Investigation on solvent casting films of surfactant-encapsulated clusters

The surfactant-encapsulated cluster (SEC) composed of a hydrophobic dimethyl dioctadecyl ammonium (DODA) shell and an encapsulated hydrophilic polyoxoanion core can form casting films. The structure of the casting film is influenced by evaporation rates of organic solvent. When the casting films are prepared by slow evaporation of chloroform, the alkyl chains are considered to possess a partial interdigitation, and the interdigitated length is 1.6 nm. The casting film structure is characterized by scanning force microscopy (SFM), Fourier transformation infrared (FT-IR), wide-angle X-ray diffraction, and differential scanning calorimetry (DSC).     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Asynchronous multicanonical basin hopping method and its application to cobalt nanoclusters

The multicanonical basin hopping (MUBH) method, which uses a multicanonical weight in the basin hopping (BH) Monte Carlo method, was found to be very efficient for global optimization of large-scale systems such as Lennard-Jones clusters containing more than 150 atoms. We have implemented an asynchronous parallel version of the MUBH method using the message passing interface (MPI) to take advantage of the full usage of multiprocessors in either a homogeneous or heterogeneous computational environment. Based on the intrinsic properties of the Monte Carlo method, this MPI implementation used the task parallelism to minimize interthread data communication. For a Co nanocluster consisting of N atoms, we have applied the asynchronous multicanonical basin hopping (AMUBH) method (for 181 < N < or = 200), together with BH (for 2 < or = N < 150) and MUBH (for 150 < or = N < or = 180), to search for the molecular configuration of the global energy minimum. AMUBH becomes the only practical computational scheme for locating the energy minimum within realistic computational time for a relatively large cluster.     

Temperature-Responsive Electrocatalysis Based on Poly(N-Isopropylacrylamide)-Modified Graphene Oxide (PNIPAm-GO)

Poly(N-isopropylacrylamide)-modified graphene oxide (PNIPAm-GO), which is a type of thermally responsive GO, was designed and synthesized through a covalent “grafting-from” strategy. The as-prepared modified nanosheets integrated the individual advantages of two components, such as the thermal sensitivity of the PNIPAm terminal as well as the conductivity and the open 2D structure of the GO substrate. PNIPAm-GO was able to perform the reversible regulation of hydrophilicity/hydrophobicity in aqueous solution upon variations in the temperature. Such a unique property might also lead to the utilization of PNIPAm-GO as an intelligent electrode material to achieve a switchable electrochemical response toward a [Fe(CN)₆]^3−/4− probe. The PNIPAm-GO modified glassy carbon electrode (PNIPAm-GO/GC electrode) was able to exhibit better electrochemical performance in an ON/OFF switching effect than the PNIPAm-modified glassy carbon electrode (PNIPAm/GC electrode) without GO owing to the intrinsic properties and large surface area of the introduced GO. Moreover, it was found that the PNIPAm-GO/GC electrode also displayed excellent thermally responsive electrocatalysis toward the detection of 1,4-dihydro-β-nicotinamide adenine dinucleotide (NADH) and dopamine (DA), which resulted in two different catalytic statuses on the same electrode. This kind of switchable catalytic performance of the PNIPAm-GO/GC electrode might greatly enhance the flexibility of its application, and thus it is expected to have wide potential for applications in the fields of biosensors and biocatalysis.     

Demulsification of Solids‐Stabilized Emulsions Under Microwave Radiation

Experimental data are presented to show the influence of solid particles on demulsification. It was found that the solid particles could effectively resist demulsification. Compared with conventional heating, microwave radiation can enhance the demulsification rate by an order of magnitude and increase the demulsification effectiveness. The demulsification effectiveness of the emulsions stabilized by graphite powder can reach 82%–89% in a very short time under microwave radiation, whilst that of the emulsions stabilized by barium sulfate can attain 100% under similar conditions.     

Microwave-Assisted Chemical Demulsification of Water-in-Crude-Oil Emulsions

Two case studies are presented that shows the effects of chemical demulsifiers used under conventional heating and in combination with microwave radiation on efficiency of demulsification and light transmittance of the water separated from the emulsions. The data shows that the chemical demulsifiers coupling with microwave radiation does a better job at demulsifying the water-in-crude-oil emulsions than when the chemical demulsifiers are used under conventional heating. The demulsification efficiency of AE-121 could reach 100% under microwave irradiation (300 W) for 50 seconds.     

Electrochemical‐Reduction‐Assisted Assembly of a Polyoxometalate/Graphene Nanocomposite and Its Enhanced Lithium‐Storage Performance

Herein, we present an electrochemically assisted method for the reduction of graphene oxide (GO) and the assembly of polyoxometalate clusters on the reduced GO (rGO) nanosheets for the preparation of nanocomposites. In this method, the Keggin‐type H₄SiW₁₂O₄₀ (SiW₁₂) is used as an electrocatalyst. During the reduction process, SiW₁₂ transfers the electrons from the electrode to GO, leading to a deep reduction of GO in which the content of oxygen‐containing groups is decreased to around 5 %. Meanwhile, the strong adsorption effect between the SiW₁₂ clusters and rGO nanosheets induces the spontaneous assembly of SiW₁₂ on rGO in a uniformly dispersed state, forming a porous, powder‐type nanocomposite. More importantly, the nanocomposite shows an enhanced capacity of 275 mAh g^?1 as a cathode active material for lithium storage, which is 1.7 times that of the pure SiW₁₂. This enhancement is attributed to the synergistic effect of the conductive rGO support and the well‐dispersed state of the SiW₁₂ clusters, which facilitate the electron transfer and lithium‐ion diffusion, respectively. Considering the facile, mild, and environmentally benign features of this method, it is reasonable as a general route for the incorporation of more types of functional polyoxometalates onto graphene matrices; this may allow the creation of nanocomposites for versatile applications, for example, in the fields of catalysis, electronics, and energy storage.     

Na2EDTA返滴定法测定铜镍合金中的镍含量

采用Na₂EDTA返滴定法测定铜镍合金中的镍含量,用柠檬酸钠、硫代硫酸钠和酒石酸作掩蔽剂,丁二酮肟沉淀分离,以二甲酚橙为指示剂,加入过量的Na2EDTA,用氯化锌标准溶液返滴定,能很好地分离铜及其他杂质的干扰。方法用于测定铜镍合金中的镍含量,测定结果的相对标准偏差(RSD,n=9)为0.046%~0.24%,加标回收率为99.3%~101%。能够满足日常样品的检测要求。     

Self-assembled lamellar nanochannels in polyoxometalate-polymer nanocomposites for proton conduction

The construction of nanostructured ion-transport channels is highly desirable in the design of advanced electrolyte materials,as it can enhance ion conductivity by offering short ion-transport pathways.In this work,we present a supramolecular strategy to fabricate a nanocomposite electrolyte containing highly ordered lamellar proton-conducting nanochannels,by the electrostatic self-assembly of a polyoxometalate H_3 PW_(12)O_(4 O)(PW) and a comb copolymer poly(4-methlstyrene)-graft-poly(N-vinyl pyrrolidone).PW can effectively regulate the self-assembling order of polymer moieties to form a large-ra nge lamellar structure,meanwhile,introducing protons into the nanoscale lamellar domains to build proton transport channels.Moreover,the rigid PW clusters contribute a remarkable mechanical reinforcement to the nanocomposites.The lamellar nanocomposite exhibits a conductivity of 4.3 × 10~(-4) S/cm and a storage modulus of 1.1 × 10~7 Pa at room temperature.This study provides a new strategy to construct nanostructured ion-conductive pathways in electrolyte materials.