装备使用与保障研究数据的生成方法研究

装备使用与保障数据是开展装备科学研究的重要依据,而由于管理不善、保密、样本过少等原因常常导致相关数据缺少应有的积累,无法满足实际研究的需要。为了克服这一困难,文章提出通过算法生成数据予以解决。首先根据数据的应用特性,将装备使用与保障数据看作简单数据、规律已知数据和规律未知数据三类,分别制定生成策略。对于简单数据和规律已知数据,通过已有的商用软件或简单的自定义方法生成;对于规律未知数据,采用模式注入或特性继承的方法生成。在某大型装备管理综合信息系统的设计开发中,对这些生成方法进行了工程实践,结果表明了方法的正确性和可行性。     

Preparation,thermal property,and thermal stability of microencapsulated n-octadecane with poly(stearyl methacrylate) as shell

This study focused on preparation and thermal properties of poly(stearyl methacrylate) shell (PSMA) microcapsules containing n-octadecane as a phase change material (PCM). Pentaerythritol triacrylate (PETA) and divinylbenzene (DVB) were employed as crosslinking agents. The surface morphologies, particle sizes, and distributions of the microencapsulated phase change material (microPCM) were studied by scanning electron microscopy. The thermal properties, thermal reliabilities, and thermal stabilities of the microPCMs were investigated by differential scanning calorimetry and thermal gravimetric analysis. The microPCM with DVB exhibits higher phase change enthalpies of melting (87.9 J g^?1) and crystallization (94.8 J g^?1) and a greater thermal stability in comparison with the microPCM with PETA. The phase change temperatures and enthalpies of the microPCMs varied little after thermal cycles. Thermal images showed that the gypsum board with PSMA/n-octadecane microPCM possessed temperature-regulated property. Therefore, microencapsulated n-octadecane with PSMA as shell has good thermal energy storage and thermal regulation potential.     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.     

静电纺聚偏氟乙烯@硅藻土锂离子电池隔膜的制备及性能

以聚偏氟乙烯(PVDF)和硅藻土为原料,通过静电纺丝法制备PVDF@硅藻土复合纤维膜,用于锂离子电池隔膜。 研究了隔膜的吸液率、热稳定性和电化学性能等。 添加硅藻土可有效提高复合膜的电解液吸收率和电化学性能,其中吸液率可达623.6%,相比于PVDF膜和聚丙烯(PP)膜具有优异的循环性能和倍率性能。     

OLED器件新型应用研究进展

有机发光二极管(organic light-emitting diodes,OLED)具有可柔性制备、低驱动电压、低功耗等优点,近年来技术上的突飞猛进及其广泛的应用前景,使之成为平板显示、新型照明、可穿戴,以及智能电子产品开发中最热门的研究课题之一.作为新一代的显示及照明技术,小尺寸OLED显示器已实现商业化,大尺寸O...     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

Thermal Conductance of Graphene-Titanium Interface: A Molecular Simulation

Titanium is a commonly used material in aviation, aerospace, and military applications, due to the outstanding mechanical properties of titanium and its alloys. However, its relatively low thermal conductivity restricts its extended usage. The use of graphene as a filler shows great potential for the enhancement of thermal conductivity in titanium-based metal-matrix composites (MMCs). We used classical molecular dynamics (MD) simulation methods to explore the thermal conductance at the titanium–graphene (Ti/Gr) interface for its thermal boundary conductance, which plays an important role in the thermal properties of Ti-based MMCs. The effects of system size, layer number, temperature, and strain were considered. The results show that the thermal boundary conductance (TBC) decreases with an increasing layer number and reaches a plateau at n = 5. TBC falls under tensile strain and, in turn, it grows with compressive strain. The variation of TBC is explained qualitatively by the interfacial atomic vibration coupling factor. Our findings also provide insights into ways to optimize future thermal management based on Ti-based MMCs materials.     

一种基于序贯估计的直达声区水面舰船 被动测距方法 *

该文利用基于射线的盲解卷积方法,从直达声区的水面舰船噪声中提取出船和锚系于海底的垂直接收阵之间的时域信道响应,并利用直达波在不同阵元相对于参考阵元的到达时间差,通过序贯方法,利用射线模型和声速剖面信息,对水面舰船距接收阵的距离进行了估计。通过处理海深约为580 m的2016年美国圣巴巴拉海峡的实验数据,对1.6~3.5 km直达声区范围内Anna Maersk商船与垂直阵之间的距离进行了估计,验证了测距方法的有效性,并将结果与系统测量值和几何方法的估计值进行了比较。由于该方法不需要对海底参数进行估计,所以在海底参数未知时要优于传统匹配场方法;在声速剖面存在跃层且海底为多层分布的复杂信道条件下,该方法仍能对距离进行有效估计,且与测量值的相对误差在6%以内,小于几何方法的估计误差,测距结果精度较高。     

Existence and Approximate Controllability of Solutions for an Impulsive Evolution Equation with Nonlocal Conditions in Banach Space

In this article, we study the existence of mild solutions and approximate controllability for non-autonomous impulsive evolution equations with nonlocal conditions in Banach space. The existence of mild solutions and some conditions for approximate controllability of these non-autonomous impulsive evolution equations are given by using the Krasnoselskii''s fixed point theorem, the theory of evolution family and the resolvent operator. In particular,the impulsive functions are supposed to be continuous and the nonlocal item is divided into Lipschitz continuous and completely bounded. An example is given as an application of the results.     

Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.