The effect of magnetic field heat treatment on magnetostriction of Terfenol-D 2-2 composites

Based on the analysis of the magnetostriction for Terfenol-D composites, Terfenol-D 2-2 magnetostrictive composites have been prepared with laminations perpendicular to [1 1 2] axes. Then one of the samples was annealed in the vacuum at 423 K for 15 min at the magnetic field of 240 kA/m, which is along the direction of laminations and vertical to the [1 1 2] axes of the specimen. The static magnetostriction λ and dynamic magnetostrictive coefficient d₃₃ of samples were measured under the compressive stress of 0, 2, 4, 6 and 8 MPa. Effects of the compressive stress and the magnetic field heat treatment on the magnetostriction λ have been investigated. It is found that the magnetostriction of 2-2 composites can be improved under the compressive stress when the magnetic field is larger than 20 kA/m. The magnetostriction of 2-2 composites with the magnetic field heat treatment increases under compressive stress, and it can reach 1390×10⁻⁶ at the magnetic field of 200 kA/m and under the compressive stress of 4 MPa, much larger than the value of 860×10⁻⁶ without the magnetic field heat treatment. The highest magnetostriction of the 2-2 composite with the magnetic field heat treatment can reach 1530×10⁻⁶. The dynamic magnetostrictive coefficient d₃₃ of 2-2 composites with the magnetic field heat treatment have been improved, compared with that without magnetic field heat treatment. The maximum value of d₃₃ of the sample with magnetic field heat treatment is 71% larger than that without magnetic field heat treatment.     

CFD study on the magnetic fluid delivering in the vessel in high-gradient magnetic field

This paper simulated the advection and diffusion behaviors of the moving magnetic fluid in the vessel in the high-gradient magnetic field using Navier–Stokes equations. The particles accumulation behavior and the streamlines and the contour of concentration are all affected by the susceptibility, intensity of magnetic field and its gradient, and the flow velocity and also by the difference in size of vessels. The typical accumulation behaves as a solid obstacle in the flow as result of the competing between magnetic and fluid drag forces, and gives rise to a rigidly bound core region followed by a wash away region near the vessel boundary under the condition of 10 mm vessel in width. While the vessel is near 1 mm in width, the magnetic force is exerted almost on the whole vessel area, the vortex is not seen, the wash away area disappears and the concentration changes in the whole vessel. The results of the analysis provide meaningful information on ferrofluid transport and stabilization for various magnetic drug targeting and the magnetic fluid sealing, and other use in industrial and medical fields.     

Surface plasmon sensor with gold film deposited on a two-dimensional colloidal crystal

A sensor based on surface plasmon resonance (SPR) of plasmonic crystals fabricated via a colloidal-crystal-assisted templating method is studied. Plasmonic crystals are prepared by depositing a thin gold (Au) layer onto a two-dimensional array of polystyrene spheres self-assembled on a quartz substrate. The enhanced transmission as a result of the SPR of Au plasmonic crystals, which are immersed in different ambient liquids, are measured and compared with that of polystyrene (PS) microsphere templates of different sizes, both before and after removal of Au nanoprisms formed on the quartz substrate through pores among the spheres. It is found that the measured sensitivities exhibit a linear dependence on the refractive index of the surrounding medium and are linked to coupling effects between SPRs on the corrugated Au film and nanoislands. The feasibility of the SPR system in molecular monolayer detection is further demonstrated through a formation of alkanethiolate self-assembled monolayers on the Au film surface, which causes a 4 nm red-shift of the main SPR. PACS  07.07.Df; 73.20.Mf; 78.66.-w; 81.16.Dn     

Scaling law of anomalous Hall effect in Fe/Cu bilayers

The scaling of anomalous Hall resistivity on longitudinal resistivity has been intensively studied in different magnetic systems, including multilayer and granular films, to examine whether a skew scattering or a side jump mechanism dominates in the origin of anomalous Hall effect (AHE). The scaling law is based on the premise that both resistivities are a consequence of electron scattering by the imperfections in the materials. By studying the anomalous Hall effect in the simple Fe/Cu bilayers, it was demonstrated that the measured anomalous Hall effect should not follow the scaling laws derived from skew scattering or side jump mechanism due to the short-circuit and shunting effects of the non-magnetic layers.     

