表面分形球、柱的光散射

分形和分维是近些年才兴起的一门处理复杂事物的新方法￣［１］。本文主要研究具有表面分形的球、柱的光散射特征。我们首先利用几何光学近似研究了一种表面满足自仿射原理的分形均匀球的散射，其散射特性与分维存在一定的关系。我们还利用微扰法讨论了表面具有沟槽的分形柱的光散射的分形特征。     

A polarized CARS investigation of the fine structure population inversion of Cl atoms from laser photolysis of ICl and the quenching of Cl(2 P 1/2) by O2

The time resolved polarized CARS technique has been used to detect Cl atoms produced by photolysis of ICl in the presence and absence of O₂. A population inversion was observed between the ground state electronic levels Cl(² P _1/2) and Cl(² P _3/2). The rate constant for Cl(² P _1/2) decay (quenching + reaction) in ICl was determined to be (3.2±0.2)×10^–13 cm³/molecule×s; the rate constant for Cl(² P _3/2) reaction with ICl was determined to be (7.8±0.5)×10^–12 cm³/molecule×s; and the rate constant for Cl(² P _1/2) quenching by O₂ was determined to be (1.9±0.2)×10^–13 cm³/molecule×s.     

软土地基变形的混沌性与承载力识别

本文以混沌理论为基础, 分析了软土地基变形的混沌性态, 并采用映射函数f(x)=ax²+c来拟合软土地基的沉降-载荷曲线。根据映射函数的不动点, 对软土地基加固前后的承载力进行了识别, 并与按相对变形值确定的承载力进行了比较。     

强夯处理红粘土沉降试验研究

红粘土作为高填方体的底层地基,处理其沉降和不均匀性沉降是高填方工程研究的重点。以某机场红粘土高填地基的处理为例,通过沉降分析和方案比选开展强夯处理试验研究。根据场区内不同覆土厚度,采用不同能级进行强夯处理试验确定了合理的施工工艺和参数。通过施工中沉降观测,施工后地基土的物理力学指标试验、载荷试验和工后沉降观测,强夯处理取得了良好的效果,满足设计要求。指导大面积施工时,在质量、造价、工期上都取得了成功。     

Liquid‐Crystalline Mesogens Based on Cyclo[6]aramides: Distinctive Phase Transitions in Response to Macrocyclic Host–Guest Interactions

Producing macrocyclic mesogens that are responsive to guest encapsulation presents a significant challenge. Cyclo[6]aramides, a type of macrocycle with a hydrogen‐bond‐constrained backbone, exhibit thermotropic lamellar, discotic nematic, hexagonal, and rectangular columnar mesophases over a considerably wide temperature range, including at room temperature. Additionally, cyclo[6]aramides show unusual mesophase transitions from lamellar to hexagonal columnar phase mediated by macrocyclic host–guest (H–G) interactions between the macrocycles and alkylammonium salts. The phase transition, triggered by an organic guest engaging in H–G interactions with a macrocyclic cavity, provides a novel strategy for manipulating the properties of liquid‐crystalline materials. The crystal structure of a homologous cyclo[6]aramide reveals a disk‐shaped, near‐planar molecular backbone that facilitates intermolecular π–π stacking and leads to columnar assembly.     

The Two‐Step Assemblies of Basic‐Amino‐Acid‐Rich Peptide with a Highly Charged Polyoxometalate

Two‐step assembly of a peptide from HPV16 L1 with a highly charged europium‐substituted polyoxometalate (POM) cluster, accompanying a great luminescence enhancement of the inorganic polyanions, is reported. The mechanism is discussed in detail by analyzing the thermodynamic parameters from isothermal titration calorimetry (ITC), time‐resolved fluorescent and NMR spectra. By comparing the actions of the peptide analogues, a binding process and model are proposed accordingly. The driving forces in each binding step are clarified, and the initial POM aggregation, basic‐sequence and hydrophobic C termini of peptide are revealed to contribute essentially to the two‐step assembly. The present study demonstrates both a meaningful preparation for bioinorganic materials and a strategy using POMs to modulate the assembly of peptides and even proteins, which could be extended to other proteins and/or viruses by using peptides and POMs with similar properties.     

Determination of five sesquiterpenoids in Xingnaojing injection by quantitative analysis of multiple components with a single marker

A quantitative analysis of multiple components with a single‐marker method was established for the simultaneous determination of five sesqutiterpenoids in Xingnaojing injection. This method was established with Xingnaojing injection determined by high‐performance liquid chromatography coupled with diode array detection. The durability and system suitability of the established method were evaluated, and the reliable relative correction factors were obtained with curdione selected as an internal reference. The contents of the five components in all Xingnaojing injections were determined by external standard method and the contents of curcumenone, curcumenol, curzerenone, and germacrone were also calculated with the obtained relative correction factors. Then, relative error was investigated to estimate the difference of the two methods. As a result, the established new method possesses good adaptability, and there is no significant difference between the two methods, except for the content of curzerenone in eight samples. To put the established method into practice, the limits of quantitation of the established method of the five components were proposed and defined. Thus, the developed methodology can also be utilized to the quality evaluation of Xingnaojing injection, in spite of the difference found in the content of curzerenone between the external standard method and the newly established method.     

Preparation of Janus Graphene Oxide (GO) Nanosheets Based on Electrostatic Assembly of GO Nanosheets and Polystyrene Microspheres

A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.

     

Indentation tests investigation of mechanical behavior of two-dimensional materials

准确了解二维材料的力学性能对于推动其应用具有重要意义, 无基底压痕技术是目前最广泛采用的二维材料力学性能测试方法之一, 本文综述了二维材料压痕研究的最新进展以及所面临的问题, 并对将来的研究工作进行了展望.无基底压痕技术是将二维材料转移到带有沟槽或柱形孔的基底上, 制备二维材料"梁"和"鼓"模型, 然后利用原子力显微镜测量其在压针作用下的载荷--位移关系, 最后通过基于连续介质薄膜导出的压痕响应分析模型拟合实验结果, 估算出二维材料的弹性模量和本征强度.由于二维材料的厚度远小于连续介质薄膜, 来自于压头以及基底孔侧壁的范德华力对二维材料的压痕响应具有显著影响, 造成二维材料与传统压痕分析模型中的基本假设不符, 导致不能准确预测二维材料的弹性模量; 另外, 由于传统压痕模型无法准确描述二维材料在大变形下的非线性行为, 以及由缺陷等引起的应力集中, 导致由压痕测试表征的二维材料(特别是多晶二维材料)本征强度具有较大的偏差. 因此, 一方面需要正确了解由压痕技术获得的二维材料力学性能, 另一方面还需对目前的研究方法做进一步的改进和完善.