单分散聚苯乙烯微球的制备及影响因素研究

以聚乙烯吡咯烷酮为分散剂，无水乙醇为反应介质，偶氮二异丁腈为引发剂，采用分散聚合工艺，通过优化反应条件，制备出了粒径为5μm单分散（分散系数≤5％）聚苯乙烯微球。所制备的聚苯乙烯微球标准偏差δ＝0．16μm，分散系数ε＝0．02，且具有良好的球形度，表面非常光滑，无破损，无缺损。对影响单分散聚苯乙烯微球的因素进行了研究，结果表明：随着分散稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大。分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要因素。     

2,4,6-三硝基苯酚改性锆铝复合氧化物固定相分离富勒烯的色谱性能研究

制备了用于分离C60和C70的2，4，6－三硝基苯酚改性锆铝复合氧化物高效液相色谱固定相，考察了流动相中甲苯的含量、柱温及流速对C60和C70分离的影响，同时比较了酸腐蚀前后锆铝复合氧化物基质对分离的影响，结果表明，2，4，6－三硝基苯酚改性酸腐蚀后锆铝复合氧化物填料对富勒烯表现出较强的分离能力，具有作为富勒烯制备分离的潜力。     

Synthesis and characterization of three tetranuclear clusters containing a [Mo3OS3Sn]6+ cubane-like core

Three heterometallic cubane-like clusters, [Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)3(py)3] (dtp = S2P(OC2H5)2-, py = C5H5N) (1), (PPN)[Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)3(mu-OAc)(py)] (OAc = CH3COO-, PPN = (C6H5)3PNP(C6H5)3+) (2), and (Et4N)[Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)2(mu-OAc)2(py)] (3) have been prepared by the reaction of [Mo3(mu 3-O)-(mu-S)3(dtp)4(H2O)] (4), [Mo3(mu 3-O)(mu-S)3(dtp)3(OAc) (py)] (5), and [Mo3(mu 3-O)(mu-S)3(dtp)2(OAc)2 (py)] (6) with SnCl2, respectively. They have been characterized by IR, UV-vis, 31P NMR, 95Mo NMR, and X-ray structure analysis. All of these heterometallic clusters have a [Mo3OS3Sn]6+ core but contain a different arrangement of peripheral ligands. As far as the neutral cluster 1 is concerned, there is no bridging OAc ligand, while only one bridging OAc ligand is observed for cluster 2 and two are for cluster 3. The Mo-Mo distances are about 0.03-0.04 A shorter than those of the starting trimolybdenum clusters. This indicates that the incorporation of SnCl3- fragment into (Mo3) clusters makes the Mo-Mo bonding enhanced. Crystal data for 1: triclinic, space group P-1, a = 10.7423(2) A, b = 14.0357(1) A, c = 16.9346(2) A, alpha = 84.054(1) degrees, beta = 87.095(1) degrees, gamma = 84.517(1) degrees, V = 2525.82(6) A3, Z = 2, R = 0.038 for 5584 reflections (I > 2.0 sigma(I)). Crystal data for 2: triclinic, space group P-1, a = 12.9529(1) A, b = 15.6324(2) A, c = 19.6355(1) A, alpha = 92.083(1) degrees, beta = 97.908(1) degrees, gamma = 110.337(1) degrees, V = 3677.41(6) A3, Z = 2, R = 0.034 for 8665 reflections (I > 2.0 sigma(I)). Crystal data for 3: monoclinic, space group P2(1)/n, a = 14.0852(5) A, b = 15.1324(5) A, c = 23.2691(7) A, beta = 97.371(1) degrees, V = 4918.7(3) A3, Z = 4, R = 0.049 for 4970 reflections (I > 2.0 sigma(I)).     

Synthesis and structural characterization of a novel dimolybdenum(I) compound with mixed‐tribridging ligands: [Bu4N][Mo2(μ‐SPh)2(μ‐Cl(CO6]

A novel mixed‐tribridged dimolybdenum(I) compound [Bn₄N][Mo₂(μ‐SPh)₂(μ‐Cl)(CO)₆] (1) has been synthesized from the reaction of Mo₂(CO)₃(SPh)₂ with BU₄NCl. Compound 1 was characterized by IR, UV‐Vis and ¹H, ¹³C, ⁹⁵Mo NMR spectroscopic analyses. The electrochemical behavior was measured by cyclic voltammetry, indicating a quasi‐reversible two‐electron transfer in one step. The crystal structure determined by X‐ray crystallography shows that 1 contains a [Mo₂(μ‐S)₂(μ‐Cl)]^? core with a planar Mo₂S₂unit and a Cl bridge. The Mo? Mo distance is 0.28709(7) nm, and the Mo‐Cl‐Mo angle is 66.44(4)°. A newface‐sharing bioctahedral structure is discussed.     

