A new solution of reducing polymer optical fiber losses

Polymethyl methacrylate (PMMA) is one of the most commonly used optical materials. However, the application of it in the area of optical communication is strongly limited by the intrinsic absorption loss of carbon-hydrogen stretching vibration. In this paper, we present a method to solve the problem by adopting the hollow-core fibers with cobweb cladding structure. The fibers use a single dielectric material and may solve the problem of structural support. Thus the feasibility of the “OmniGuide” fibers is improved, while a series of advantages of the “OmniGuide” hollow-core fiber are retained. It is promising that a fiber with low transmission loss, high bandwidth, large-core, and low costs can be designed and fabricated using PMMA. At the same time, a very broad range of the wavelengths (from visible to near infrared region, for instance, wavelengths at 0.65-1.12 μm, and even 1.30 μm, 1.54 μm and their neighbors) may be adopted for signal wavelength.     

两端叠层结构的中长波量子阱红外探测器

采用分子束外延技术生长了两个叠层结构的双色量子阱红外探测器结构,并经过光刻和湿法刻蚀制作成两端结构的量子阱红外探测器单元器件. 通过改变量子阱势垒高度,势阱宽度,掺杂浓度,重复周期数等器件参数,可以使总电压在两个叠层之间产生适当的分布,从而使器件表现出不同的电压响应特点. 光电流谱测量显示,器件1随着外加偏置电压可实现对于中波大气红外窗口(3—5 μm)和长波大气红外窗口(8—12 μm)红外响应的切换,器件2在不同的偏置电压下可以对这两个波段同时做出响应. 本文探讨了两端叠层结构量子阱红外探测器的工作原 关键词： 电压调制 同时响应 量子阱红外探测器 双波段     

一类流固耦合系统强解的存在性问题

本文主要讨论一类多刚体与粘性系数依赖于密度的不可压缩流体耦合系统的强解存在性问题.首先,利用变量替换建立本文研究对象对应的非线性微分方程,然后,利用Garlerkin逼近方法获得线性化问题的光滑解,从而可以构造出原问题的逼近解.通过估计逼近解的一致有界性,最后证明了一类描述多刚体在不可压缩流体中运动的耦合系统强解的存在...     

乳腺癌组织中蛋白质与核酸分子氢键特征的研究

正常乳腺组织与乳腺癌组织的红外光谱之间存在明显而规律的差异,其中包括蛋白质与核酸等生物分子的氢键缔合方式和程度上的不同。光谱的变化主要表现在：（1）蛋白质的酰胺Ⅰ带,N－H基团和某些氨基酸残基上C－O（H）基团的振动谱带;（2）核酸分子中磷酸二酯的反对称伸缩振动谱带和配对的碱基N－H基团振动等谱带上。氢键是维系和促进蛋白质与核酸高级结构形成的重要作用力,癌变时氢键的变化与癌细胞的特殊生物学行为密切相关,因此有可能利用氢键的这些光谱特征作为乳腺癌诊断和预测癌变可能性的指标。     

Fermi能区核－核碰撞的平衡前中子发射

利用ＢＵＵ模型模拟核－核碰撞３６Ａｒ＋１０８Ａｇ（３５Ｍｅｖ／ｕ）、１４Ｎ＋１０８Ａｇ（３５ＭｅＶ／ｕ）中的平衡前中子发射．模拟结果与唯象的运动源拟合给出的中等速度源成份相吻合．这说明中等速度源成份产生于核－核碰撞的早期，对应平衡前发射．并从级联碰撞的角度定量地研究了平衡前发射的持续时间     

合肥国家同步辐射光源软X射线束空间相干性实验研究

本文从实验角度对合肥国家同步辐射实验室软X射线束的空间相干性进行了研究.利用放置在物面上的高分辨正性光刻胶,记录了中心波长为3.2nm的波带片和针孔直径为30μm组合的光场分布(光斑),获得相应条件下的爱里斑及空间相干直径实验数据;完成了一个双缝干涉实验.所得的这些结果与理论计算相一致.     

电子束蒸发沉积Ir膜真空紫外反射特性

Ir是一种重要的真空紫外反射材料,在太阳物理、宇宙物理、生命科学、大气物理、同步辐射等方面有着十分重要的应用.对电子束蒸发沉积Ir膜在真空紫外波段的反射特性进行了系统的理论和实验研究.根据吸收材料基底上单层金属膜数学计算模型,对不同基片上各种厚度的Ir膜真空紫外反射率进行了优化计算.根据计算和前期实验结果,采用电子束蒸发方法,在石英、K9玻璃基片上沉积了不同厚度的Ir膜,在入射波长120 nm处获得了近30%正入射反射率,对应的Ir膜厚度为12 nm.过厚或过薄均不利于Ir膜反射率的提高.经退火处理后,Ir膜中张应力有所释放但并未消除,同时晶粒平均尺寸显著增大,反射率下降.     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

Stereoselectivity and nonmigratory insertion mechanism of dimethylacetylene dicarboxylate into metallocene-hydride of Cp2M(L)H [Cp = η5-C5H5; M = Nb,V; L = CO,P (OMe)3]: A DFT study

The insertion of an alkyne into transition metal–hydrogen bonds is a key elementary step in catalytic polymerization and hydrogenation processes. It was found that a (Z)- or (E)-type alkyenyl complex can be formed through trans/cis stereospecific processes. In this work, the reaction mechanism of Cp₂M(L)H [Cp = η⁵-C₅H₅; M = Nb, V; L = CO, P (OMe)₃] with dimethylacetylene dicarboxylate (DMAD), and the factors influencing the stereoselectivity have been investigated based on density functional theory calculations. The calculated results show that all of the reactions are exothermic. For L = CO, the Z-isomer product forms first even at low temperatures because of the low Gibbs free energy barrier (ΔG^#). Then the Z-pro converts to E-pro , while for L = P (OMe)₃, the exclusive product is the E-isomer. For different metal centers, the reaction mechanisms of the Cp₂M(CO)H + DMAD (M = Nb and V) reaction are similar, while their products are different at room temperature. For M = Nb, because the energy barrier of the isomerization from Z-pro to E-pro is low and the relative free energies of Z-pro and E-pro are almost equal, both Z-pro and E-pro can be obtained. While for the Cp₂V(CO)H + DMAD reaction, only the Z-pro can be obtained under mild conditions, E-pro can be obtained only at high temperatures. For the Cp₂M(CO)H+DMAD(M=V and Nb) reactions, the formation of E-isomer products proceeds via two five-membered ring transition states. The calculated results provide an reasonable explanation for the experimental results and predict a new insertion reaction.