Study on the formation of the ketonic defects in the thermal degradation of ladder-type poly(p-phenylenes) by vibrational spectroscopy

We have investigated the thermal degradation in air by Fourier transform infrared spectroscopy of a ladder-type copolymer containing fluorene units in the backbone (Me-LPF), to reveal the formation of the ketonic defects. As thermal treatment of Me-LPF film at 200 degrees C in air proceeds, a new group of complex absorption bands due to degradation products arises in the range between 1800 and 1600 cm(-1). The observed overlapping bands were separated and assigned by utilizing the second-derivative IR spectral analysis, which can narrow the peak width to one-third of the originals and thereby eases the analysis. The degraded products were assigned as fluorenone (1718 cm(-1)) and benzophenone (Ar-(C=O)-Ar) (1665 cm(-1)), formed by the oxidation of the backbone, and acylphenone (Ar-(C=O)-R) (1685 cm(-1)) from the side chain. The fluorenone was found to be the major component among the degraded products in the main chain, and the time and temperature dependence indicated that the oxidation is a kind of autocatalytic radical-chain process. The oxidation can reach a very high degree (approximately 30% for 6 h oxidation at 240 degrees C estimated by absorption of the alkyl). Our results suggest the possibility of the oxidation of the 9-bialkylfluorene sites. We propose that the degradation of the alkyl in the side chain can help the radicals to propagate in the chain reaction.     

Ubiquitous strategy for probing ATR surface-enhanced infrared absorption at platinum group metal-electrolyte interfaces

A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.     

Syntheses and characterization of three hybrid materials based on polymeric copper complexes and saturated Keggin polyoxoanions

Three novel heteropolytungstates, [Cu(phen)₂]₄[α-SiW₁₂O₄₀] (1), [Cu₄(4,4′-bpy)₃(2,2′-bpy)₄][α-SiW₁₂O₄₀] · H₂O (2) and [Cu(4,4′-bpy)(4,4′-Hbpy)_0.5]₂[PW₁₂O₄₀] (3) (phen = 1,10-phenanthroline, 4,4′-bpy = 4,4′-bipyridine, 2,2′-bpy = 2,2′-bipyridine), have been synthesized and characterized by elemental analyses, IR, TG analyses and single-crystal X-ray diffraction. Compound (1) exhibits interesting chiral layer constructed from interperpendicular helical chains running along a crystallographic 2₁ axis in the c and a directions. Furthermore, the chiral layers are connected by the [α-SiW₁₂O₄₀]⁴⁻ anions via hydrogen bonding interactions to form a 3D superamolecular structure. The [Cu₄(4,4′-bpy)₃(2,2′-bpy)₄]⁴⁺ coordinated complexes in compound (2) are packed together via the aromatic π–π stacking interactions and exhibit an interesting 3D sandglasslike “host” network with 1D channels, in which [α-SiW₁₂O₄₀]⁴⁻ anions “guests” reside. Compound (3) has a unique 2D superamolecular network, which is composed of cationic Cu^I coordination polymer chains and discrete [PW₁₂O₄₀]³⁻ polyoxoanions as linkers. It is noteworthy that the monprotonated 4,4′-bpy ligands of (3) act as arms and connect the adjacent 2D network, generating a 3D interpenetrating superamolecular structure.     

Sequential C–O decarboxylative vinylation/C–H arylation of cyclic oxalates via a nickel-catalyzed multicomponent radical cascade

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis is described. This protocol utilizes a multicomponent radical cascade process, i.e. decarboxylative vinylation/1,5-HAT/aryl cross-coupling, to achieve efficient, site-selective dual-functionalization of saturated cyclic hydrocarbons in one single operation. This synergistic protocol provides straightforward access to sp³-enriched scaffolds and an alternative retrosynthetic disconnection to diversely functionalized saturated ring systems from the simple starting materials.

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis has been described.     

