Optical properties of nanocrystalline Y2O3:Eu depending on its odd structure

The structure of nanocrystalline Y2O3:Eu prepared by a combustion reaction was analyzed by XRD and high-resolution electron microscopy. Compared with a large-scale particles, 5-nm Y2O3:Eu particles presented as distorted crystallite and rough surfaces. Luminescent and absorption properties of nano-Y2O3:Eu showed remarkably particle size effects. At Y2O3:Eu particle sizes smaller than 10 nm some new results were observed: (a) a red shift of the charge-transfer-state absorption; (b) new emission bands of Eu3+ in the 5D0 --> 7F2 region; (c) luminescent decay of energy level 5D0 of Eu3+ turning to a two-step exponential; and (d) a pronounced increase in quenching concentration and much lower phonon density compared with those of the bulk material. All these phenomena can be attributed to the effect of the softened lattice and surface state of the nanomaterial. The latter was confirmed by stronger excitation by the host absorption after the surface modification.     

Spectral studies on the interaction of Amido black 10B with DNA in the presence of cetyltrimethylammonium bromide

The interaction of Amido black 10B (AB) with DNA in basic medium was studied in the presence of cetyltrimethylammonium bromide (CTMAB) based on the measurements of resonance light scattering (RLS), UV–vis, CD spectra, and RLS imaging. The interaction has been proved to give a ternary complex of CTMAB–DNA–AB in Britton–Robinson buffer of pH 11.55, which exhibits strong negative Cotton effect at 233.3 nm and 642.8 nm, and strong RLS signals characterized at 469 nm. Experiments showed that the enhanced RLS intensities (ΔI_RLS) against the mixture of AB and CTMAB are proportional to the concentration of fish sperm DNA (fsDNA) and calf thymus DNA (ctDNA), respectively over the range of 0.03–1.0 and 0.05–1.5 μg ml⁻¹, with the limits of determination (3σ) of 7.3 ng ml⁻¹ for fsDNA and 7.0 ng ml⁻¹ for ctDNA.     

Theoretical study of 3d‐metal mononitrides using DFT method

3d‐Metal mononitrides are studied using the density functional theory method. The lowest spin state for these dimers is obtained using the B3LYP hybrid functional with the 6‐311+G* basis set. The equilibrium geometries, vibrational frequencies, binding energies, Mulliken, and natural orbital population analysis charges, natural orbital electronic configuration, electron affinity, and ionization potential are obtained. Mulliken as well as natural orbital population analysis charges indicate that for all dimers, in cations most of the positive charge localized on the transition metal atom where in anions most of the negative charge localized on nitrogen atom. The binding energies for 3d‐metal mononitrides are higher than those for monocarbides and monoxides. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

catena‐Poly[[tetra­aqua­manganese(II)]‐μ‐4‐(carboxyl­ato­methyl­sulfanyl)­phenoxy­acetato]

The title compound, [Mn(C₁₀H₈O₅S)(H₂O)₄]_n, a one‐dimensional manganese(II) complex comprising helical chains bridged by 4‐(carboxylatomethylsulfanyl)phenoxyacetate ligands has been characterized by single‐crystal X‐ray diffraction analysis. Hydrogen‐bonding inter­actions between adjacent chains extend the complex into a three‐dimensional supra­molecular architecture.     

A novel three‐dimensional cadmium(II) coordination polymer incorporating 1,4‐bis­(1,2,4‐triazol‐1‐ylmethyl)­benzene and thio­cyanate

In the title complex, poly[cadmium(II)‐μ₂‐1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene‐di‐μ₂‐thio­cyanato], [Cd(NCS)₂(C₁₂H₁₂N₆)]_n, the Cd^II atom lies on an inversion centre in a distorted octa­hedral environment. Four N atoms from the thio­cyanate and 1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene (bbtz) ligands occupy the equatorial positions, and two S atoms from symmetry‐related thio­cyanate ligands occupy the axial positions. The benzene ring of the bbtz ligand lies about an inversion centre. Single thio­cyanate bridges link the Cd^II atoms into two‐dimensional sheets containing novel 16‐membered [Cd₄(μ‐NCS‐N:S)₄] rings. The bbtz ligands further link these two‐dimensional sheets into an unprecedented covalent three‐dimensional network for the cadmium–thio­cyanate system.     

A study of laser ablation and slurry nebulisation sample introduction for the analysis of geochemical materials by inductively coupled plasma spectrometry

Summary The performances of two alternative sample introduction methods for use with Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) have been evaluated for the analysis of the same sample material. The laser ablation sample introduction system is based on a Nd:YAG laser to which an x-y-z translational sampling head had been added. A study has been made of a number of parameters which affect the performance of the system to find the optimum operating conditions. The slurry introduction system involved aspirating the slurries into the plasma using a de Galan nebuliser and a Scott-type spray chamber arrangement. A study has been made of the parameters which control the production of stable homogeneous slurries. Initial particle size measurements have been carried out on the slurried samples to show how this affects this method of sample introduction. Results are presented for the analysis of a South African reference material rock sample (SARM 5) by ICP-OES with both laser ablation and slurry nebulisation sample introduction and some preliminary results for the analysis by ICP-MS with laser ablation introduction. Semi-quantitative results are obtained for laser ablation ICP-OES as only one matrix matched standard is used. However, the agreement between the results obtained for slurry nebulisation and the certificate value is poor. It is suggested by comparison with previous studies that this may be due to particle size effects. Encouraging results were obtained for the determination of trace elements by laser ablation ICP-MS.     

聚对苯撑对苯二甲酰胺液晶的相态转变

本工作以H(?)ppler流变粘度计、退偏振光法及小角激光光散射法研究了聚对苯撑对苯二甲酰胺的浓硫酸溶液在不同浓度和温度下的粘性行为、光学性质和区域结构的变化,发现聚对苯撑对苯二甲酰胺的各向异性溶液在不同温度下呈现向列型液晶和胆甾型液晶特征,说明芳香聚酰胺的液晶体系与小分子液晶相类似,也具有多种中介相的转变现象。这里的中介相转变是由向列型转变为胆甾型,但不是直接的同时是一个单变性的相转变过程。     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Supramolecular isomerism in the hydrogen-bonded network of (5<Emphasis Type="Italic">R</Emphasis>,10<Emphasis Type="Italic">R</Emphasis>)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-<Emphasis Type="Italic">cde</Emphasis>]chromene monohydrate

A new compound (5R, 10R)-3,8-dihydroxy-5,10-diethoxy-5,10-dihydrochromeno[5,4,3-cde]chromene monohydrate was obtained from 3,4-dihydroxybenzaldehyde in aerobic basic aqueous ethanol solution in the presence of manganese chloride and triethylamine and crystallized in orthorhombic P2₁2₁2₁ space group (denoted as 1). When 1 was recrystallized from aqueous methanol, it was transformed to another crystal (2) with the same composition but in P2₁/n space group. The drastic difference in the extensive hydrogen bond network makes 1 a 3D and 2 a 2D infinite supramolecular structure, respectively.     

TiO2-CdS-MCM-41复合纳米材料的合成和表征

利用γ-巯丙基三甲氧基硅烷及表面预吸附水解技术在MCM-41介孔分子筛孔道内部以化学键合的形式依次引入了CdS和TiO2纳米粒子.紫外-可见吸收光谱结果表明,借助于巯基的络合能力,MCM-41能有效地从反胶束中萃取CdS纳米粒子.利用小角XRD谱图成功地跟踪观察到了MCM-41介孔分子筛随纳米粒子的引入而产生的孔径变化.