Wave reflection at a free interface in an anisotropic pyroelectric medium with nonclassical thermoelasticity

In this paper, the well-established two-dimensional mathematical model for linear pyroelectric materials is employed to investigate the reflection of waves at the boundary between a vacuum and an elastic, transversely isotropic, pyroelectric material. A comparative study between the solutions of (a) classical thermoelasticity, (b) Cattaneo–Lord–Shulman theory and (c) Green–Lindsay theory equations, characterised by none, one and two relaxation times, respectively, is presented. Suitable boundary conditions are considered in order to determine the reflection coefficients when incident elasto–electro–thermal waves impinge the free interface. It is established that, in the quasi-electrostatic approximation, three different classes of waves: (1) two principally elastic waves, namely a quasi-longitudinal Primary (qP) wave and a quasi-transverse Secondary (qS) wave; and (2) a mainly thermal (qT) wave. The observed electrical effects are, on the other hand, a direct consequence of mechanical and thermal phenomena due to pyroelectric coupling. The computed reflection coefficients of plane qP waves are found to depend upon the angle of incidence, the elastic, electric and thermal parameters of the medium, as well as the thermal relaxation times. The special cases of normal and grazing incidence are also derived and discussed. Finally, the reflection coefficients are computed for cadmium selenide observing the influence of (1) the anisotropy of the material, (2) the electrical potential and (3) temperature variations and (4) the thermal relaxation times on the reflection coefficients.     

Liquid–liquid extraction of neodymium (III) and europium (III) using synergic mixture of furosemide and tribenzylamine in benzyl alcohol

The extraction behavior of Nd(III) and Eu(III) with 0.05 mol dm⁻³ furosemide in benzyl alcohol as single acidic extractant and then with equimolar (0.05 mol dm⁻³) synergic mixture of furosemide as acidic extractant and tribenzylamine as neutral donor in benzyl alcohol has been studied from aqueous solutions of pH 1 to 6. The effect of various parameters and of various cations and anions on the extraction of these metal ions was investigated. The composition of the extracted adducts was determined by slope analysis method that came out to be [(M(FS)₂)⁺ (CH₃COO)⁻] and [M(FS)₃·3TBA] where M = Nd(III) and Eu(III).

     

Characterization of Various Air Plasma Discharge Modes in Contact with Water and Their Effect on the Degradation of Reactive Dyes

Plasma Chemistry and Plasma Processing - Plasma in- or in-contact-with liquid is an emerging technology that has high potential for use in liquid treatment applications. Due to the simultaneous...     

Spectroscopic Study of Solvent Polarity on the Optical and Photo-Physical Properties of Novel 9,10-bis(coumarinyl)anthracene

Novel 7,7′-((anthracene-9,10-diylbis(methylene))bis(oxy))bis(4-methyl-2H-chromen-2-one) (BisCA) was prepared as fluorescent probe. The chemical structure of the novel BisCA was confirmed by spectroscopic data as well as elemental analyses. The solvatochromic characteristics of the new proble and its precursors were investigated in different solvents including, ethanol, DMF and toluene as protic polar, aprotic polar and non-polar solvents, respectively. Photo-physical parameters of probes, such as fluorescence quantum yields, fluorescence lifetime of excited state, radiative and non-radiative decay, were assessed in different media. The intermolecular H-bond effect on absorption and excitation spectra of the novel probe was reported in different solvents. Also, Onsager cavity radius and dipole moment of ground state and excited state of the probe were calculated as described by Bakhshiev and Reichardt methods.     

The Use of Porous Fins for Heat Transfer Augmentation in Parallel-Plate Channels

In this study, a steady, fully developed laminar forced convection heat augmentation via porous fins in isothermal parallel-plate duct is numerically investigated. High-thermal conductivity porous fins are attached to the inner walls of two parallel-plate channels to enhance the heat transfer characteristics of the flow under consideration. The Darcy–Brinkman–Forchheimer model is used to model the flow inside the porous fins. This study reports the effect of several operating parameters on the flow hydrodynamics and thermal characteristics. This study demonstrates, mainly, the effects of porous fin thickness, Darcy number, thermal conductivity ratio, Reynolds number, and microscopic inertial coefficient on the thermal performance of the present flow. It is found that the highest Nusselt number is achieved at fully filled porous duct which requires the highest pumping pressure. The results show that using porous fins requires less pumping pressure with comparable high heat augmentation weight against fully filled porous duct. It is found that higher Nusselt numbers are achieved by increasing the microscopic inertial coefficient (A), the Reynolds number (Re), and the thermal conductivity of the porous substrate k ₂. The results show that heat transfer can be enhanced (1) with the use of high thermal conductivity fins, (2) by decreasing the Darcy number, and (3) by increasing microscopic inertial coefficient.     

Effects of silver nanoparticles towards the efficiency of organic solar cells

We report an alternative approach to enhance the optical and electrical performance of a vanadyl 2,9,16,23-tetraphenoxy-29H,31H-phthalocyanine:poly(3hexylthiophene) (VOPcPhO:P3HT) blending system by integrating plasmonic spherical silver into an active layer of organic solar cells. Studies of the influence of the size distribution and optical properties of the silver nanoparticles were carried out using UV–Vis spectroscopy and field emission scanning electron microscopy, respectively. Electrical characteristics with and without the presence of metallic nanostructures were analyzed using J–V characteristics to observe the plasmonic effects on the performance in the VOPcPhO:P3HT organic solar cells.     

Positive-ion mass spectra and collision-induced dissociation of some 2,3-didehydro amino acids

The positive-ion mass spectra of a number of didehydro amino acids, ionized by electron impact and/or thermospray, and collision-induced dissociation spectra taken at collision energies of a few electron volts and keV have been performed on multiple quadrupole and reversed geometry sector instruments. Observed differences in the mass spectra and in the fragmentation patterns are explained in terms of different isomeric structures, different internal excitation energies and different ion transit times between the ion source and the collision cell. Molecular ions of unhydrated amino acids are efficiently formed both by electron impact and thermospray, whilst molecular ions of the hydrated compounds are formed more efficiently by the latter technique. The present investigation demonstrates that the use of different ionization techniques combined with mass spectrometry/mass spectrometry measurements at different collision energies yields a wealth of information relevant to structural characterization of this important class of molecules.     

The Effect of Hemodialysis on Voice: An Acoustic Analysis

Because respiration is part of the well-coordinated process necessary for phonation, this study was conducted with the purpose of analyzing the effect of chronic hemodialysis on voice characteristics of patients with chronic renal failure. A total of 57 patients were recruited for the study, including 31 males and 26 females ranging in age from 16 to 85 years. Patients underwent evaluation of their voice directly before and after hemodialysis using the Kay Elemetric VISI Pitch (Model 330; Kay Elemetric Corporation, Lincoln Park, New Jersey). The vocal acoustic parameters studied include habitual pitch, pitch range, relative average perturbation, shimmer, noise-to-harmonic ratio, voice turbulence index, maximum phonation time, and voice energy. The data were analyzed using the paired t-test for the total sample and the nonparametric test for the female and male subgroups. The total sample analysis showed a statistically significant increase in the habitual pitch after the hemodialyis (p < 0.05), with a borderline increase in the pitch range and maximum phonation time (p < 0.10). In the female group, there was a statistically significant increase in the habitual pitch and a borderline increase in the relative average perturbation. In the male group, there was a significant increase in the habitual pitch with a borderline increase in maximum phonation time. Discussion of the after-mentioned results is presented.