导鱼雷研究的基础. 基于矢量Monte Carlo方法建立了舰船尾流气泡群激光后向探测仿真模型, 重点研究了尾流气泡群的多重散射机理,分析了多重散射效应、尾流气泡群密度对回波信号强度和偏振特征的影响规律. 基于粒子碰撞重要性抽样的基本思想, 在传统能量接收方法的基础上, 提出了回波光子偏振贡献接收方法和回波信号偏振信息统计方法, 解决了小视场系统光子返回概率低无法形成回波能量的难题. 构建了模拟尾流气泡群激光散射强度和偏振探测实验平台, 从实验的角度验证了模拟结果的准确性. 实验和模拟结果的一致性表明, 利用回波强度、偏振信息可表征气泡群距离、密度信息, 从而可对舰船尾流特别是低密度尾流进行高精度的探测和辨识. 关键词： Monte Carlo 偏振 多重散射 气泡     

CVD金刚石中的氮对等离子体刻蚀的影响

采用非对称磁镜场电子回旋共振等离子体分别对沉积过程中掺氮和未掺氮的化学气相沉积金刚石膜进行了刻蚀研究, 结果表明: 掺氮制备的金刚石膜的刻蚀主要集中在晶棱处, 经过4h刻蚀后其表面粗糙度由刻蚀前的4.761 μm下降至3.701 μm, 刻蚀对金刚石膜的表面粗糙度的影响较小; 而未掺氮制备的金刚石膜的刻蚀表现为晶面的均匀刻蚀, 晶粒坍塌,刻蚀4h后其表面粗糙度由刻蚀前的3.061 μm下降至1.083 μm. 刻蚀导致表面粗糙度显著降低. 上述差别的主要原因在于金刚石膜沉积过程中掺氮导致氮缺陷在金刚石晶棱处富集, 晶棱处电子发射加强, 引导离子向晶棱运动并产生刻蚀, 从而加剧晶棱的刻蚀. 而未掺氮金刚石膜,其缺陷相对较少且分布较均匀 ,刻蚀时整体呈现为 (111) 晶面被均匀刻蚀继而晶粒坍塌的现象. 关键词： 掺氮 金刚石膜 刻蚀 非对称磁镜场     

Cr4+掺杂Li1.14Zn1.43SiO4透明微晶玻璃近红外宽带光谱特性

采用高温熔融法和热处理制备了Cr⁴⁺掺杂Li_1.14Zn_1.43SiO₄微晶玻璃, 探讨了不同热处理温度下样品的物相、微观形貌及发光性能. 结果表明: 580℃热处理2h得到的微晶玻璃, Li_1.14Zn_1.43SiO₄微晶的粒径约为5nm, 在808nm的二极管激发下, 可观察到中心波长位于1226nm, 半高宽为230nm的近红外宽带发射峰, 荧光寿命约为200.73±1.71μs. 随着热处理温度的升高, Cr⁴⁺离子所处的晶体场环境发生了变化, 且可以观察到样品吸收光谱发生微弱的蓝移, 而荧光光谱发生少量的红移, 分析了晶体场环境变化对样品发光性能的影响. 关键词： 铬离子 微晶玻璃 超宽带发光 晶体场     

Effect of dispersion degree of orientation on dielectric properties of (100)-oriented PST thin film

(100) Oriented (Pb_xSr_1−x)TiO₃ (PST) thin films were prepared on indium tin oxide coated glass substrates by sol–gel technique with rapid thermal processing. The dielectric permittivity and tunability of the thin films with different dispersion degrees of orientation were investigated in detail by characterizing the full width at half maximum of their (100) peak based on rocking curves at different annealing temperatures. Influence of orientation dispersion on dielectric properties was exhibited in the tunable dielectric thin films. It shows that the dielectric constant and hence the tunability of the sol–gel derived PST thin films are improved with the decrease in the dispersion degree of orientation of the perovskite phase other than the increase in the content of crystalline phase in the thin films. The dielectric constant (capacitance) and figure of merit of the oriented thin films are 3–6 times and 1 times higher than that of randomly oriented thin film respectively.     

Four distributed feedback laser array integrated with multimode-interference and semiconductor optical amplifier

Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback (DFB) lasers using varied ridge width with a 4×1-multimode-interference (MMI) optical combiner and a semiconductor optical amplifier (SOA) is demonstrated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio (SMSR) exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.