固体中13C CP/MAS谱编辑一些改进

本文将基本的谱编辑脉冲序列与消旋转边带的TOSS脉冲序列联用,可以实现强磁场下¹³C CP/MAS谱编辑.通常,固体中非质子化碳与甲基碳的自旋晶格弛豫时间差别很大,此差别可作为谱编辑过程中区分它们的一条附加判据.对具有复杂分子结构的体系,此判据的作用尤其重要.文中的实例将表明:一个完整的¹³C CP/MAS谱编辑一般可通过SCPTOSS谱(短接触时间交叉极化谱);SCPPITOSS (短接触时间交叉极化极化反转)谱,LCPDTOSS (长接触时间交叉极化及去极化)谱及部分弛豫的LCPDTOSS谱适当组合而得到.     

模压全息图母版的拍摄研究

目前拍摄模压全息母版用的记录材料都是光刻胶.本文从它本身的特点(灵敏度低,浮雕型相位光栅和拍摄对象是散射物体等)出发,指出要拍摄出质量好的光刻胶母版应当注意到的问题.诸如拍摄参数的选择应同时考虑到衍射效率和信噪比、照明的均匀性问题、逆共轭光再现、消偏振、相干长度、外界振动对拍摄的影响问题.通过分析表明高质量的全息图不可能靠延长曝光时间来获得,使用相干性好的大功率激光束来拍摄,是非常有必要的.     

有序集上的自由Ockham代数的注记

从构造有序集上的自由分配格出发，证明了任意有序集上存在自由Ｏｃｋ－ｈａｍ代数     

化学位移各向导性对半整数自旋四极核的2D NMR章动的影响(英文)

考察了化学位移各向异性对半整数自旋四极核2DNMR章动的影响．用数值方法对2DNMR章动实验的演化期的Hamiltonian矩阵进行对角化，然后用帐篷法进行粉末平均，获得了自旋为I＝3／2、5／2、7／2和9／2的四极核在不同化学位移各向异性下的2DNMR章动谱．实验结果与理论计算符合较好．     

当能级间隔较小时三能级核四极共振自旋系统对脉冲的响应

用虚拟自旋—１／２算符理论考察了Ｉ＝１的核四极共振自旋系统在其能级间隔较小时对１—２个脉冲的响应．由于核四极相互作用表象中的射频场与核自旋的相互作用（Ｈｎ）包含时间．因而用Ｄｙｓｏｎ时序算符来计算密度算符在Ｈｎ作用下的演化．     

In vitro selection of histone H4 aptamers for recognition imaging microscopy

Recognition imaging microscopy is an analytical technique used to map the topography and chemical identity of specific protein molecules present in complex biological samples. The technique relies on the use of antibodies tethered to the cantilever tip of an AFM probe to detect cognate antigens deposited onto a mica surface. Despite the power of this technique to resolve single molecules with nanometer-scale spacing, the recognition step remains limited by the availability of suitable quality antibodies. Here we report the in vitro selection and recognition imaging of anti-histone H4 aptamers. In addition to identifying aptamers to highly basic proteins, these results suggest that aptamers provide an efficient, cost-effective route to highly selective affinity reagents for recognition imaging microscopy.     

压实粉土非线性应力-应变关系的试验研究

对京九线路基粉土用GDS三轴仪进行固结不排水剪试验,研究不同围压、含水量、压实度下压实粉土样的应力-应变关系。结果表明:压实粉土在低围压下为应变软化,高围压下为应变硬化,存在一个屈服应力;含水量和压实度对粉土强度和应力-应变关系影响显著,随着含水量的减小、压实度的增大,压实粉土样强度增大,应力-应变曲线上升。对围压小于屈服应力的应变软化曲线,用常规的土的软化关系式进行拟和;对围压大于屈服应力的应变硬化曲线,用邓肯-张模型进行拟和;这二者的结合能描述压实粉土的应力-应变关系曲线,效果良好。     

Cucurbit(6)uril immobilized on silica: A novel high‐performance liquid chromatographic stationary phase

In the present study, one of the new generation of host molecules, cucurbit(6)uril (CB(6)), was immobilized onto silica (CB(6)/SiO₂) by a sol–gel approach. CB(6)/SiO₂ was characterized by NMR spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. It was used as a high‐performance liquid chromatographic stationary phase and its chromatographic performance was systematically investigated with different types of analytes as probes. The results revealed that the CB(6)/SiO₂ stationary phase exhibited weak hydrophobic and strong hydrophilic properties. Hence, the variables for hydrophilic interaction liquid chromatography, including components and pH of the mobile phase, were further investigated to explore the retention mechanism of this CB(6)/SiO₂ stationary phase. For less polar analytes, both hydrophobic and hydrophilic interactions could contribute to the retention, while for polar analytes, hydrophilic interaction may be predominant. Compared to the tetraethoxylsilane‐coated SiO₂ stationary phases, the CB(6)/SiO₂ stationary phase exhibited a different retention behavior toward basic analytes with excellent stability. It is a novel promising hydrophilic interaction liquid chromatography stationary phase.     

Novel Bi2O3 nanoporous film fabricated by anodic oxidation and its photoelectrochemical performance

Novel bismuth oxide (Bi₂O₃) nanoporous films were fabricated through anodization of bismuth foil in electrolytes containing glycol, ammonium sulfate ((NH₄)₂SO₄) and deionized (DI) water. Scanning electron microscopy analysis indicated that morphology of the anodized bismuth foil changed markedly along with the changing of oxidation time, water content, electrolyte concentration, temperature, and applied voltages. The optimized morphology was obtained when bismuth was anodized at 20 V, 40 °C for 40 min in glycol solution containing 0.3 wt% (NH₄)₂SO₄ and 5 wt% DI water. The composition and crystal structure of the samples formed in the optimized conditions were characterized by energy-dispersive spectroscopy and X-ray diffraction. Results showed that the as-prepared nanoporous structures were amorphous. β-Bi2O3 was obtained when the samples were annealed at 200 °C. The photocurrent response experiments demonstrated that the Bi₂O₃ nanoporous film can generate photocurrent as large as 2.893 and 6.980 μA/cm² under 0 and 0.5 V bias voltage versus saturated calomel electrode, respectively.