化学与社会:跨学科视角下的通识课教学新探索

从通识教育的时代要求和化学的学科地位出发，首先讨论了在化学类通识课程建设中引入跨学科视角的意义和可操作性。随后以通识课"化学与社会"的建设为例，系统地分享了引入跨学科视角后的课程设计理念和内容框架建设，通过课堂实施方案的论述和特色实例的分享总结了课程实施经验，并以学生访谈资料分析讨论了课程取得的效果和需要进一步完善的方向。以期为跨学科理念在化学教育教学实践中的转化和落地开拓思路、提供经验。     

单原子铂催化剂的制备及其低温催化氧化一氧化碳

以氧化石墨烯为载体,单原子铂（Pt）为活性组分,利用化学还原法制备了单原子Pt/rGO催化剂,用在催化氧化一氧化碳（CO）反应中。通过透射电子显微镜、扫描电子显微镜、球差电镜、傅里叶红外光谱仪对单原子Pt催化剂进行表征。考察了金属负载量、反应温度对催化剂性能的影响,利用气相色谱对CO氧化反应性能进行评价。此次实验包含催化剂的制备、表征和性能测试,实验难度适中,贴近科研前沿,可以让学生体验一个综合的科研过程,激发学生的科研兴趣,培养学生的科研能力。     

Construction of Recycling Photocatalytic Gels for the Disinfection of Pathogens and Degradation of Organic Pollutants

Bismuth oxybromide (BiOBr) nanosheets are exciting photocatalysts for microbial disinfection and organic dye degradation. However, it remains a great challenge to easily recycle these nanomaterials and improve their photocatalytic ability. Herein, we constructed a novel photocatalytic BiOBr@PAG gel containing BiOBr nanosheets and polyacrylamide gel (PAG), based on peroxydisulfate-induced polymerization reaction. The photocatalytic gel had equally distribution of BiOBr nanosheets on the surface, and could be easily recycled from water. More strikingly, the gel could also rapidly kill all tested pathogenic bacteria (i. e., Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) under irradiation. Its disinfection activity is attributed to remarkable intracellular ROS production and oxidative cell damage. Furthermore, the gel had higher photocatalytic activity than BiOBr nanosheets alone during degradation of organic dyes. This study developed a novel strategy for preparation of easy-recycling and high-efficiency photocatalytic systems for practical application in environmental treatment and medicinal disinfection.     

Effect of BaO on the calcination and hydration characteristic of CA

Phosphoaluminate cement (PAC) clinker had good mechanical properties at early and long-term period. In comparison, the compressive strength of PAC clinker modified by BaO was more prominent. As primary mineral phase for PAC clinker, CA’s mineralogical structure and hydration characteristics were intimately related to the compressive strength of hardened cement paste. In this study, the effects of BaO content on the calcination, mineralogical structure and hydration characteristics of CA were investigated. Experimental results showed that the appropriate calcination temperature of CA was 1400 °C. No more than 11% (the substitution ratio of BaO for CaO) addition of BaO can promote the conversion of C₁₂A₇ to CA and increase the formation ratio of CA. Appropriate content of 7 mol% BaO could endow the hardened paste with excellent compressive strength. In CA mineral phase the high limit addition of BaO was 15 mol%. The addition of BaO decreased and even restrained the formation of C₂AH₈ and C₃AH₆ of CA hydration products and also improved the content of CAH₁₀. The addition of BaO dramatically decreased the hydration velocity and cumulative heat of CA mineral.

     

Structures and photocatalytic performance of two d10 metal-based coordination polymers containing mixed building units

The linker 1,4-bis(2-methyl-imidazole-yl)-butane (bib) was used to construct two coordination polymers, specifically [Cd(bib)(ipa)]_n (1) and [Zn(bib)(tpa)]_n (2), in the presence of isophthalic acid (H₂ipa) and terephthalic acid (H₂tpa), respectively, under solvothermal conditions. Topological analyses reveal that the crystal of complex 1 consists of a 3D threefold interpenetrating network with Schläfli symbol {6⁵.8}, while complex 2 possesses a 2D wavelike layer structure with Schläfli symbol {6⁶}. The photocatalytic properties of both complexes for the degradation of methyl violet have been explored, revealing that complex 2 is a better photocatalyst than 1. A mechanism for the photocatalytic properties of the complexes is proposed, based on the results of density of states (DOS) and partial DOS calculations.

     

Structural Evolution and Electronic Properties of Au2Gen-/0 (n=1-8) Clusters: Anion Photoelectron Spectroscopy and Theoretical Calculations

Investigating the structures and properties of Au-Ge mixed clusters can give insight into the microscopic mechanisms in gold-catalyzed Ge films and can also provide valuable information for the production of germanium-based functional materials. In this work, size-selected anion photoelectron spectroscopy and theoretical calculations were used to explore the structural evolution and electronic properties of Au₂Ge_n^-/0 (n=1-8) clusters. It is found that the two Au atoms in Au₂Ge_n^-/0 (n=1-8) showed high coordination numbers and weak aurophilic interactions. The global minima of Au₂Ge_n^- anions and Au₂Ge_n neutrals are in spin doublet and singlet states, respectively. Au₂Ge_n^- anions and Au₂Ge_n neutrals showed similar structural features, except for Au₂Ge₄^-/0 and Au₂Ge₅^-/0. The C_2v symmetric V-shaped structure is observed for Au₂Ge₁^-/0, while Au₂Ge₂^-/0 has a C_2v symmetric dibridged structure. Au₂Ge₃^-/0 can be viewed as the two Au atoms attached to different Ge-Ge bonds of Ge₃ triangle. Au₂Ge₄^- has two Au atoms edge-capping Ge₄ tetrahedron, while Au₂Ge₄ neutral adopts a C_2v symmetric double Au atoms face-capping Ge₄ rhombus. Au₂Ge_5-8^-/0 show triangular, tetragonal, and pentagonal prism-based geometries. Au₂Ge₆ adopts a C_2v symmetric tetragonal prism structure and exhibits σ plus π double bonding characters.