Synthesis,structural characterization and reactivity of copper(I)-nitrile complexes: Crystal and molecular structure of [Cu(BzCN)4][BF4]

Complexes of general formula [CuL₄][BF₄] (L = benzonitrile – PhCN 2 or phenylacetonitrile – BzCN 3) have been prepared and structurally characterized by NMR spectroscopy and X-ray crystallography. Their structure and reactivity have been compared to the well known [Cu(MeCN)₄][BF₄] (1). The ⁶³Cu line width and the ⁶³Cu chemical shift have been evaluated by varying the temperature and the concentration of the complex 2 in benzonitrile solutions. The phenylacetonitrile solutions of the complex 3 give extremely broad signals which are beyond detection. Accordingly, compound 3 has been studied by ⁶³Cu MAS NMR spectroscopy. The solution NMR data are consistent to the prevalence of dynamic equilibrium between tetra- and low-coordinated species in both complexes. The X-ray structure of 3 revealed that the copper(I) atom sits in a slightly distorted tetrahedral geometry, surrounded by four BzCN ligands.     

Sub-optimal wavelet denoising of coaveraged spectra employing statistics from individual scans

This paper proposes a novel wavelet denoising method, which exploits the statistics of individual scans acquired in the course of a coaveraging process. The proposed method consists of shrinking the wavelet coefficients of the noisy signal by a factor that minimizes the expected square error with respect to the true signal. Since the true signal is not known, a sub-optimal estimate of the shrinking factor is calculated by using the sample statistics of the acquired scans. It is shown that such an estimate can be generated as the limit value of a recursive formulation. In a simulated example, the performance of the proposed method is seen to be equivalent to the best choice between hard and soft thresholding for different signal-to-noise ratios. Such a conclusion is also supported by an experimental investigation involving near-infrared (NIR) scans of a diesel sample. It is worth emphasizing that this experimental example concerns the removal of actual instrumental noise, in contrast to other case studies in the denoising literature, which usually present simulations with artificial noise. The simulated and experimental cases indicate that, in classic denoising based on wavelet coefficient thresholding, choosing between the hard and soft options is not straightforward and may lead to considerably different outcomes. By resorting to the proposed method, the analyst is not required to make such a critical decision in order to achieve appropriate results.     

Characterization of titanium dioxide nanoparticles dispersed in organic ligand solutions by using a diffusion-ordered spectroscopy-based strategy

Diffusion-ordered NMR spectroscopy (DOSY NMR) is presented as a tool for the determination of the diffusion coefficients of organic ligands in suspensions of titanium dioxide nanoparticles. The nanoparticles were prepared by a sol-gel process by hydrolysis and condensation reactions of titanium tetra-n-butoxide in the presence of pentane-2,4-dione (acacH: acetylacetone), as well as para-toluenesulfonic acid (pTsA) and n-butanol (nBuOH). NMR spectroscopic studies were performed in various deuterated solvents, on both dispersed xerosols and diluted sols. The bipolar-pulsed field gradient longitudinal eddy-current delay (LED) pulse sequence was used for data acquisition. The data were processed by inverse Laplace transformation (ILT), by using a maximum entropy algorithm, to afford 2D DOSY spectra. Different diffusion regimes for organic ligands in the bound and unbound states were successfully discriminated, more particularly in [D3]acetonitrile, thus allowing assessment of their interactions with the nanoparticles.     

Electrochemical and spectroscopic characterisation of amphetamine-like drugs: application to the screening of 3,4-methylenedioxymethamphetamine (MDMA) and its synthetic precursors

A complete physicochemical characterisation of MDMA and its synthetic precursors MDA, 3,4-methylenedioxybenzaldehyde (piperonal) and 3,4-methylenedioxy-β-methyl-β-nitrostyrene was carried out through voltammetric assays and Raman spectroscopy combined with theoretical (DFT) calculations. The former provided important analytical redox data, concluding that the oxidative mechanism of the N-demethylation of MDMA involves the removal of an electron from the amino-nitrogen atom, leading to the formation of a primary amine and an aldehyde. The vibrational spectroscopic experiments enable to afford a rapid and reliable detection of this type of compounds, since they yield characteristic spectral patterns that lead to an unequivocal identification.Moreover, the rational synthesis of the drug of abuse 3,4-methylenedioxymethamphetamine (MDMA or “ecstasy”) from one of its most relevant precursors 3,4-methylene-dioxyamphetamine (MDA), is reported. In addition, several approaches for the N-methylation of MDA, a limiting synthetic step, were attempted and the overall yields compared.     

Thalidomide analogs from diamines: Synthesis and evaluation as inhibitors of TNF-alpha production

Fourteen thalidomide analogs bearing two phthalimido units were prepared in high yields (83-94%) by condensation of different diamines with phthalic or 3-nitrophthalic anhydride. An in vitro investigation of the compounds as inhibitors of the TNF-alpha production was performed. The inhibition was higher for compounds bearing amino and nitro groups and was modulated by increasing the size of the spacers between the phthalimide groups.     

