基于Gm-APD的成像激光雷达目标探测特性

针对采用盖革模式雪崩光电二极管（Gm-APD）作为探测器的成像激光雷达,介绍了其测距原理及3D成像原理,并对如何提高其探测性能的方法进行了分析。以分析Gm-APD触发信号的统计特性为基础,对出现在距离门内不同位置目标的探测概率和虚警概率进行了研究与仿真,结果表明,目标处在距离门最前面时,探测概率受噪声水平影响最小,虚警概率受信号强度影响最大;目标靠近距离门中间位置时,探测概率随噪声水平增大下降缓慢,虚警概率随信号强度增大下降缓慢;目标处在距离门末尾时探测概率受噪声水平影响最大,而虚警概率几乎与回波信号强度无关。     

直线感应加速器加速腔物理设计与研究

简要介绍直线感应加速器（ＬＩＡ）加速腔物理设计的几个关键问题．讨论了加速电压及其平顶和腔参数的关系．对腔的耦合阻抗与束流不稳定性的关系作了概念性介绍，分析了降低耦合阻抗的途径．并给出两个加速腔设计原型．     

相关测速声呐阵元坐标估计算法研究

针对相关声呐接收阵元实际坐标与设计坐标不一致引起的测速误差,提出阵元坐标估计算法,以提高相关声呐的测速准确度。基于混响时空相关函数模型,对相关测速声呐时空相关函数特性进行了理论分析,提出了选择用延时0处的数据空间相关函数与理论空间相关函数进行阵元坐标估计的局域最小二乘拟合算法,并采用序列二次规划法解决了阵元坐标估计算法的最优化问题。海上试验数据的处理结果表明,该算法可以对阵元坐标进行有效估计,使用估计的阵元坐标后,相关测速声呐测速准确度提高了67%。     

氘化物阴极真空弧放电光斑分布

氘化物真空弧放电在许多领域均有应用,如无损检测、石油探井、中子活化分析等。和金属阴极不同,氘化物阴极放电时会释放大量的气体分子,表现出许多不同性质。采用放大镜头和ICCD相机观察了氘化物阴极真空弧放电光斑分布。测量系统的空间分辨率约为5 μm,时间分辨率最小2 ns。放电脉冲半高全宽（FWHM）0.9 μs,弧流波形为半周期正弦波。实验结果表明,氘化物真空弧放电时,所有阴极斑聚集为一个群落,表现为一个大光斑;在液滴作用下,阴极斑群落偶尔也会分裂为两个或多个群落;光斑形状不受弧流影响,但面积和亮度会随弧流增加而增大。氘化物阴极放电斑点聚集有利于产生高密度等离子体,提高放电效率。     

含氘电极真空弧等离子体空间分布特性诊断研究

真空弧放电等离子体含有多种离子成分,并且各离子在空间上具有不同的分布规律.本文针对金属氘化物电极真空弧离子源,搭建了一台紧凑型磁分析装置,用来研究放电等离子体中氘离子与金属离子的空间分布.当离子源弧流为100 A左右时,该装置能有效地传输引出束流,并且具有较好的二次电子抑制效果,可准确获得各离子流强.利用该装置测量并获得了氘化钛含氘电极真空弧放电等离子体内氘离子和钛离子空间分布规律,结果表明:径向上,氘离子和钛离子都呈高斯分布,但氘离子分布均匀,而钛离子相对集中在轴线附近,导致轴线附近氘离子比例最低;轴向上,所有离子数量都以自然指数函数减少,而且相对幅度接近,所以氘离子比例几乎不变.本文研究结果不仅有助于理解真空弧放电等离子体膨胀过程,还可以指导金属氘化物电极真空弧离子源及其引出设计.     

甲基环己烷在9∽15.5 eV能量区的真空紫外光电离研究

利用具有同步辐射源的反射式飞行时间质谱仪,研究甲基环己烷的真空紫外光电离和光解离. 观测到母体离子C₇H₁₄⁺和碎片离子C₇H₁₃⁺,C₆H₁₁⁺,C₆H₁₀⁺,C₅H₁₀⁺,C₅H₉⁺,C₄H₈⁺,C₄H₇⁺和C₃H₅⁺的光电离效率曲线. 测定甲基环己烷的电离能为9.80±0.03 eV,通过光电离效率曲线确定其碎片离子的出现势. 在B3LYP/6-31G(d)水平上对过渡态、中间体和产物离子的优化结构进行表征,并使用G3B3方法计算其能量. 提出主要碎片离子的形成通道. 分子内氢迁移和碳开环是甲基环己烷裂解途径中最重要的过程.     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

Effects of Nb and Si on densities of valence electrons in bulk and defects of Fe3Al alloys

Positron lifetime measurements have been performed in binary Fe₃Al and Fe₃Al doping with Nb or Si alloys. The densities of valence electrons of the bulk and microdefects in all tested samples have been calculated by using the positron lifetime parameters. Density of valence electron is low in the bulk of Fe₃Al alloy. It indicates that, the 3d electrons in a Fe atom have strong-localized properties and tend to form covalent bonds with Al atoms, and the bonding nature in Fe₃Al is a mixture of metallic and covalent bonds. The density of valence electron is very low in the defects of Fe₃Al grain boundary, which makes the bonding cohesion in grain boundary quite weak. The addition of Si to Fe₃Al gives rise to the decrease of the densities of valence electrons in the bulk and the grain boundary thus the metallic bonding cohesion. This makes the alloy more brittle. The addition of Nb to Fe₃Al results in the decrease of the ordering energy of the alloy and increases the density of valence electron and the bonding cohesion of the grain boundary. However, since the radius of Nb atom is larger than that of Fe atom, when Nb atoms substitute for Fe atoms, they will distort the lattice and enlarge the volume of the lattice, which decreases the density of valence electron and the cohesion of metallic bond in the bulk of the alloy. Project supported by the National Natural Science Foundation of China (Grant No. 59561001) and the Foundation of Guangxi Education Committee.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

分层介质中面波的能量分布

在三维情况下研究了分层介质中Rayleigh和Love面波的能量分布问题,分析了多层介质中柱面面波的能量传播特性.面波是声源与介质分界面相互作用的结果,其能流密度随深度增加很快衰减,但在一定深度处出现极大和极小值.通过数值分析发现只有当径向距离较大时,面波能量传播的速度才等于其群速度.文中还考查了频率、深度、介质层状结构等参数对能量分布的影响.