RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE BY CALIX[8]ARENE-NEODYMIUM*

Ring-opening polymerization of trimethylene carbonate (TMC) with a rare earth calixarene compound as catalysthas been studied for the first time. The effect of TMC/Nd (molar ratio) and polymerization conditions were investigated indetail. It was found that calix[8]arene-neodymium is a highly effective catalyst for the bulk polymerization of TMC and giveshigh molecular weight (M_v = 60,000) polymer. The optimum conditions of TMC polymerization were found to be asfollows:TMC/Nd (molar ratio) = 2,000, 80℃, 16 h. The polymers were characterized by NMR, GPC and DSC. Studying themechanism by NMR showed that the polymerization of TMC catalyzed by calix[8]arene-neodymium proceeds via a cationicmechanism.     

紫外光固化耐磨涂料的进展

综述了紫外光固化耐磨涂料的进展情况 ,着重介绍了溶胶 -凝胶法制备紫外光固化耐磨杂化涂料的研究进展。     

均四甲苯改性沥青的化学结构特征

平均结构参数分析法是分析沥青类复杂分子体系化学结构的一种有效方法。通过分析比较热处理改性沥青和均四甲苯改性沥青在化学结构上的不同 ,发现均四甲苯改性沥青中有机分子的分子量较大 ,但氢含量较高 ,芳香度较小 ,主要表现为脂肪环结构的增多和甲基取代基的大量引入。氢转移、质子化、亚甲基桥的形成可能是导致这些结构特征的主要原因。     

高效液相色谱法分离和测定白菜黑斑病菌中的腐败菌素B

建立了一种高效液相色谱分离和测定白菜黑斑病菌腐败菌素B的新方法。被真菌毒素感染的白菜病叶用乙酸乙酯萃取，用Nove-Pak C18柱进行分离，流动相为乙腈－水（1＋1），pH3.42，流速1．0mL/min，紫外检测波长206nm，腐败菌素B的分离时间是11．49min，检出限达到2．3ng，线性动态范围至少是3个数量级。本方法应用于白菜黑斑病叶样品的测定，并进行了回收率试验，腐败菌素B的5次测定值RSD≤1．2％，平均回收率≥97．1％。     

ZnO超微粒子光催化氧化降解n-C7H16的研究

利用ZnO光催化氧化技术对气相n-C7H16进行了降解研究，考察了氧气、水燕气体积分数等因素对n-C7H16光催化氧化的影响，利用气相色谱－质谱联用仪和气相色谱仪对气相光催化反应过程中的气体组成进行了定性分析，并对主要中间产物丙醛进行了定量分析，结果发现，ZnO超微粒子光催化氧化n-C7H16的降解率较高，n-C7H16绝大部分被完全氧化成CO2，探讨了n-C7H16光催化氧化反尖的动力学行为及机理。     

2,4,6-三硝基苯酚改性锆铝复合氧化物固定相分离富勒烯的色谱性能研究

制备了用于分离C60和C70的2，4，6－三硝基苯酚改性锆铝复合氧化物高效液相色谱固定相，考察了流动相中甲苯的含量、柱温及流速对C60和C70分离的影响，同时比较了酸腐蚀前后锆铝复合氧化物基质对分离的影响，结果表明，2，4，6－三硝基苯酚改性酸腐蚀后锆铝复合氧化物填料对富勒烯表现出较强的分离能力，具有作为富勒烯制备分离的潜力。     

塑料成型工艺实习CAI课件的开发

针对当前学生实习面临的困难，以Authorware为开发工具，编制了塑料成型工艺实习CAI课件，整个软件图文并茂，图像，动画，解说，音乐相结合，形象地介绍了塑料各种成型工艺的主要原理，生产设备，工艺流程和相关产品，应用本软件学生可以进行模拟实习，该软件激发了学生学习的兴趣，提高了实习质量。     

超支化聚氨酯固体电解质导电性能的光谱学研究

用超支化聚氨酯 +线性聚氨酯作为基体 ,LiClO4作为离子源制得聚合物固体电解质 .用Raman光谱 ,FTIR光谱等光谱学方法研究了聚合物电解质中盐离子和聚合物基团之间的相互作用 .研究表明超支化聚氨酯对盐有较好的溶解作用 .研究还表明超支化聚氨酯加入有利于提高体系的电导率     

Effect of La2O3／γ—Al2O3 Catalyst on the Activation of CH4 and CO2 to C2 Hydrocarbons under Non—equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocabons under non-equilibrium plasma, methane conversion was decreased,but selectivity of C2 hydroxarbons was increased when using La2O3/γ-Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/γ-Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd-La2O3/γ-Al2O3 was used as catalyst,the major C2 product was ethylene.     

Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.