Synthesis of molybdenum silicide by both ion implantation and ion beam assisted deposition

Two groups of Mo/Si films were deposited on surface of Si(1 0 0) crystal. The first group of the samples was prepared by both ion beam assisted deposition (IBAD) and metal vapor vacuum arc (MEVVA) ion implantation technologies under temperatures from 200 to 400 °C. The deposited species of IBAD were Mo and Si, and different sputtering Ar ion densities were selected. The mixed Mo/Si films were implanted by Mo ion with energy of 94 keV, and fluence of Mo ion was 5 × 10¹⁶ ions/cm². The second group of the samples was prepared only by IBAD under the same test temperature range. The Mo/Si samples were analyzed by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), sheet resistance, nanohardness, and modulus of the Mo/Si films were also measured. For the Mo/Si films implanted with Mo ion, XRD results indicate that phase of the Mo/Si films prepared at 400 and 300 °C was pure MoSi₂. Sheet resistance of the Mo/Si films implanted with Mo ion was less than that of the Mo/Si films prepared without ion implantation. Nanohardness and modulus of the Mo/Si films were obviously affected by test parameters.     

In-situ control of different oxygen fugacity experimental study on the electrical conductivity of lherzolite at high temperature and high pressure

At pressure 1.0-4.0 GPa and temperature 1073-1423 K and under the control of oxygen fugacity (Mo+MoO₂, Fe+FeO and Ni+NiO), a YJ-3000t multi-anvil solid high-temperature and high-pressure apparatus and Solartron-1260 impedance/Gain-Phase analyzer were employed to analyze the electrical conductivity of lherzolite. The experimental results showed that: (1) within the range of the selected frequencies (10³-10⁶ Hz), either as viewed from the relationship between the real or imaginary part of complex impedance and the frequency, or from the relationship between modulus, phase angle and frequency, it can be seen clearly that the complex impedance has a strong dependence on frequency; (2) with the rise of temperature (T), the electrical conductivity (σ) increased, and Lg σ and 1/T follows the Arrhenius relationship; (3) with the rise of pressure, the electrical conductivity decreased, and activation enthalpy and temperature-independent pre-exponential factor decreased as well. And the activation energy and activation bulk volume of the main charge carrier in the lherzolite have been obtained for the first time, which are 1.68±0.02 eV and 0.04±0.01 cm³/mol, respectively; (4) under the given pressure and temperature, the electrical conductivity tends to increase with increasing oxygen fugacity, and under the given pressure, the activation enthalpy and pre-exponential factor tend to decrease with the rise of oxygen fugacity; (5) at 2.0 GPa and the control of the three solid buffers, Mo+MoO₂, Fe+FeO and Ni+NiO, the exponential factors of electrical conductivity variation range with oxygen fugacity are , and the theoretical model for the relationship between the electrical conductivity of lherzolite and the oxygen fugacity under high pressure has been established for the first time; (6) the electrical conduction mechanism of small polarons provides a reasonable explanation to the variation of conductivity of lherzolite with oxygen fugacity.     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.     

A three-scroll chaotic attractor

This Letter introduces a new chaotic member to the three-dimensional smooth autonomous quadratic system family, which derived from the classical Lorenz system but exhibits a three-scroll chaotic attractor. Interestingly, the two other scrolls are symmetry related with respect to the z-axis as for the Lorenz attractor, but the third scroll of this three-scroll chaotic attractor is around the z-axis. Some basic dynamical properties, such as Lyapunov exponents, fractal dimension, Poincaré map and chaotic dynamical behaviors of the new chaotic system are investigated, either numerically or analytically. The obtained results clearly show this is a new chaotic system and deserves further detailed investigation.     

Effective-field theory on the kinetic Ising model

As an analytical method, the effective-field theory (EFT) is used to study the dynamical response of the kinetic Ising model in the presence of a sinusoidal oscillating field. The effective-field equations of motion of the average magnetization are given for the square lattice (Z=4) and the simple cubic lattice (Z=6), respectively. The dynamic order parameter, the hysteresis loop area and the dynamic correlation are calculated. In the field amplitude h₀/ZJ-temperature T/ZJ plane, the phase boundary separating the dynamic ordered and the disordered phase has been drawn, and the dynamical tricritical point has been observed. We also make the compare results of EFT with that given by using the mean field theory (MFT).     

Simulation of cesium desorption behavior of porous nickel

Journal of Radioanalytical and Nuclear Chemistry - To achieve the application of artificial plasma technology in high technology, the desorption behavior of cesium metals with low ionization...