Regiospecific synthesis of trichloromethyl substituted 4,5‐dihydro‐1h‐1‐tosylpyrazoles

The regiospecific synthesis of a new series of eight 3‐alkyl(aryl)‐5‐hydroxy‐5‐trichloromethyl‐4,5‐dihydro‐1H‐1‐tosylpyrazoles is reported. The 1‐p‐tosyl‐2‐pyrazolines were obtained from the cyclocondensation reaction of 4‐alkyl(aryl)‐4‐alkoxy‐1,1,1‐trichloroalk‐3‐en‐2‐ones, [where alkyl = H, Me and aryl = ‐C₆H₅, 4‐CH₃C₆H₄, 4‐OCH₃C₆H₄, 4‐FC₆H₄, 4‐ClC₆H₄, 4‐BrC₆H₄,] with p‐tosylhydrazine in 64 to 92 % yields, employing anhydrous toluene at reflux or diethyl ether at room temperature as the reaction condition.     

Rheological characterisation of bis-urea based viscoelastic solutions in an apolar solvent

The rheological properties of hydrogen bonded reversible aggregates in apolar solvent have been investigated. The zero shear viscosity, the plateau modulus and the terminal viscoelastic relaxation time exhibit power laws dependencies with the concentration that have been compared with the behaviours expected for reversible polymers. It appears that the dynamics originate from scission/recombination mechanisms. Moreover, the growth of the aggregates with concentration follows the laws observed and predicted for worm-like micelles at low concentrations allowing the length of the aggregates to be estimated 500 nm at 3 g L(-1). However, at the highest concentrations investigated, deviations from the power laws suggest the presence of some intrinsic chain stopper poisons in the solutions.     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

FTIR Spectroscopy as a Tool to Study Age-Related Changes in Cardiac and Skeletal Muscle of Female C57BL/6J Mice

Studying aging is important to further understand the molecular mechanisms underlying this physiological process and, ideally, to identify a panel of aging biomarkers. Animals, in particular mice, are often used in aging studies, since they mimic important features of human aging, age quickly, and are easy to manipulate. The present work describes the use of Fourier Transform Infrared (FTIR) spectroscopy to identify an age-related spectroscopic profile of the cardiac and skeletal muscle tissues of C57BL/6J female mice. We acquired ATR-FTIR spectra of cardiac and skeletal muscle at four different ages: 6; 12; 17 and 24 months (10 samples at each age) and analyzed the data using multivariate statistical tools (PCA and PLS) and peak intensity analyses. The results suggest deep changes in protein secondary structure in 24-month-old mice compared to both tissues in 6-month-old mice. Oligomeric structures decreased with age in both tissues, while intermolecular β-sheet structures increased with aging in cardiac muscle but not in skeletal muscle. Despite FTIR spectroscopy being unable to identify the proteins responsible for these conformational changes, this study gives insights into the potential of FTIR to monitor the aging process and identify an age-specific spectroscopic signature.     

Improving description of hydrogen bonds at the semiempirical level: water–water interactions as test case

Hydrogen bonding is not well described by available semiempirical theories. This is an important restriction because hydrogen bonds represent a key feature in many chemical and biochemical processes, besides being responsible for the singular properties of water. In this study, we describe a possible solution to this problem. The basic idea is to replace the nonphysical gaussian correction functions (GCF) appearing in the core–core repulsion terms of most MNDO‐based semiempirical methods by a simple function exhibiting the correct physical behavior in the whole range of intermolecular separation distances. The parameterized interaction function (PIF) is the sum of atom‐pair contributions, each one having five adjustable parameters. In this work, the approach is used to study water–water interactions. The parameters are optimized to reproduce a reference ab initio intermolecular energy surface for the water–water dimer obtained at the MP2/aug‐cc‐pVQZ level. OO, OH, and HH parameters are reported for the PM3 method. The results of PM3‐PIF calculations remarkably improve qualitatively and quantitatively those obtained at the standard PM3 level, both for water–dimer properties and for water clusters up to the hexamer. For example, the root‐mean‐square deviation of the PM3‐PIF interaction energies, with respect to ab initio values obtained using 700 points of the water dimer surface, is only 0.47 kcal/mol. This value is much smaller than that obtained using the standard PM3 method (4.2 kcal/mol). The PM3‐PIF water dimer energy minimum (−5.0 kcal/mol) is also much closer to ab initio data (−5.0±0.01 kcal/mol) than PM3 (−3.50 kcal/mol). The method is therefore promising for the development of new semiempirical approaches as well as for application of combined quantum mechanics and molecular mechanics techniques to investigate chemical processes in water. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 572–581, 2000