Comparative study on composition, structure, and adsorption behavior of activated carbons derived from different synthetic waste polymers

The composition, structure, and adsorption behavior of activated carbons (ACs) derived from three different types of waste polymers, i.e., tire rubber (TR), polyvinyl chloride (PVC), and polyethyleneterephtalate (PET), by KOH activation were compared. The AC derived from PET exhibited the largest surface area (2831 m(2)/g) and pore volume (1.68 cm(3)/g) due to the homogenous aromatic composition of PET. The AC derived from PVC exhibited relatively lower surface area (2666 m(2)/g) but more narrowed pore size distribution (2-3 nm). The complex composition and high ash content of tire particles resulted in AC product with significantly lower surface area (398.5 m(2)/g) and heterogeneous pore width. Adsorption data of methylene blue (MB) were fitted well by Langmuir equation, indicating monolayer coverage on the ACs. The high oxygen content of PET-derived AC heavily affected its adsorption to MB and iodine. Due to the remarkable surface area and highly mesoporous structures, ACs based on both PET and PVC exhibited much higher adsorption capacities than that of TR and commercial coal-based AC (F400). This study demonstrates that the properties of ACs are highly dependent on their starting polymers and the potential of converting synthetic polymer waste into effective adsorbents for environmental remediation and cleanup.     

Design,fabrication and characterization of the X-ray supermirrors

With the development of the multiplayer technology, the multilayer mirrors have been widely used in many fields, such as the soft X-ray astronomical telescope, soft X-ray microscopy, extreme ultraviolet lithography, applications of synchrotron radiation, plasma diagnosis, and so on. However, in the hard X-ray region, especially for the wavelength shorter than 0.1 nm, the optical elements based on the traditional multilayers or the single high-Z metal coatings cannot accommodate the advancemen…     

Formation of a Copillar[5]arene‐Based Supramolecular Polymer in Solution and in the Solid State

A linear supramolecular polymer based on the self‐assembly of an easily available copillar[5]arene monomer is efficiently prepared, which is evidenced by the NMR spectroscopy, viscosity measurement, and DOSY experiment. The single‐crystal X‐ray analysis reveals that the polymerization of the AB‐type monomer is driven by the quadruple CH•••π interactions and one CH•••O interaction.

     

新型含N-杂环卡宾二硫化碳配体的锰铼金属双核化合物的合成、表征及电化学性质简

合成了一系列含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物,其中包括3种单核化合物和3种双核化合物,对它们的结构进行了表征,并研究其反应性和电化学性质. 与三烷基膦二硫化碳配体相比,含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物展现出不同的反应特性. 研究结果表明,[MnRe(CO)6(μ-H){μ-CH3SC(S)IMes2}]配合物具有催化质子还原成氢气的能力.     

二氧化碳膨胀乙醇体系中碳基金属复合物的合成及其催化和电化学性能(英文)

与块体材料相比,功能复合材料表现了更加优异的性能,而且比其中任何单一组分的性能都好,因此在催化、锂离子电池等领域得以广泛研究.通常情况下,在复合材料的制备中金属或金属氧化物粒子要求能够以足够小的粒径在基底上均匀分散,并实现活性组分负载量的可控.据报道,很多方法可以将金属(或氧化物)活性组分引入到载体之中,比如水热/溶剂热、水解、热分解、化学气相沉积等,但这些方法均存在如下缺点.第一,为了获得满意的负载量和可控包覆,碳基底需要预氧化处理使其表面含有丰富的含氧官能团.例如,由于碳纳米管自身的相容性和加工性较差,需要硝酸预氧化处理;石墨烯也需要预处理为石墨烯氧化物然后再进行第二组分的负载.但是,剧烈的氧化处理条件不可避免地造成对碳sp~2结构和电子特性的破坏,并且增加了繁杂的后续处理过程.第二,金属组分前驱体在基底上负载不完全,易形成自由粒子聚集在溶液中,从而降低活性组分的有效利用.第三,传统方法中由于使用水、乙醇等表面张力大的极性溶剂,导致粒子结晶再生长,形成的颗粒尺寸大,对催化剂会降低活性表面积及催化效率;对于电池材料会增加电极/电解液的接触面积,增加锂离子的扩散距离及电池充电过程的内部应力.而且,有机溶剂由于粘度大,不利于金属纳米粒子在基底上的均匀分散及合成过程的绿色化.因此,我们利用资源丰富,廉价的二氧化碳作为绿色溶剂,研究了二氧化碳膨胀的乙醇体系中金属(氧化物)纳米粒子在碳基底上均匀负载的方法.由于超临界二氧化碳具有独特的低粘度、"零"表面张力、高扩散能力、以及物性参数随温度和压力可调等特点,可以使金属(氧化物)前驱体不受液体毛细作用的限制在孔道中快速、均一地分散,保证孔结构稳定,对多孔复合材料的加工和制备表现了巨大的优势.同时,超临界二氧化碳的抗溶剂能力也能够有效降低乙醇和水引起的溶剂效应,从而降低纳米粒子之间的聚集.此外,通过改变前驱体的浓度可以精确调控表面组分的负载量.更重要的是,碳基底可以直接利用制备碳基复合材料,无需任何预处理及表面活性剂参与,避免了前处理对基底的形貌和电子特性的破坏.本综述首先介绍了超临界二氧化碳膨胀乙醇体系的属性,讨论了碳基复合材料在该体系中的形成机理.然后分别介绍了零维碳球、一维碳纳米管、二维石墨烯、三维多孔碳材料作为基底形成的一系列金属(氧化物)复合材料,及这些材料在催化和锂离子电池领域中的应用.最后,对超临界二氧化碳沉积方法的应用进行了总结和展望.     