高多孔度多孔硅自支撑膜的制备与表征

发光多孔硅由于在光电子学方面的应用前景而引起人们极大的关注[1]．最近多孔硅发光二极管的研究方面取得了重大进展[2]。但是，有关多孔硅的发光机制仍然存在着争论[1，3，4]，利由于消除了单晶硅衬底的影响，对脱离了硅衬底的多孔硅自支撑膜能够进行普通多孔硅所不能进行的一     

TiO2-Al2O3复合载体的比较研究

对用混胶法和共沉淀法分别制备的ＴｉＯ２－Ａｌ２Ｏ３复合载体（ＴｉＯ２含量为０．０８ｇ／ｇγ－Ａｌ２Ｏ３）进行了对比研究，采用的表征方法有ＸＲＤ，ＸＲＳ，ＬＲＳ等，得出的结论如下：两种载体均保持了γ－Ａｌ２Ｏ３的骨架结构，但ＴｉＯ２的分散状态不尽相同，混胶样品中ＴｉＯ２主要以表面富集的形式分散在γ－Ａｌ２Ｏ３表面，这有利于集二者的优点于一体，共沉淀样品中ＴｉＯ２趋于整个体相均匀分散，这有利于相互作用     

Tunable surface-enhanced infrared absorption on au nanofilms on si fabricated by self-assembly and growth of colloidal particles

Au colloids were used to fabricate nanoscale-tunable Au nanofilms on silicon for surface-enhanced IR absorption bases in both ambient and electrochemical environments. This wet process incorporates the self-assembly of colloidal Au monolayer using 3-aminopropyl trimethoxysilane as the organic coupler with subsequent chemical plating in an Au(III)/hydroxylamine solution. FTIR spectroscopy in transmission mode of the probe species SCN- was used to evaluate the apparent surface enhancement in IR absorption of 2D Au colloid arrays and chemically plated Au particles. The nanostructure of Au films was examined by atomic force microscopy. The IR and AFM results show that the apparent surface enhancement factor (1-2 orders of magnitude) increases with increasing sizes and/or contact, and the severe aggregation of Au nanoparticles may cause the bipolar band shape. Cyclic voltammetry on the Au nanofilm obtained by the above nucleation and growth strategy exhibits a feasible electrochemical stability and behavior. In situ ATR-FTIR measurement of p-nitrobenzoic acid adsorption demonstrates that the as-grown Au film yields rather promising surface enhancement as well.     

Steric effects of substituted quinolines on lithium coordination geometry

The X-ray crystal structures of a series of lithium quinolates – lithium 8-hydroxyquinolinate (Liq), lithium 2-methyl-8-hydroxyquinolinate (MeLiq), and 2-phenyl-8-hydroxquinolinate (PhLiq), are compared. The substitution at the 2-position of the 8-hydroxyquinoline ligand has significant impact on the aggregation of the lithium complex in the crystalline state. Liq and MeLiq molecules crystallize as hexamers, whereas PhLiq crystallizes as a tetramer. The possible influence of crystal-packing forces on the preferred cluster structure was probed using density functional theory calculations on a systematically varied set of Liq, MeLiq, and PhLiq clusters. For Liq and MeLiq, the observed structures match the most stable computed structures. In the PhLiq case, the observed tetrameric structure is computed to be less stable (+1.2 kcal/mol/monomer) than the lowest energy structure, a hexamer. In this case, solid-state effects probably outweigh small differences in cluster stability.     

Effects of thermal history on the rigid amorphous phase in poly(phenylene sulfide)

The rigid amorphous phase of semicrystalline poly(phenylene sulfide) (PPS) has been studied as a function of thermal history using scanning calorimetry, dielectric relaxation, density, and small-angle x-ray scattering (SAXS). Based on the new heat of fusion of perfect crystalline PPS, which is 26.7±0.8 cal/gram, the weight fraction of rigid amorphous phase is shown to be nearly twice as large as previously reported [1]. The mass fraction of the rigid amorphous phase ranges from 0.24 to 0.42 and is dependent upon thermal treatment. We have taken the approach of assuming a three-phase model for the morphology of semicrystalline PPS consisting of crystalline lamellae, mobile amorphous, and rigid amorphous components. Using this three-phase model, we determine that the average density of the rigid amorphous fraction is 1.325 g/cc, which is slightly larger than the density of the mobile amorphous phase fraction and was insensitive to thermal history. From the SAXS long period, the layer thicknesses of the mobile amorphous phase, rigid amorphous phase, and crystal lamellae were estimated. Only the lamellar thickness shows a systematic variation with thermal history, increasing with melt or cold crystallization temperature, or with decreasing cooling rate.