Synthesis,characterization and coordination chemistry of the new tetraazamacrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt

A new potentially hexadentate tetraazamacrocycle based on the cyclen skeleton has been synthesized and fully characterized. The macrocycle 4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-bis(methanephosphonic acid monoethyl ester) dipotassium salt (Me2DO2PME) contains mutually trans monoethyl ester phosphonate acid substituents on two nitrogen atoms, and trans methyl substituents on the other two nitrogen atoms. The protonation constants of this macrocycle and the stability constants of its complexes with Cu2+, Zn2+, Gd3+ and Ca2+ ions have been determined by pH potentiometric titrations. The protonation sequence of the macrocycle has been studied by 1H, 31P[1H] and 13C[1H] NMR spectroscopy: the first and second protonation steps take place at the methyl-substituted nitrogen atoms, while the third protonation involves one oxygen from a phosphonate group. Upon protonation, all the CH2 ring protons become magnetically inequivalent on the NMR time scale due to a slow conformational rearrangement, most likely occasioned by the formation of multiple hydrogen bonds within the macrocyclic ring. Me2DOPM forms neutral, mononuclear complexes with all the metals investigated. The presence of hydroxo complexes was observed for Ca2+ and Zn2+ at high pH values. Structural information on the neutral complex [Cu(Me2DO2PME)] has been obtained by a solution X-Band EPR study. It is proposed that Me2DO2PME binds Cu2+ in a distorted octahedral structure using all of its donor atoms, i.e. the four nitrogen atoms and the two phosphonate oxygen atoms. The redox chemistry of [Cu(Me2DO2PME)] in dimethyl sulfoxide and water has been studied by electrochemical measurements. Cyclic voltammetry in DMSO shows the complex to undergo a quasireversible one-electron reduction step leading to an unstable CuI species.     

Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

Analysis of saccharides in beer samples by flow injection with electrospray mass spectrometry

Saccharides in foods play important roles, as they are essential substrates for fermentation processes. In brewing, the concentration of maltooligosaccharides influences the characteristics of beers and therefore their determination is of great practical interest. Electrospray ionization mass spectrometry (ESI-MS) was applied to identify and characterise maltooligosaccharides in beer samples. The effects due to different cation concentrations and dilution of samples were studied. Furthermore, quantitative analyses of maltooligosaccharides by means of flow-injection ESI-MS (FI/ESI-MS) of 1-microL beer samples (diluted 1000-fold) are described.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Chemometric interpretation of pesticide occurence in soil samples from an intensive horticulture area in north Portugal

An extensive monitoring programme of pesticides was carried out in soil samples from an intensive horticulture area in north of Portugal, putting into practice the needs for increased control of soil quality as far as organic pollution is concerned. The area under investigation was additionally defined as vulnerable to nitrates due to local soil and aquifer characteristics, which might be extended to pesticides contamination. Five sampling sites were selected and soils analysed at three depths in eight sampling campaigns, for the period of 2 years. A stepwise multivariate statistical approach was selected to uncover most relevant patterns inside a complex environmental data matrix. Cluster analysis was applied both to group pesticides and samples, giving a primary and unsupervised overlook of privileged relationships. Clusters of persistent pesticides and selected herbicides were identified, whereas sample classes were also formed and disposed geographically. Thirty eight percent of analysed soils samples fell into one class characterized by low contamination (class 1 in cluster analysis), which is entirely representative of the sampling site no. 1. Afterwards, linear discriminant analysis was applied to identify those pesticides, which had a higher impact in the definition of classes. Finally, factor analysis using a five component model was implemented in order to bring to light the constitution and data variance explained by each of the five main principal components, as well as, their relation to pest management practices. A factor was identified (PC1 – 22% variance) composed of chlorinated pesticides, which was representative of one of the investigated sites indicating its high contamination status. Qualitative main findings and class average concentration values were obtained through this multivariate statistical approach.     

A more convenient and general procedure for O-monobenzylation of diols via stannylenes: a critical reevaluation of the Bu2SnO method

A more consistent, straightforward, and economical protocol for generation of stannylene species and their reaction with BnBr leading to products of O-monobenzylation of diols has been set. It has shown to be specially indicated for substrates bearing vicinal trans 1,2-diol moieties on cyclohexane backbones, which are more resistant to these transformations. Such protocol has been successfully applied to myo-inositol derivatives and acyclic diols.     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002