Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.     

Exploring the self-assembly of dumbbell-shaped polyoxometalate hybrids,from molecular building units to nanostructured soft materials

The formation of hierarchical nanostructures using preformed dumbbell-like species made of covalent organic–inorganic polyoxometalate (POM)-based hybrids is herein described. In this system, the presence of charged subunits (POM, metal linkers, and counter ions) in the complex molecular architecture can drive their aggregation, which results from a competition between the solvation energy of the discrete species and intermolecular electrostatic interactions. We show that the nature of the POM and the charge of the metal linker are key parameters for the hierarchical nanoorganization. The experimental findings were corroborated with a computational investigation combining DFT and molecular dynamics simulation methods, which outlines the importance of solvation of the counter ion and POM/counter ion association in the aggregation process. The dumbbell-like species can also form gels, in the presence of a poorer solvent, displaying similar nanoorganization of the aggregates. We show that starting from the designed molecular building units whose internal charges can be controlled by redox trigger we can achieve their implementation into soft nanostructured materials through the control of their supramolecular organization.

The formation of hierarchical nanostructures using supramolecular dumbbell-like species made of organic–inorganic polyoxometalate-based hybrids is investigated by combination of SAXS and computational methods.     

An approach to channel type molecular structures. 1. Synthesis ofBouquet-shaped molecules based on an [18]-O6 polyether macrocycle

An approach to a transmembrane cation channel is described. It is based on the grafting of oxygen bearing side-chains on a macrocyclic polyether unit that constitutes the organizing core. The resulting species has a structure of overall bouquet shape. The synthesis of such a molecule . _M ⁰ ,14a is described, together with that of its analogue bearing polymethylene side-chains _M ^C ,14b. The physicochemical properties of these molecules indicate that they possess the features expected on the basis of their structure.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Laser–Induced Fluorescence Detection of Carbamates Traces in Water

The absorption and fluorescence spectra of carbaryl (CB), carbofuran (CF) and carbendazim (MBC) have been studied. Fluorescence lifetime and fluorescence quantum yields are also reported as well as the influence of pH, solvent and presence of humic acids on fluorescence. The limit of detection (LD) of the three compounds has been measured by direct analysis by laser-induced fluorescence (LIF) using a pulsed YAG laser with an Optical Parametric Oscillator (OPO) as excitation source and an Intensified Charged Coupled Device (ICCD) camera for the fluorescence detection. Instrumental LD found for CB, for MBC and for CF are respectively 4, 50 and 1000 ng L⁻¹. In tap water, the LD obtained is 800 ng L⁻¹ for MBC and 20,000 ng L⁻¹ for CF. For CB, the use of a time shift between excitation and emission allows to reach a LD of 20 ng L⁻¹ in tap water.     

The Vapor-Liquid Polycondensation of Cyclohexylphosphoric Dichloride with Hydroquinone

The vapor-liquid polycondensation of cyclohexylphosphoric dichloride with hydroquinone was investigated. The influence of the temperature, reaction time, base concentration, and molar ratio of reagents on the yield, inherent viscosity, and molecular weight of the obtained polymer was studied. Second order, central, composite, rotatable experimental design was used in order to carry out this work and to mark limits of the experimental field for optimal yields and high inherent viscosities.     

Two-Photon Absorption and Cell Imaging of Fluorene-Functionalized Epicocconone Analogues

Epicocconone 1 is a natural chromophore isolated from the fungus Epicoccum nigrum that has shown applications in proteomics and fluorescent microscopy thanks to its unique pro-fluorescence properties. The modification of the skeleton of the natural product by replacing the triene side chain by a fluorenyl scaffold can noticeably increase the fluorophore's absorption coefficient. The synthesis of the analogues of the natural product has been made possible by the use of a palladium-catalyzed carbonylation reaction, allowing the construction of the β-keto-dioxinone key intermediate. Two-photon absorption cross-section measurements of the fluorenyl epicocconone analogues show a structure dependency with values ranging from 60 to 280 GM and live cell imaging show intense staining of intracellular vesicle-like structures around the nucleus.     

Structure of the Polymer Obtained from Bisphenol-A and Cl 2 P(O)CH 3

Using the step-by-step build-up approach, the possible conformations of compound PhOP(O)(Me)OPh(Me) 2 Ph were constructed and geometrically optimized. Among the obtained structures 32 conformations belonging to low, comparable energy levels were used to construct the most stable dimers and tetramers of the title polymer. The results allowed us to estimate the geometrical structure of the polymer.     

Explanation of Anomalous Gas-Chromatographic (Gc) Behaviour in a Homologous Series of 2-Chloroethyl Phosphonic Acid Dialkyl Esters

Abstract

The study of GC separation of 2-chloroethylphosphonic acid di-n-alkyl (1–5 C atoms) esters (synthesised by us) on silicone stationary phases (OV-1, OV-17, OV-225) revealed a deviation from the expected linear dependence of retention indexes (RI) versus the number of C atoms of the alkyl chain: the first member of the series presents stronger retention than one can expect. This anomalous behaviour was observed especially on polar stationary phase (OV-225, see Figure l), and was emphasised with the increase of the column temperature. In an attempt to rationalise the above mentioned facts, we tried to relate the RI values to a global polarity parameter: the dipole moment, μ. The μ values for ClC₂H₄P(O)(OR)₂ were calculated by a method described in [1] (tested by comparing the calculated μ values with experimental ones for alkyl phosphonic acid dialkylesters), using molecular mechanics (COSMIC package) in the search of the conformational space, AM1 method (MOPAC 6.0) for the μ values of the conformers, and Boltzmann distribution for the global value (see Table I). At low temperature, the μ values are not related to the Kovats indexes. Those calculated at 200°C (column temperature range) demonstrate that, indeed, only in the case of the methyl derivative, the temperature rising led to a higher μ (enhanced population of the more polar conformers: ac position for the C-Ethyl group - ac for the Cl, μ ≈ 27 D, or ±ap for one R, μ ≈ 3.8 ÷ 4.3 D). It can be concluded that dipole-dipole forces contribute to the separation process of the first members of the series.     

Biomedical Implications of Polyphosphates

Abstract

The polyphosphates have the capacity of forming chelates with most of that metal cations[l]. Polyphosphatic complexes with trace- and macroelements art used as fodder additives for animals. In our experiments we studied the effect 01pyrophosphate (PP), tripolyphosphate (TPP) and hexametaphosphate (HMP), at different concentrations (0.909 mM, 1.8 I8 mM and 2.727 mM), on the enzymatic activity of carbonic anhydrase (CA), and the effect of polyphosphate chelates or the enzymatic activity of alkaline phosphatase (AP), both zincenzymes. The meta; ion, which can be dissociated in the presence of a chelating agent, is essential foi their catalytic activity 121. The presence of metal atoms as essential constituents of some enzymes, and the metal requirements of others for maximum activity, provide an obvious link between enzymatic reaction and coordination chemistry.