复合功能布的动态力学性能及本构关系

针对复合功能布的物理特性,利用材料试验机和分离式Hopkinson压杆装置,展开了准静态和动态条件下单层和双层复合功能布材料的单轴抗压实验,获得了两种材料在不同应变率下的应力应变曲线和材料的失效应力、应变.实验结果表明:复合功能布的动态失效强度明显高于准静态失效强度,而且随着应变率的增加其动态失效强度呈现增加的趋势,即该材料具有明显的应变率硬化效应.对应力应变曲线进行拟合,给出了材料的动静态粘弹性本构关系.并对复合功能布在不同应变率下的失效应变及材料的损伤结果进行了初步的分析.     

基于多层次特征的跨场景服装检索

针对跨场景服装检索如何提取更有表述力的服装特征问题,提出了一种新的基于高层公共特征约束的相似性度量算法。首先,通过类别空间学习提取不同场景域的类别信息;然后,在场景域空间网络用类别信息约束传统对比损失函数,增大对类间负样本对的惩罚以减轻过拟合;最后,融合类别公共特征和域特定特征并通过类别判断进行辅助检索。分析和实验结果表明,新算法对跨场景服装检索的准确度要优于当前前沿的方法。     

用长旋转椭球坐标表示有限长带电直线的空间电势

利用长旋转椭球坐标直接证明有限长带电直线电荷在空间中产生的等势面是共焦长旋转椭球面.     

Template assisted synthesis of silica-coated molecular crystal nanorods: From hydrophobic to hydrophilic nanorods

We report a method for the preparation of silica-coated molecular crystal nanorods. A sol-gel method was used to make silica nanotubes inside anodized alumina templates. The nanotubes were then loaded with 9-anthracene carboxylic acid (9-AC) and solvent annealed to produce silica-coated organic nanorods. The core-shell structure was confirmed using electron microscopy, and the highly crystalline organic core was characterized using powder X-ray diffraction and transmission electron microscopy. The silica-coated 9-AC rods had much improved dispersal properties in aqueous solution, and were also able to undergo reversible bending under UV illumination, as observed previously for uncoated 9-AC rods. This work demonstrates that it is possible to make surface-coated molecular crystal nanorods that retain their useful functionalities.     

Molecular Engineering of Chalcogen-Embedded Anthanthrenes via peri-Selective C−H Activation: Fine-Tuning of Crystal Packing for Organic Field-Effect Transistors

Disclosed herein is a RhCl₃-catalyzed peri-selective C−H/C−H oxidative homo-coupling of 1-substituted naphthalenes, which provides a highly efficient and streamlined approach to chalcogen-embedded anthanthrenes from readily available starting materials. Introducing O, S, and Se into the anthanthrene skeleton leads to gradually increased π–π stacking distances but significantly enhanced π–π overlaps with the growth of the hetero-atom radius. Moderate π–π distance, overlap area, and intermolecular S−S interactions endow S-embedded anthanthrene ( PTT ) with excellent 2D charge-transport properties. Moreover, the transformation of p-type to n-type S-embedded anthanthrenes is realized for the first time via the S-atom oxidation from PTT to PTT-O4 . In organic field-effect transistor devices, PTT derivatives exhibit hole transport with mobilities up to 1.1 cm² V⁻¹ s⁻¹, while PTT-O4 shows electron transport with a mobility of 0.022 cm² V⁻¹ s⁻¹.